HTC One X LCD Backlight Problem - Page 7 - GSM-Forum

bluehawk20 · 12-18-2013, 12:20

Can anyone tell what is the model code for the 2.2uh inductor?

The 220 coil is 220MR34.How about another coil?

blueteamgsm · 12-20-2013, 11:54

Is any body has battery ways diagram for HTC ONE X?
Somebody remove battery pins from logic board and i need to fix it.
Please for goot gift before Christmas

.

Regards BTG

baloo2000 · 01-04-2014, 07:54

is very solution tested many times by me.

uelleu · 01-04-2014, 08:10

Quote:

Originally Posted by yashp71

hi i got an issue,i have one x and lcd was flickering i thaught its lcd,i baught another one and tested it workd fine but the bottom side sensor was not working so i thaught let me order oter lcds and i got another stock after one weak i have tried 2-3 lcd including the privious one which was displaying before but no luck there was no display on phone on any of them,its a strange thing,has anybody solved this issue

its the processor which is having a problem. you can feel it it goes extremely hot during operation. its not the LCD that has a problem. its the board itself.

DRmkh · 01-08-2014, 14:02

hello friends
i had this problem with htc one x (light problem).i try to change 220 coil with 2.2 from nokia n73 camera circuit 2 times,everytime coils damaged after about ten minutes. but last time i am replace that with coil from back side of n73 board(camera flasher).now it works good .

DRmkh · 01-08-2014, 14:12

in other htc one x i change it with betty's coil from nk 5610 board and saw good result.

bluehawk20 · 01-12-2014, 11:41

Replaced coil,inductor and ic.Light working but now phone wont charge.When insert usb phone shut down.pls help

andyanti · 01-17-2014, 13:29

please LED LCD way, because I had to replace the 3 part still does not turn on the backlight. where is the pin Vled(+) and Vled(-) ?

racedriver89 · 02-13-2014, 10:35

Hello friends,

i have the same problem. the coil 220 seems to be ok. when i am pressing under the htc logo on the screen and under the camera on the backside together the phone is for some minutes working. it seems to be a defective contact. i have checked an cleaned all cables and connections. has anyone suggestions for a solution?

thanks

vaishnavi elec · 02-13-2014, 13:10

After replacement of complete LCD with Touchpad of HTC one X touch pad is not working,
I have checked touchpad is OK. ther is a fault in PCB.

Please help me......

ratass · 03-16-2014, 19:29

Quote:

Originally Posted by myshy93

thx man, problem solved by replace the 220 coil

coil from nokia 5310

Hello, where did you fint 220 coil please? I can see only two coil, but too big. Thank you

myshy93 · 03-17-2014, 18:08

Try sony erricsson board, k800 w800 that have 220coil marked

ratass · 03-17-2014, 23:09

coil 220 solved the problem for me ! thank you a lot guys ! I took it from Nokia 6300

sunny_lad · 03-25-2014, 02:16

Thank you every one. 220 coil solved my problem aswell. I got one out of an old Nokia board.

Sent from my Nexus 4 using Tapatalk

matrx10503 · 04-22-2014, 18:48

Temporary solution for some:

You need to pinch with two fingers the front and back of the phone at these locations indicated:

03-17-2014, 23:09	#103 (permalink)
ratass Junior Member Join Date: Mar 2014 Posts: 3 Member: 2149199 Status: Offline Thanks Meter: 0	220 solved the problem for me ! coil 220 solved the problem for me ! thank you a lot guys ! I took it from Nokia 6300

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

12-18-2013, 12:20	#91 (permalink)
bluehawk20 Freak Poster Join Date: Nov 2008 Posts: 235 Member: 895045 Status: Offline Thanks Meter: 14	Can anyone tell what is the model code for the 2.2uh inductor? The 220 coil is 220MR34.How about another coil?

12-20-2013, 11:54	#92 (permalink)
blueteamgsm Freak Poster Join Date: Aug 2007 Location: Ireland Age: 45 Posts: 279 Member: 564247 Status: Offline Thanks Meter: 34	Is any body has battery ways diagram for HTC ONE X? Somebody remove battery pins from logic board and i need to fix it. Please for goot gift before Christmas . Regards BTG

01-04-2014, 07:54	#93 (permalink)
baloo2000 No Life Poster Join Date: Oct 2007 Location: nigeria Posts: 561 Member: 601591 Status: Offline Thanks Meter: 86	is very solution tested many times by me.

01-08-2014, 14:02	#95 (permalink)
DRmkh Junior Member Join Date: Feb 2009 Posts: 10 Member: 964892 Status: Offline Thanks Meter: 1	hello friends i had this problem with htc one x (light problem).i try to change 220 coil with 2.2 from nokia n73 camera circuit 2 times,everytime coils damaged after about ten minutes. but last time i am replace that with coil from back side of n73 board(camera flasher).now it works good .

01-08-2014, 14:12	#96 (permalink)
DRmkh Junior Member Join Date: Feb 2009 Posts: 10 Member: 964892 Status: Offline Thanks Meter: 1	in other htc one x i change it with betty's coil from nk 5610 board and saw good result.

01-12-2014, 11:41	#97 (permalink)
bluehawk20 Freak Poster Join Date: Nov 2008 Posts: 235 Member: 895045 Status: Offline Thanks Meter: 14	Replaced coil,inductor and ic.Light working but now phone wont charge.When insert usb phone shut down.pls help

01-17-2014, 13:29	#98 (permalink)
andyanti Junior Member Join Date: May 2007 Posts: 15 Member: 505718 Status: Offline Thanks Meter: 2	please LED LCD way, because I had to replace the 3 part still does not turn on the backlight. where is the pin Vled(+) and Vled(-) ?

02-13-2014, 10:35	#99 (permalink)
racedriver89 Junior Member Join Date: Feb 2014 Posts: 1 Member: 2127460 Status: Offline Thanks Meter: 0	Hello friends, i have the same problem. the coil 220 seems to be ok. when i am pressing under the htc logo on the screen and under the camera on the backside together the phone is for some minutes working. it seems to be a defective contact. i have checked an cleaned all cables and connections. has anyone suggestions for a solution? thanks

02-13-2014, 13:10	#100 (permalink)
vaishnavi elec Junior Member Join Date: Feb 2008 Location: India Posts: 3 Member: 703253 Status: Offline Thanks Meter: 0	After replacement of complete LCD with Touchpad of HTC one X touch pad is not working, I have checked touchpad is OK. ther is a fault in PCB. Please help me......

03-17-2014, 18:08	#102 (permalink)
myshy93 Junior Member Join Date: Jul 2012 Posts: 3 Member: 1790688 Status: Offline Thanks Meter: 0	Try sony erricsson board, k800 w800 that have 220coil marked

03-25-2014, 02:16	#104 (permalink)
sunny_lad Insane Poster Join Date: Jan 2014 Posts: 87 Member: 2110834 Status: Offline Thanks Meter: 9	Thank you every one. 220 coil solved my problem aswell. I got one out of an old Nokia board. Sent from my Nexus 4 using Tapatalk

04-22-2014, 18:48	#105 (permalink)
matrx10503 Junior Member Join Date: Jan 2010 Posts: 19 Member: 1197536 Status: Offline Thanks Meter: 4	Temporary solution for some: You need to pinch with two fingers the front and back of the phone at these locations indicated: