I am news user jtag samsung i9070p is supported

[goudio]

I am news user jtag samsung i9070p is supported ????

[Medusa Box]

Hello.

Repairing GT-I9070 is supported. You can try to repair your GT-I9070p as GT-I9070 and then re-flash it with GT-I9070p firmware.

To repair your device via JTAG do the following:

1. Install the latest Medusa Software v.2.6.1.4 (Medusa Box Downloads - Software, Drivers, Manual).
2. Select Samsung GT-I9070 from Software list, press "Help" button to look at JTAG pinout picture and carefully solder all necessary JTAG wires.
3. Connect the device via JTAG cable to Box.
4. Connect the device to PC via USB cable (use both connection JTAG and USB cable).
5. Install U8500 driver (if driver was not installed automatically) from folder "C:\Program Files\GSMServer\Medusa\Driver\U8500\".
6. Select "EasyRepair" Mode, press "EasyRepair" button and follow "EasyRepair" wizard steps to repair the device.

Note: This phone can connect more longer, so You need to wait 30-50 seconds.


Also repairing GT-I9070 is supported via eMMC (ISP) connection:

1. Install the latest version of Medusa Pro Software (Medusa Box Downloads - Software, Drivers, Manual).
2. Download SRF (Smart Repair File) for Samsung GT-I9070 via "Download *.srf" button in Software.
3. Select "eMMC" interface option in Software.
4. Select Samsung GT-I9070 in Software list (device model will appear in Software list after You download SRF).
5. Solder all necessary eMMC wires accordingly to the pinout picture ("Help" or "Pinout" button in Software).
6. Connect the device to Box and press "Connect" button.
7. When device will be connected successfully, do "Smart Repair" ("Smart repair" button in Software).
8. Disconnect the phone from Box and try to put it into Download Mode.
9. Post here the result.


Also You can do "Factory Repair", using original Samsung firmware for GT-I9070p: connect the phone (steps 1-6), go to "Factory repair" tab in Software, select proper PIT file and the latest original Samsung firmware for GT-I9070p and write them.


Also please look here:

http://forum.gsmhosting.com/vbb/9423835-post1.html,
http://forum.gsmhosting.com/vbb/f664...5/#post9592060,
http://forum.gsmhosting.com/vbb/9504749-post564.html,
http://forum.gsmhosting.com/vbb/f664...5/#post9585732,
http://forum.gsmhosting.com/vbb/f664.../#post10277694,
http://forum.gsmhosting.com/vbb/f664...4/#post9438787,
http://forum.gsmhosting.com/vbb/9423877-post4.html,

http://forum.gsmhosting.com/vbb/f664...l#post12079051.

https://www.youtube.com/results?sear...a+box+GT-I9070,

[goudio]

i dont have medussa box only octopulus jtag

[Medusa Box]

i dont have medussa box only octopulus jtag

They have the same possibility. You can use Octoplus JTAG Software v.1.9.5.3 or Medusa Software v.2.6.1.4 with your Octoplus Box. Also You can use the latest versions of Octoplus Pro and Medusa Pro Software.