Read error [Answered]

[LEENO]

Huawei Mya-L11
HYNIX H9TQ17ABJTBC
​​​​​​​CPU MT6737V​​​​​​​

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID : 90014A484147346132D421E7AC8D8467
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 13.4
Product serial number : (hex) 21E7AC8D
Manufacturing date : 08/2017
---------------------------------------------------------------
CSD Info

CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file D:/CELSW/OCTOPLUS/MEDUSA PRO/EXT_CSD Backups/HAG4a2_18_06_2020_19_02_01.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.1; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00006400) 12.5 MB
P03: protect1 (00008000, 00005000) 10 MB
P04: protect2 (0000D000, 00007000) 14 MB
P05: lk (00014000, 00000400) 512 KB
P06: lk2 (00014400, 00000400) 512 KB
P07: para (00014800, 00000400) 512 KB
P08: boot (00014C00, 00008000) 16 MB
P09: recovery (0001CC00, 00020000) 64 MB
P10: logo (0003CC00, 00004000) 8 MB
P11: expdb (00040C00, 00005000) 10 MB
P12: ROOTM (00045C00, 00002400) 4.5 MB
P13: seccfg (00048000, 00004000) 8 MB
P14: oemkeystore (0004C000, 00004000) 8 MB
P15: secro (00050000, 00004000) 8 MB
P16: keystore (00054000, 00004000) 8 MB
P17: tee1 (00058000, 00002800) 5 MB
P18: tee2 (0005A800, 00002800) 5 MB
P19: log (0005D000, 00020000) 64 MB
P20: oeminfo (0007D000, 00024000) 72 MB
P21: erecovery (000A1000, 00020000) 64 MB
P22: frp (000C1000, 00000800) 1024 KB
P23: nvdata (000C1800, 00010000) 32 MB
P24: metadata (000D1800, 00012800) 37 MB
P25: system (000E4000, 00600000) 3072 MB
P26: cust (006E4000, 000C8000) 400 MB
P27: cache (007AC000, 00064000) 200 MB
P28: userdata (00810000, 01541C00) 10.63 GB
P29: flashinfo (01D51C00, 00008000) 16 MB
Backuping oeminfo partition...
Opening D:/CELSW/OCTOPLUS/MEDUSA PRO/Backups/HAG4a2_oeminfo_0x7d000_0x24000_18_06_2020_19_02_01 .bin file...
Reading. Please wait...
ERROR[011]: Read error.

[Octopus box]

Hello.

Please, try to uncheck "backup security partitions" at Welcome tab, after try to do Read operation, if problem will still remain, try to set up another speed Value