lg d801 no network - GSM-Forum

clippy165 · 11-06-2014, 17:50

lg d801 no network after repair imei

Welcome to Octoplus/Octopus Box LG Software version 1.7.3
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM51
Selected model: D801
Reading info...OK
Mode: Normal
Model ID: D801
Firmware compiled date: Jan 12 2014
Firmware compiled time: 00:00:00
Firmware released date: Jun 2 2014
Firmware released time: 23:54:00
SW Version: M8974A-AAAANAZM-1.0.190084
IMEI: 990003-36-858182-9
SPC: 000000
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM51
Selected model: D801
Reading info...OK
Mode: Normal
Model ID: D801
Firmware compiled date: Jan 12 2014
Firmware compiled time: 00:00:00
Firmware released date: Jun 2 2014
Firmware released time: 23:54:00
SW Version: M8974A-AAAANAZM-1.0.190084
IMEI: 990003-36-858182-9
SPC: 000000
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D801_990003368581829_06-11-2014_10-43-45.SEC"
Writing security area...OK
Switching to Normal mode...
Found model D801 at port COM51
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM51
Selected model: D801
Reading info...OK
Mode: Normal
Model ID: D801
Firmware compiled date: Jan 12 2014
Firmware compiled time: 00:00:00
Firmware released date: Jun 2 2014
Firmware released time: 23:54:00
SW Version: M8974A-AAAANAZM-1.0.190084
SPC: 000000
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM51
Selected model: D801
Reading info...OK
Mode: Normal
Model ID: D801
Firmware compiled date: Jan 12 2014
Firmware compiled time: 00:00:00
Firmware released date: Jun 2 2014
Firmware released time: 23:54:00
SW Version: M8974A-AAAANAZM-1.0.190084
SPC: 000000
Fixing IMEI...
New IMEI: 990003-36-858182-9
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "D801_Bad_06-11-2014_10-49-28.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D801_Bad_06-11-2014_11-03-37.SEC"
Writing security area...OK
Switching to Normal mode...
Found model D801 at port COM51
Send SPC...OK
Writing QCN...
Writing EFS...OK
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing Provisioning Items...OK
Writing QCN done!
IMEI successfully fixed!
To complete the operation, please make Factory Reset (Go to "Settings" ->
"General" -> "Backup & reset" -> "Factory data reset", press "Reset
phone" and "Erase everything" buttons).
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM51
Selected model: D801
Reading info...OK
Mode: Normal
Model ID: D801
Firmware compiled date: Jan 12 2014
Firmware compiled time: 00:00:00
Firmware released date: Jun 2 2014
Firmware released time: 23:54:00
SW Version: M8974A-AAAANAZM-1.0.190084
IMEI: 990003-36-858182-9
SPC: 000000

Octopus box · 11-06-2014, 18:01

Try to write this QCN: https://mega.co.nz/#!GxozgZJJ!wnjZKy...uuf885DWQR5zOc and say the result. If this will not help, try to do the next:

1. Write the first Security backup "D801_990003368581829_06-11-2014_10-43-45.SEC" back into the phone to return the phone to the previous state.
2. Re-start the phone.
3. Uncheck (unmark) the "Skip Read/Write QCN during the Repair IMEI" option in the Software at "Repair IMEI / BT" tab in the Software.
4. Make Repair IMEI operation again.
5. Post here the result.

clippy165 · 11-07-2014, 19:25

Quote:

Originally Posted by Octopus box

Try to write this QCN: https://mega.co.nz/#!GxozgZJJ!wnjZKy...uuf885DWQR5zOc and say the result. If this will not help, try to do the next:

1. Write the first Security backup "D801_990003368581829_06-11-2014_10-43-45.SEC" back into the phone to return the phone to the previous state.
2. Re-start the phone.
3. Uncheck (unmark) the "Skip Read/Write QCN during the Repair IMEI" option in the Software at "Repair IMEI / BT" tab in the Software.
4. Make Repair IMEI operation again.
5. Post here the result.

the qcn file you provided did not allow service. I tried repair/reset security and phone will not go into download mode?? i have two d801

Octopus box · 11-08-2014, 08:08

Please perfrom steps 1-4 mentioned above and post here full Software log.

clippy165 · 11-08-2014, 18:33

Quote:

Originally Posted by Octopus box

Please perfrom steps 1-4 mentioned above and post here full Software log.

i am trying to do on lg software. i think is problem with new software update. never happen before update software. the phone will not go into download mode i tried volume + and usb, even minimal adb "adb reboot download' not working

is possible you can provide me with previous octoplus lg installer version 1.6.9

Octopus box · 11-09-2014, 09:16

Quote:

the phone will not go into download mode

To Put the phone into Emergency Mode, power phone OFF, press and hold "Vol+" button and connect the USB cable. Connect USB cable directly to motherboard USB port, don't use any USB hubs or PCI USB extention cards, this is important.

Please perform steps 1-4 and post here full Software log with all of them, we should see, where can be the problem with your device.

clippy165 · 11-10-2014, 17:34

Quote:

Originally Posted by Octopus box

To Put the phone into Emergency Mode, power phone OFF, press and hold "Vol+" button and connect the USB cable. Connect USB cable directly to motherboard USB port, don't use any USB hubs or PCI USB extention cards, this is important.

Please perform steps 1-4 and post here full Software log with all of them, we should see, where can be the problem with your device.

the problem is after write security backup phone will not go into download anymore. i have no down or recovery. i firmware restore. help

Octopus box · 11-10-2014, 19:01

Fully charge phone's battery by using external charger and try to make Repair Securiry, try ot make Reset Security. Post here full Software log.

clippy165 · 11-16-2014, 19:21

Welcome to Octoplus/Octopus Box LG Software version 1.7.5
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...OK
Checking root access...Failed!
Error code: ADB0000001
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
Waiting for phone...OK
Checking root access...Failed!
Error code: ADB0000001
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Converting files...
Unpacking "PrimaryGPT"...OK
Unpacking "modem"...OK
Unpacking "sbl1"...OK
Unpacking "dbi"...OK
Unpacking "aboot"...OK
Unpacking "rpm"...OK
Unpacking "boot"...OK
Unpacking "tz"...OK
Unpacking "misc"...OK
Unpacking "persist"...OK
Unpacking "recovery"...OK
Unpacking "laf"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "system"...OK
Unpacking "cache"...OK
Unpacking "cache"...OK
Unpacking "cache"...OK
Unpacking "cache"...OK
Unpacking "cache"...OK
Unpacking "cache"...OK
Unpacking "cache"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "userdata"...OK
Unpacking "BackupGPT"...OK
Unpacking done. Processing files...
Identifying sub-files...OK
Creating destination file...OK
Deleting temporary files...
Deleting directory "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-
01-V10c-310-260-AUG-13-2013+0\"...
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\aboot.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\BackupGPT.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\boot.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\cache.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\dbi.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\laf.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\misc.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\modem.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\parts.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\persist.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\PrimaryGPT.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\recovery.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\rpm.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\sbl1.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\system.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\tz.bin"...OK
Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\userdata.bin"...OK
Directory "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01-
V10c-310-260-AUG-13-2013+0\" succesfully deleted!
Firmware convert done!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Checking data...OK
Writing NVM...Failed!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D801_Bad_16-11-2014_12-57-02.SEC"
Writing security area...OK
Switching to Normal mode...
Found model D801 at port COM63
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Normal
Model ID: D801
Firmware compiled date: Jan 12 2014
Firmware compiled time: 00:00:00
Firmware released date: Jun 2 2014
Firmware released time: 23:54:00
SW Version: M8974A-AAAANAZM-1.0.190084
SPC: 000000
Opening "D801_990003368581829_05-11-2014_19-57-05.SEC"...
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D801_Bad_16-11-2014_13-02-10.SEC"
Writing security area...Failed!
Error code: ZXLCALSZXC0
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...Canceled!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: D801
Reading info...OK
Mode: Emergency
Initializing flash...OK
Model ID: LG-D801
SW version: LGD801AT-00-V20e-TMO-US-JUN-03-2014+0
LAF Version: 1.0
Product ID: BS02S130925001050
IMEI: 000000-00-000000-0
Target operator: TMO
Hardware: rev_10
Battery level: 7%
Fixing IMEI...
New IMEI: 990003-36-858182-9
Switching to Normal mode...
Found model D801 at port COM63
Skip Read/Write QCN
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D801_000000000000000_16-11-2014_13-11-04.SEC"
Writing security area...OK
Switching to Normal mode...
Found model D801 at port COM63
IMEI successfully fixed!
To complete the operation, please make Factory Reset (Go to "Settings" ->
"General" -> "Backup & reset" -> "Factory data reset", press "Reset
phone" and "Erase everything" buttons).

bebiloku · 07-26-2016, 12:52

Quote:

Originally Posted by Octopus box

Try to write this QCN: https://mega.co.nz/#!GxozgZJJ!wnjZKy...uuf885DWQR5zOc and say the result. If this will not help, try to do the next:

1. Write the first Security backup "D801_990003368581829_06-11-2014_10-43-45.SEC" back into the phone to return the phone to the previous state.
2. Re-start the phone.
3. Uncheck (unmark) the "Skip Read/Write QCN during the Repair IMEI" option in the Software at "Repair IMEI / BT" tab in the Software.
4. Make Repair IMEI operation again.
5. Post here the result.

hello please upload again

Octopus box · 07-26-2016, 13:56

Quote:

Originally Posted by bebiloku

hello please upload again

Hello.

All QCN files are available at the Support Area, please check this path: LG/QCN

11-06-2014, 17:50	#1 (permalink)
clippy165 Freak Poster Join Date: Apr 2010 Posts: 259 Member: 1288575 Status: Offline Thanks Meter: 36	lg d801 no network lg d801 no network after repair imei Welcome to Octoplus/Octopus Box LG Software version 1.7.3 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM51 Selected model: D801 Reading info...OK Mode: Normal Model ID: D801 Firmware compiled date: Jan 12 2014 Firmware compiled time: 00:00:00 Firmware released date: Jun 2 2014 Firmware released time: 23:54:00 SW Version: M8974A-AAAANAZM-1.0.190084 IMEI: 990003-36-858182-9 SPC: 000000 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM51 Selected model: D801 Reading info...OK Mode: Normal Model ID: D801 Firmware compiled date: Jan 12 2014 Firmware compiled time: 00:00:00 Firmware released date: Jun 2 2014 Firmware released time: 23:54:00 SW Version: M8974A-AAAANAZM-1.0.190084 IMEI: 990003-36-858182-9 SPC: 000000 Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D801_990003368581829_06-11-2014_10-43-45.SEC" Writing security area...OK Switching to Normal mode... Found model D801 at port COM51 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM51 Selected model: D801 Reading info...OK Mode: Normal Model ID: D801 Firmware compiled date: Jan 12 2014 Firmware compiled time: 00:00:00 Firmware released date: Jun 2 2014 Firmware released time: 23:54:00 SW Version: M8974A-AAAANAZM-1.0.190084 SPC: 000000 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM51 Selected model: D801 Reading info...OK Mode: Normal Model ID: D801 Firmware compiled date: Jan 12 2014 Firmware compiled time: 00:00:00 Firmware released date: Jun 2 2014 Firmware released time: 23:54:00 SW Version: M8974A-AAAANAZM-1.0.190084 SPC: 000000 Fixing IMEI... New IMEI: 990003-36-858182-9 Reading QCN... Send SPC...OK Reading Mobile Property...OK Reading Feature Mask...OK Reading Roaming List 0...OK Reading NV_Numbered Items...OK Reading NV_Numbered SIM1 Items...OK Reading NV_Numbered SIM2 Items...OK Reading NV Items...OK Reading EFS...OK Reading Provisioning Items...OK Reading QCN done! Backup saved to "D801_Bad_06-11-2014_10-49-28.qcn" Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D801_Bad_06-11-2014_11-03-37.SEC" Writing security area...OK Switching to Normal mode... Found model D801 at port COM51 Send SPC...OK Writing QCN... Writing EFS...OK Writing NV_Numbered Items...OK Writing NV_Numbered SIM1 Items...OK Writing NV_Numbered SIM2 Items...OK Writing Provisioning Items...OK Writing QCN done! IMEI successfully fixed! To complete the operation, please make Factory Reset (Go to "Settings" -> "General" -> "Backup & reset" -> "Factory data reset", press "Reset phone" and "Erase everything" buttons). -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM51 Selected model: D801 Reading info...OK Mode: Normal Model ID: D801 Firmware compiled date: Jan 12 2014 Firmware compiled time: 00:00:00 Firmware released date: Jun 2 2014 Firmware released time: 23:54:00 SW Version: M8974A-AAAANAZM-1.0.190084 IMEI: 990003-36-858182-9 SPC: 000000

11-10-2014, 19:01	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Fully charge phone's battery by using external charger and try to make Repair Securiry, try ot make Reset Security. Post here full Software log. Last edited by Octopus box; 11-11-2014 at 08:22.

11-06-2014, 18:01	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Try to write this QCN: https://mega.co.nz/#!GxozgZJJ!wnjZKy...uuf885DWQR5zOc and say the result. If this will not help, try to do the next: 1. Write the first Security backup "D801_990003368581829_06-11-2014_10-43-45.SEC" back into the phone to return the phone to the previous state. 2. Re-start the phone. 3. Uncheck (unmark) the "Skip Read/Write QCN during the Repair IMEI" option in the Software at "Repair IMEI / BT" tab in the Software. 4. Make Repair IMEI operation again. 5. Post here the result.

11-08-2014, 08:08	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,850 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,413	Please perfrom steps 1-4 mentioned above and post here full Software log.

11-16-2014, 19:21	#9 (permalink)
clippy165 Freak Poster Join Date: Apr 2010 Posts: 259 Member: 1288575 Status: Offline Thanks Meter: 36	Welcome to Octoplus/Octopus Box LG Software version 1.7.5 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK ADB Server was found. Trying to kill... Waiting for phone...OK Checking root access...Failed! Error code: ADB0000001 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK Waiting for phone...OK Checking root access...Failed! Error code: ADB0000001 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK Waiting for phone...Failed! Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK Waiting for phone...Failed! Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK ADB Server was found. Trying to kill... Waiting for phone...Failed! Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK Waiting for phone...Failed! Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Initializing ADB...OK ADB Server was found. Trying to kill... Waiting for phone...Failed! Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Converting files... Unpacking "PrimaryGPT"...OK Unpacking "modem"...OK Unpacking "sbl1"...OK Unpacking "dbi"...OK Unpacking "aboot"...OK Unpacking "rpm"...OK Unpacking "boot"...OK Unpacking "tz"...OK Unpacking "misc"...OK Unpacking "persist"...OK Unpacking "recovery"...OK Unpacking "laf"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "system"...OK Unpacking "cache"...OK Unpacking "cache"...OK Unpacking "cache"...OK Unpacking "cache"...OK Unpacking "cache"...OK Unpacking "cache"...OK Unpacking "cache"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "userdata"...OK Unpacking "BackupGPT"...OK Unpacking done. Processing files... Identifying sub-files...OK Creating destination file...OK Deleting temporary files... Deleting directory "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT- 01-V10c-310-260-AUG-13-2013+0\"... Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\aboot.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\BackupGPT.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\boot.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\cache.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\dbi.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\laf.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\misc.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\modem.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\parts.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\persist.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\PrimaryGPT.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\recovery.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\rpm.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\sbl1.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\system.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\tz.bin"...OK Deleting file "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\userdata.bin"...OK Directory "C:\Users\octoplus\AppData\Local\Temp\BIN_LGD8 01AT-01- V10c-310-260-AUG-13-2013+0\" succesfully deleted! Firmware convert done! -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Checking data...OK Writing NVM...Failed! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D801_Bad_16-11-2014_12-57-02.SEC" Writing security area...OK Switching to Normal mode... Found model D801 at port COM63 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Normal Model ID: D801 Firmware compiled date: Jan 12 2014 Firmware compiled time: 00:00:00 Firmware released date: Jun 2 2014 Firmware released time: 23:54:00 SW Version: M8974A-AAAANAZM-1.0.190084 SPC: 000000 Opening "D801_990003368581829_05-11-2014_19-57-05.SEC"... Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D801_Bad_16-11-2014_13-02-10.SEC" Writing security area...Failed! Error code: ZXLCALSZXC0 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...Canceled! -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM63 Selected model: D801 Reading info...OK Mode: Emergency Initializing flash...OK Model ID: LG-D801 SW version: LGD801AT-00-V20e-TMO-US-JUN-03-2014+0 LAF Version: 1.0 Product ID: BS02S130925001050 IMEI: 000000-00-000000-0 Target operator: TMO Hardware: rev_10 Battery level: 7% Fixing IMEI... New IMEI: 990003-36-858182-9 Switching to Normal mode... Found model D801 at port COM63 Skip Read/Write QCN Switching to Download mode...OK Initializing flash...OK Reading partition...OK Reading security area...OK Backup saved to "D801_000000000000000_16-11-2014_13-11-04.SEC" Writing security area...OK Switching to Normal mode... Found model D801 at port COM63 IMEI successfully fixed! To complete the operation, please make Factory Reset (Go to "Settings" -> "General" -> "Backup & reset" -> "Factory data reset", press "Reset phone" and "Erase everything" buttons).