Lg g3 mcafee disabled by kill switch [Solved]

[shahsoft]

Originally Posted by moeberri

can you send the pic of the testpoint and how its preformed

The tespoint picture is in octoplus lg software

[Octopus box]

Originally Posted by moeberri

can you send the pic of the testpoint and how its preformed

Hello.

Please, run Software, select correct phone model, press Cable & Manual button and read Software manual carefully, test point picture are there.

[faisal jee]

Welcome to Octoplus/Octopus Box LG Software version 2.3.2
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM118
Selected model: D850
To deactivate Kill Switch do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with
Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-
USB QDLoader 9008".
3. Release testpoint.OK
Sending loader...OK
Connecting to server ...OK
Initializing device...OK
Deactivating Kill Switch...OK
Please, reconnect the battery, put the phone in download mode manually
and re-flash the phone.
Performed by 2.3.2 software version.

SET DEAD Aany salution

[Octopus box]

Hello.

Please, make sure that battery is fully charged, try to put the phone into Emergency(Download ) mode manually and reflash the phone.

[faisal jee]

all steps check but same

still dead only qualcomm driver

[Octopus box]

Please check whether phone enters Download/Emergency Mode. If it doesn't - You need to repair boot loaders via eMMC/JTAG.

[froyd777]

Checking data...08.07.2016 23:06:27 > OK
08.07.2016 23:06:27 > Platform: LG Qualcomm
08.07.2016 23:06:27 > Selected port: COM256
08.07.2016 23:06:27 > Selected model: D850
08.07.2016 23:06:27 > To deactivate Kill Switch do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.
08.07.2016 23:06:28 > OK
08.07.2016 23:06:28 > Sending loader...08.07.2016 23:06:32 > OK
08.07.2016 23:06:32 > Connecting to server ...08.07.2016 23:06:35 > OK
08.07.2016 23:06:36 > Initializing device...08.07.2016 23:06:38 > OK
08.07.2016 23:06:38 > Deactivating Kill Switch...08.07.2016 23:06:38 > OK
08.07.2016 23:06:38 > Please, reconnect the battery, put the phone in download mode manually and re-flash the phone.
08.07.2016 23:06:38 > Performed by 2.3.5 software version.

[Ashikulislam]

Hello Octopus Team Please Support LG-D631 KillSwitch Test Pinout

[Octopus box]

Hello.

Unfortunately, we don't have solution to remove Mcaffe for this phone model at the moment.

[badman5]

Hello Octopus Team Please Support LG-D631 KillSwitch Test Pinout

[Biscosunny]

Originally Posted by Octopus box

Hello.

Unfortunately, Deactivate Kill Switch isn't supported for this phone model, we will try to add support in future updates.

Please team add solution to lg d631 killswitch... I have one here too. thanks, best team

[lyes_albert]

Originally Posted by moeberri

can you send the pic of the testpoint and how its preformed

Sélect the desired model from drop down list, then hit help, a manual should pop up, everything ou need including the testpoints is in there. Good luck