Lg p500 logo only??? - GSM-Forum

chamin · 11-21-2011, 13:34

hi supporters
i have LG P500 LG LOGO STUG PHONE
i did flash some versions .after flash still same problem.
how can i solve it
please help me

thanks

Octopus box · 11-21-2011, 13:42

Hello.
Please re-flash the phone with checked (selected) "Write boot loaders" option with the latest firmware from the support area.
If the error occurs during writing (AMSS or another part of firmware), YOU MANDATORY NEED to disconnect the cable, reconnect the battery, MANUALLY put phone into emergency mode (press and hold "Vol+" + "Back" + "Power"), connect the cable and repeat the procedure of firmware writing. It is very IMPORTANT to put the phone into Emergency mode MANUALLY!
Please don't use USB hubs and PCI USB cards. Also please uninstall all modem dashboard software, BB software and PC suites software.
Please use the latest software version!

chamin · 11-22-2011, 08:08

Quote:

Originally Posted by Octopus box

Hello.
Please re-flash the phone with checked (selected) "Write boot loaders" option with the latest firmware from the support area.
If the error occurs during writing (AMSS or another part of firmware), YOU MANDATORY NEED to disconnect the cable, reconnect the battery, MANUALLY put phone into emergency mode (press and hold "Vol+" + "Back" + "Power"), connect the cable and repeat the procedure of firmware writing. It is very IMPORTANT to put the phone into Emergency mode MANUALLY!
Please don't use USB hubs and PCI USB cards. Also please uninstall all modem dashboard software, BB software and PC suites software.
Please use the latest software version!

brother idid flash but still same problem

Welcome to Octopus Box LG Software version 1.9.9
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM25
Selected model: P500
Reading info...OK
Mode: Emergency
Model ID: BS/P500/7D
Opening "LGP500AT-00-V20c-EUR-XX-JUN-20-2011+0.oct"...OK
Checking partition...OK
Writing AMSS...OK
Writing APPS boot loader...OK
Writing Boot image...OK
Writing System...OK
Writing Recovery image...OK
Writing Splash image...OK
Finalizing...OK
Writing firmware done!
To finish the operation please power on phone and wait 3 minutes

how can i solve it please advice me brother

Octopus box · 11-22-2011, 08:16

Please make Unlock and then re-flash the phone again with checked (selected) "Write boot loaders" option. If this will not help - please check phone's hardware.

11-21-2011, 13:34	#1 (permalink)
chamin No Life Poster Join Date: Sep 2006 Location: in the office Age: 38 Posts: 609 Member: 352329 Status: Offline Thanks Meter: 38	Lg p500 logo only??? hi supporters i have LG P500 LG LOGO STUG PHONE i did flash some versions .after flash still same problem. how can i solve it please help me thanks

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
Phone Stuff for FREE & KEy-GEn For Logo Editor !	BoNtEk - ThA WtC MeMbA	Nokia Multimedia	8	10-31-2012 20:17
£20 only NOKIA 51xx/61xx sp locks 1,2,3,4 removed	spterminator	Main Sales Section	0	08-08-1999 05:08
i can unlock nokia 51xx/61xx sp locks 1,2,3,4 £40 each £30 bulk for u.k only	spterminator	Main Sales Section	0	08-01-1999 05:46
Operator-Logo for 5110	MiMiR the WiseMan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	06-25-1999 15:50

11-21-2011, 13:42	#2 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,877 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,418	Hello. Please re-flash the phone with checked (selected) "Write boot loaders" option with the latest firmware from the support area. If the error occurs during writing (AMSS or another part of firmware), YOU MANDATORY NEED to disconnect the cable, reconnect the battery, MANUALLY put phone into emergency mode (press and hold "Vol+" + "Back" + "Power"), connect the cable and repeat the procedure of firmware writing. It is very IMPORTANT to put the phone into Emergency mode MANUALLY! Please don't use USB hubs and PCI USB cards. Also please uninstall all modem dashboard software, BB software and PC suites software. Please use the latest software version!

11-22-2011, 08:16	#4 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,877 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,418	Please make Unlock and then re-flash the phone again with checked (selected) "Write boot loaders" option. If this will not help - please check phone's hardware.