LMQ730MM unlock done - GSM-Forum

usta arman · 10-20-2020, 12:45

Selected USB connection type
Work ID: 0000000000138333
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM44
Mode: Emergency
Initializing flash...OK
Model ID: LM-Q730MM
Platform: mt6765
Android version: 10
SW version: LMQ730MMAT-02-V10i-310-160-JUL-02-2020-ARB00+0
LAF Version: 1.1
Product ID: VS03S200602015629
IMEI: 354525-11-xxxxxx-7
Target operator: LAO
Hardware: rev_11
Battery level: 40%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354525-11-168201-7
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.

Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "Q730MM_354525111682017_20-10-2020_15-10-46.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: sbwtqh2
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 140 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Connection with server was lost!
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.5.06 Software version.

hussein1 · 11-01-2020, 22:41

Selected USB connection type
Work ID: 0000000000211700
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.Failed!
Could not detect mode.
Performed by 3.0.5.07 Software version.
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000211752
Checking data...OK
Platform: LG MTK
Selected port: COM9
Selected baudrate: 921600
Selected model: Q730MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM9
Mode: Emergency
Initializing flash...OK
Model ID: LM-Q730MM
Platform: mt6765
Android version: 10
SW version: LMQ730MMAT-02-V10l-310-160-SEP-08-2020-ARB00+0
LAF Version: 1.1
Product ID: VH01S200531003202
IMEI: 354525-11-121154-4
Target operator: LAO
Hardware: rev_11
Battery level: 73%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354525-11-12
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.

Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "Q730MM_354525111211_01-11-2020_16-32-25.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: h
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 320 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.5.07 Software version.

10-20-2020, 12:45	#1 (permalink)
usta arman Freak Poster Join Date: Aug 2012 Location: Armenia Yerevan Posts: 415 Member: 1801587 Status: Offline Thanks Meter: 230	LMQ730MM unlock done Selected USB connection type Work ID: 0000000000138333 Checking data...OK Platform: LG MTK Selected port: COM1 Selected baudrate: 921600 Selected model: Q730MM Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor) or Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable. Phone found at port COM44 Mode: Emergency Initializing flash...OK Model ID: LM-Q730MM Platform: mt6765 Android version: 10 SW version: LMQ730MMAT-02-V10i-310-160-JUL-02-2020-ARB00+0 LAF Version: 1.1 Product ID: VS03S200602015629 IMEI: 354525-11-xxxxxx-7 Target operator: LAO Hardware: rev_11 Battery level: 40% Reading partitions...OK LAF Error: 80000119. Checking security...OK -------------------------------------------------------------------------------- IMEI: 354525-11-168201-7 Bluetooth address: Unknown Wi-Fi MAC address: Unknown -------------------------------------------------------------------------------- Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk. Continue? Creating EEPROM backup...OK Initializing flash...OK Reading security area... Backup saved to "Q730MM_354525111682017_20-10-2020_15-10-46.EEP" Connecting to server...OK Octopus smart card is present. Checking smart card...OK Username: sbwtqh2 Authorizing...OK Checking balance...OK Checking operation...OK Sending device information...OK Get credits, needed for current operation...OK Your balance: 140 credits. To perform "Unlock" operation you need to have 100 credits. Unlocking...OK Reading partitions...OK Prepairing for change protect status... Initializing flash...OK Removing write protection...OK Initializing flash...OK Connection with server was lost! Reading partitions...OK Erasing part 1...OK Initializing flash...OK Erasing part 2...OK Initializing flash...OK Reading partitions...OK Prepairing for change protect status... Initializing flash...OK Restore write protection...OK Initializing flash...OK Reading partitions...OK Phone successfully unlocked! Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum! Performed by 3.0.5.06 Software version.

11-01-2020, 22:41	#2 (permalink)
hussein1 Freak Poster Join Date: Feb 2007 Location: usa Posts: 240 Member: 444048 Status: Online Thanks Meter: 52	lg q730mm unlock Selected USB connection type Work ID: 0000000000211700 Checking data...OK Platform: LG MTK Selected port: COM9 Selected baudrate: 921600 Selected model: Q730MM Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor) or Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.Failed! Could not detect mode. Performed by 3.0.5.07 Software version. -------------------------------------------------------------------------------- Selected USB connection type Work ID: 0000000000211752 Checking data...OK Platform: LG MTK Selected port: COM9 Selected baudrate: 921600 Selected model: Q730MM Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor) or Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable. Phone found at port COM9 Mode: Emergency Initializing flash...OK Model ID: LM-Q730MM Platform: mt6765 Android version: 10 SW version: LMQ730MMAT-02-V10l-310-160-SEP-08-2020-ARB00+0 LAF Version: 1.1 Product ID: VH01S200531003202 IMEI: 354525-11-121154-4 Target operator: LAO Hardware: rev_11 Battery level: 73% Reading partitions...OK LAF Error: 80000119. Checking security...OK -------------------------------------------------------------------------------- IMEI: 354525-11-12 Bluetooth address: Unknown Wi-Fi MAC address: Unknown -------------------------------------------------------------------------------- Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk. Continue? Creating EEPROM backup...OK Initializing flash...OK Reading security area... Backup saved to "Q730MM_354525111211_01-11-2020_16-32-25.EEP" Connecting to server...OK Octopus smart card is present. Checking smart card...OK Username: h Authorizing...OK Checking balance...OK Checking operation...OK Sending device information...OK Get credits, needed for current operation...OK Your balance: 320 credits. To perform "Unlock" operation you need to have 100 credits. Unlocking...OK Reading partitions...OK Prepairing for change protect status... Initializing flash...OK Removing write protection...OK Initializing flash...OK Reading partitions...OK Erasing part 1...OK Initializing flash...OK Erasing part 2...OK Initializing flash...OK Reading partitions...OK Prepairing for change protect status... Initializing flash...OK Restore write protection...OK Initializing flash...OK Reading partitions...OK Phone successfully unlocked! Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum! Performed by 3.0.5.07 Software version.