🐙 Octoplus/Octopus Box LG Software 2.9.1 is out! 🐙 - GSM-Forum

Gsmserver · 12-13-2018, 16:47

Octoplus/Octopus Box LG Software version 2.9.1 is out!
Added custom flashing and more!

Octoplus/Octopus Box LG Software v.2.9.1 Release Notes:

🐙 Released custom flashing possibility for MTK and Qualcomm CPU-based devices (supported "*.dz", "*.kdz", "*.oct" firmwares with LAF partition). From now on, you can select firmware file, select (mark) partitions that you want to write, and write only these selected partitions! Also, added possibility to skip formatting Userdata before flashing firmware.

The sequence of writing firmware:

Select firmware file.

Press "Write firmware" button.

Connect the device (put it into Download Mode) according to Software instructions (prompts).

In the appearing window select (mark) necessary partitions that you want to write, and press "Write" button.

Skip or allow formatting Userdata and continue the operation.

🐙 Added support for the following models:

- G710PM - added Write Firmware ("*.kdz", "*.oct"), Read/Write QCN, Read/Write NVM, Reset FRP (via TP) (thanks to Mr. ahmertelecom)
- LMX410EO - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410EOW - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410FC - added Read Codes (works for Android 7.x firmware only), Write Firmware (thanks to Mr. maxpatri9)
- LMX410FO - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410NCW - added Read Codes (works for Android 7.x firmware only), Write Firmware
- LMX410YCW - added Read Codes (works for Android 7.x firmware only), Write Firmware
- F750K - added Factory Reset (thanks to Mr. lerner_)

🐙 Improved "Unlock" operation for M153.

🐙 Improved "Write EEPROM" operation for MTK CPUs-based devices.

🐙 All supported operations are described in details in Software manual ("Cable & Manual" button in Software)

Download Octoplus/Octopus Box LG v.2.9.1

Find out more at: www.octoplusbox.com

mobile mk · 12-13-2018, 16:52

Plz add ak495 tablet for unlock

Hacker84 · 12-13-2018, 17:10

On this update, do you added FLASH LG M150, M153, M154?
Because we get error en gpt partition.....

Octopus box · 12-13-2018, 18:57

Quote:

Originally Posted by Hacker84

On this update, do you added FLASH LG M150, M153, M154?
Because we get error en gpt partition.....

What the error You get exactly? Create new thread and post there full Software log with all of performed operations, we will check.

ernestico911 · 12-13-2018, 19:20

Quote:

Originally Posted by Hacker84

On this update, do you added FLASH LG M150, M153, M154?
Because we get error en gpt partition.....

Remember sir, ATT, Cricket and Sprint/Boost Mobile host lg KDZ firmwares on their own servers, u cant flash TOT files on these devices

allumts · 12-13-2018, 16:55

No more words for @Octopus Team

Only can do Congratulation for this other Big Update

Quote:

🐙 Released custom flashing possibility for MTK and Qualcomm CPU-based devices (supported "*.dz", "*.kdz", "*.oct" firmwares with LAF partition). From now on, you can select firmware file, select (mark) partitions that you want to write, and write only these selected partitions! Also, added possibility to skip formatting Userdata before flashing firmware.

The Best LG Team in the Market.

BR
allumts

lyes_albert · 12-13-2018, 17:12

Custom flashing,
This feature will, for sure, perfectionate the tool..
Thanks so much

.

srst16275 · 12-13-2018, 17:20

Octoplus/Octopus Box team

very very big like

Thanks

lexisvz · 12-13-2018, 17:24

Please add unlock LG-G710PM Sprint!!!

luisy · 12-13-2018, 20:59

so, can I read older modem and carrier partitions from a phone and write to a newest one?
Will be great for Sprint Lg phones with new security for unlock...

Mr_F10ch3 · 12-13-2018, 22:31

Quote:

Originally Posted by luisy

so, can I read older modem and carrier partitions from a phone and write to a newest one?
Will be great for Sprint Lg phones with new security for unlock...

Im trying right now with ls777 trying to write modem and carrier extracted from ZV6 and get error flashing desired partitions also after that phone stuck in download mode

Code:

--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM115
Selected model: LS777
Reading info...
IMEI: 350305-26-XXXXX-4
Android version: 7.0
Battery level: 83%
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LS777ZV9_00
Android version: 7.0
LAF Version: 1.1
Product ID: BS01S170726000284
IMEI: 354234-08-518370-2
Target operator: SPR
Hardware: rev_10
Opening "LS777ZV6_03.tot"...OK
Firmware version: LS777ZV6
Firmware model: LG-LS777
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, 
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any 
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your 
computer during the flashing!
--------------------------------------------------------------------------------
Prepairing firmware...OK
Selecting firmware partitions...OK
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Writing 2/6 modem...Failed!
Performed by 2.9.1 Software version.

UPDATE: i was able to get out of download mode doing "screen lock reset with z3x"

Mr_F10ch3 · 12-13-2018, 23:04

Second try with ZV7 partitions but get same error

NOTE: im trying this at my own risk, long time i was waiting an update like this bu for my bad no work as i expected but any way is a GREAT UPDATE from Octoplus team.

Im gonna still trying with ls777, got many pieces with different versions from ZV9 to ZVF, already done many pieces via EMMC with medusa pro, this update give me some hope to avoid keep burning my eyes jejejejeje

yosbel182us · 12-13-2018, 22:02

For What is LAF Partition?? What happens if I flash an LG Rom without this partition? Who evades LAF?

RCACELLULAR · 12-14-2018, 03:43

what about LG- LMX410ASR ? pls. add tnx

kimanh_gsm · 12-14-2018, 06:14

Hi

LG SP200 flash ''SP20013b_to_X210ULMA10d_for_unlock'' OK, hang logo LG K8+

Quote:

Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...OK
Setting options...OK
Selecting firmware partitions...OK
Selected default partitions!
Reading partitions...OK
Do you want to format User Data?
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...OK
Writing lafbak...OK
Writing ftm...OK
Writing cache...OK
Writing OP...OK
Writing userdata...OK
Formating RCT...OK
Finalizing...OK
Performed by 2.9.1 Software version

Writing EEPROM bakup ok, still hang logo LG K8+

Quote:

Checking data...OK
Platform: LG MTK
Selected port: COM56
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM317
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version:
LAF Version: 1.1
Product ID:
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...Failed!
--------------------------------------------------------------------------------
IMEI:
MEID: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_3519800955xxxx_30-10-2018_17-59-38.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.
Performed by 2.9.1 Software version

Hard reset volume + and power still hang logo

12-13-2018, 16:47	#1 (permalink)
Gsmserver Product Supporter Join Date: Feb 2003 Location: gsmserver Posts: 9,185 Member: 21077 Status: Offline Thanks Meter: 116,440	🐙 Octoplus/Octopus Box LG Software 2.9.1 is out! 🐙 Octoplus/Octopus Box LG Software version 2.9.1 is out! Added custom flashing and more! Octoplus/Octopus Box LG Software v.2.9.1 Release Notes: 🐙 Released custom flashing possibility for MTK and Qualcomm CPU-based devices (supported ".dz", ".kdz", ".oct" firmwares with LAF partition). From now on, you can select firmware file, select (mark) partitions that you want to write, and write only these selected partitions! Also, added possibility to skip formatting Userdata before flashing firmware. The sequence of writing firmware:* Select firmware file. Press "Write firmware" button. Connect the device (put it into Download Mode) according to Software instructions (prompts). In the appearing window select (mark) necessary partitions that you want to write, and press "Write" button. Skip or allow formatting Userdata and continue the operation. 🐙 Added support for the following models: - G710PM - added Write Firmware (".kdz", ".oct"), Read/Write QCN, Read/Write NVM, Reset FRP (via TP) (thanks to Mr. ahmertelecom) - LMX410EO - added Read Codes (works for Android 7.x firmware only), Write Firmware - LMX410EOW - added Read Codes (works for Android 7.x firmware only), Write Firmware - LMX410FC - added Read Codes (works for Android 7.x firmware only), Write Firmware (thanks to Mr. maxpatri9) - LMX410FO - added Read Codes (works for Android 7.x firmware only), Write Firmware - LMX410NCW - added Read Codes (works for Android 7.x firmware only), Write Firmware - LMX410YCW - added Read Codes (works for Android 7.x firmware only), Write Firmware - F750K - added Factory Reset (thanks to Mr. lerner_) 🐙 Improved "Unlock" operation for M153. 🐙 Improved "Write EEPROM" operation for MTK CPUs-based devices. 🐙 All supported operations are described in details in Software manual ("Cable & Manual" button in Software) Download Octoplus/Octopus Box LG v.2.9.1 Find out more at: www.octoplusbox.com Last edited by Gsmserver; 12-13-2018 at 16:57.

12-13-2018, 16:52	#2 (permalink)
mobile mk Freak Poster Join Date: Dec 2012 Location: searching......... Age: 43 Posts: 343 Member: 1852490 Status: Offline Sonork: 100.1668568 Thanks Meter: 132	Plz add ak495 tablet for unlock

12-13-2018, 17:10	#3 (permalink)
Hacker84 Freak Poster Join Date: Jun 2008 Location: COLOMBIA Posts: 432 Member: 789804 Status: Offline Sonork: 100.1591611 Thanks Meter: 147	On this update, do you added FLASH LG M150, M153, M154? Because we get error en gpt partition.....

12-13-2018, 17:12	#7 (permalink)
lyes_albert Banned Join Date: Jan 2017 Location: Algeria DZ Posts: 1,666 Member: 2669781 Status: Offline Thanks Meter: 1,840	Custom flashing, This feature will, for sure, perfectionate the tool.. Thanks so much .

12-13-2018, 17:20	#8 (permalink)
srst16275 Freak Poster Join Date: May 2013 Posts: 162 Member: 1938072 Status: Offline Sonork: srst16275 Thanks Meter: 50	Octoplus/Octopus Box team very very big like Thanks

12-13-2018, 17:24	#9 (permalink)
lexisvz Insane Poster Join Date: Oct 2016 Posts: 65 Member: 2636022 Status: Offline Thanks Meter: 13	Please add unlock LG-G710PM Sprint!!!

12-13-2018, 20:59	#10 (permalink)
luisy Freak Poster Join Date: Feb 2015 Location: L&J_CUBA Posts: 348 Member: 2352896 Status: Offline Thanks Meter: 116	so, can I read older modem and carrier partitions from a phone and write to a newest one? Will be great for Sprint Lg phones with new security for unlock...

12-13-2018, 23:04	#12 (permalink)
Mr_F10ch3 No Life Poster Join Date: Mar 2007 Location: Dominican Republic Posts: 737 Member: 469532 Status: Offline Sonork: TG: CodebUnlocks Thanks Meter: 868	Second try with ZV7 partitions but get same error NOTE: im trying this at my own risk, long time i was waiting an update like this bu for my bad no work as i expected but any way is a GREAT UPDATE from Octoplus team. Im gonna still trying with ls777, got many pieces with different versions from ZV9 to ZVF, already done many pieces via EMMC with medusa pro, this update give me some hope to avoid keep burning my eyes jejejejeje

12-13-2018, 22:02	#13 (permalink)
yosbel182us No Life Poster Join Date: Jan 2014 Location: CUBA Age: 32 Posts: 546 Member: 2108610 Status: Offline Thanks Meter: 379	For What is LAF Partition?? What happens if I flash an LG Rom without this partition? Who evades LAF?

12-14-2018, 03:43	#14 (permalink)
RCACELLULAR Freak Poster Join Date: Apr 2008 Location: philippines Posts: 151 Member: 748067 Status: Offline Thanks Meter: 39	what about LG- LMX410ASR ? pls. add tnx