|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
05-11-2010, 11:44 | #316 (permalink) |
No Life Poster Join Date: May 2006 Location: Palermo
Posts: 714
Member: 281998 Status: Offline Thanks Meter: 117 | Platform: LG Analog Devices Selected port: COM4 Selected baudrate: 921600 Selected model: KP293 Please reconnect battery... Phone found. Sending loader...10/05/2010 17.10.03 > OK Reading info... Flash ID: 8988 Flash type: Intel IMEI: 353956-02-05xxxx-x Opening "KP293i-00-V10b-222-88-MAY-20-2008S.oct"... Writing Firmware... Will be written 2 zone(s) Writing Code data...10/05/2010 17.15.24 > OK Writing Alchemy data...10/05/2010 17.16.34 > OK Writing Firmware done! To finish the operation, please perform the following steps: - Click "Disconnect" and power ON the phone without SIM card - type in 2945#*# to enter eng. mode - select "Factory Reset" Disconnected. |
The Following 4 Users Say Thank You to s@lwos For This Useful Post: |
05-11-2010, 20:52 | #317 (permalink) |
No Life Poster Join Date: Dec 2006 Location: Jr Telecom™
Posts: 1,735
Member: 409725 Status: Offline Sonork: 100.1581478 Thanks Meter: 797 | KP500 unlock done by octopus! KP500 unlocked! ---------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM10 Selected baudrate: 921600 Selected model: KP500 Please reconnect battery, press and hold power button... Phone found. Release power button. Sending loader...OK Reading info. Please wait... IMEI: 358748-03-233509-5 Reading codes. Please wait... Unlock code: 8471 6076 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*71001# 2.Go to menu>Settings>Security>SIMLOCK and enter the code. Disconnected. -------------------------------------------- Direct unlock Platform: LG InfineonSelected port: COM10 Selected baudrate: 921600 Selected model: KP500 Please reconnect battery, press and hold power button... Phone found. Release power button. Sending loader...OK Reading info. Please wait... IMEI: 358748-03-233509-5 Unlocking... Reading security area... Backup saved to "KP500-358748032335095_12-05-2010_18-08-48.eep" Writing security area... Phone succesfully unlocked! Disconnected. |
The Following 4 Users Say Thank You to Jr Telecom For This Useful Post: |
05-11-2010, 21:16 | #318 (permalink) |
No Life Poster Join Date: May 2006 Location: The_Colombian_Team !
Posts: 802
Member: 278939 Status: Offline Sonork: 100.1593095 Thanks Meter: 382 | Ready Full Unlock LG GB280 Succesfully Here Imagen Best Regards .::: SaulCell :::. |
The Following 4 Users Say Thank You to Saulcell For This Useful Post: |
05-11-2010, 23:11 | #319 (permalink) |
No Life Poster Join Date: Oct 2009 Location: JAM Exploring Simlock 3!!! Age: 36
Posts: 947
Member: 1149815 Status: Offline Sonork: N/A for now Thanks Meter: 218 | Successfully unlock KP100 via Read Codes in just one Second thats briliant |
The Following 4 Users Say Thank You to GSM_STREET For This Useful Post: |
05-13-2010, 07:38 | #320 (permalink) |
Freak Poster Join Date: Dec 2008 Location: Manila Age: 14
Posts: 157
Member: 935830 Status: Offline Thanks Meter: 157 | Lg CE110 hang w/sim.. done by flashing in octopus and unlock PROCEDURE: *open octopus software version 1.2.6 *select model CE110 *octopus cable KE500 *click connect *select firmware (CE110P64FL-01-V10i-310-170 JAN 30 2008+1.oct) *and click write firmware *the final step click read codes and smile [CODE]Selected port: COM13 Selected baudrate: 921600 Selected model: CE110 Please reconnect battery, press and hold power button... Phone found. Sending loader...5/10/2010 6:36:52 PM > OK Release power button. Flash ID: AD36 Reading info. Please wait... IMEI: 011268-0 Opening "CE110P64FL-01-V10i-310-170 JAN 30 2008+1.oct"...5/10/2010 6:37:01 PM > OK Writing Firmware... Erasing entire flash...5/10/2010 6:37:10 PM > OK Writing xloader.raw...5/10/2010 6:37:10 PM > OK Erasing flash for "webdownloader.raw" ...5/10/2010 6:37:12 PM > OK Writing webdownloader.raw...5/10/2010 6:37:15 PM > OK Erasing flash for "CE110P64FL-01-V10i-310-170 JAN 30 2008.m32" ...5/10/2010 6:37:19 PM > OK Writing CE110P64FL-01-V10i-310-170 JAN 30 2008.m32...5/10/2010 6:42:24 PM > OK Erasing flash for "rtxt.raw" ...5/10/2010 6:42:25 PM > OK Writing rtxt.raw...5/10/2010 6:42:37 PM > OK Erasing flash for "rdat.raw" ...5/10/2010 6:42:38 PM > OK Writing rdat.raw...5/10/2010 6:42:39 PM > OK Erasing flash for "rotxt.raw" ...5/10/2010 6:42:40 PM > OK Writing rotxt.raw...5/10/2010 6:42:40 PM > OK Erasing flash for "rodatabss.raw" ...5/10/2010 6:42:41 PM > OK Writing rodatabss.raw...5/10/2010 6:42:41 PM > OK Erasing flash for "RFS_Meta.raw" ...5/10/2010 6:42:42 PM > OK Writing RFS_Meta.raw...5/10/2010 6:42:42 PM > OK Erasing flash for "RFS_Data.raw" ...5/10/2010 6:42:44 PM > OK Writing RFS_Data.raw...5/10/2010 6:43:18 PM > OK Writing Firmware...OK Finalizing... It takes 3-5 minutes. Please wait...5/10/2010 6:45:26 PM > OK Disconnected. ---------------------------------------------------------------------------------- Platform: LG Texas Instruments Selected port: COM13 Selected baudrate: 921600 Selected model: CE110 Please reconnect battery, press and hold power button... Phone found. Sending loader...5/10/2010 6:49:17 PM > OK Release power button. Flash ID: AD36 Reading info. Please wait... IMEI: 011268- Reading codes. Please wait... NCK Code: 5/10/2010 6:50:02 PM > 1317 6147 Disconnected./CODE] best regard, vino_89 |
The Following 4 Users Say Thank You to vino_89 For This Useful Post: |
05-13-2010, 08:54 | #321 (permalink) |
No Life Poster Join Date: Feb 2010 Location: Macedonia Age: 49
Posts: 1,741
Member: 1246981 Status: Offline Sonork: 100.1590424 Thanks Meter: 316 | kp500 succeseful unlocked by reading codes 5/13/2010 9:45:24 AM > Platform: LG Infineon 5/13/2010 9:45:24 AM > Selected port: COM13 5/13/2010 9:45:24 AM > Selected baudrate: 921600 5/13/2010 9:45:24 AM > Selected model: KP500 5/13/2010 9:45:25 AM > Please reconnect battery, press and hold power button... 5/13/2010 9:45:27 AM > Phone found. 5/13/2010 9:45:28 AM > Release power button. 5/13/2010 9:45:28 AM > Sending loader...5/13/2010 9:45:37 AM > OK 5/13/2010 9:45:38 AM > Reading info. Please wait... 5/13/2010 9:45:39 AM > IMEI: 359858-03-865463-6 5/13/2010 9:45:43 AM > Reading codes. Please wait... 5/13/2010 9:45:43 AM > ---------------------------------------------------------------------------------- 5/13/2010 9:45:43 AM > Unlock code: 5/13/2010 9:45:43 AM > 3093 9568 5/13/2010 9:45:43 AM > To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*71001# 2.Go to menu>Settings>Security>SIMLOCK and enter the code. 5/13/2010 9:50:22 AM > Disconnected. |
The Following 5 Users Say Thank You to trenac For This Useful Post: |
05-14-2010, 15:05 | #322 (permalink) |
No Life Poster Join Date: Mar 2008 Location: Romania Age: 44
Posts: 770
Member: 724928 Status: Offline Sonork: 100.1581257 Thanks Meter: 225 | Unlock U250 Code: 5/14/2010 2:09:51 PM > Welcome to Octopus box software version 1.2.6 5/14/2010 2:10:53 PM > ---------------------------------------------------------------------------------- 5/14/2010 2:10:53 PM > Platform: LG Qualcomm 5/14/2010 2:10:53 PM > Selected port: COM3 5/14/2010 2:10:53 PM > Selected model: U250 5/14/2010 2:10:55 PM > Phone not detected. Please try again. 5/14/2010 2:11:17 PM > ---------------------------------------------------------------------------------- 5/14/2010 2:11:17 PM > Platform: LG Qualcomm 5/14/2010 2:11:17 PM > Selected port: COM5 5/14/2010 2:11:17 PM > Selected model: U250 5/14/2010 2:11:17 PM > Mode: Normal 5/14/2010 2:11:17 PM > Phone model: U250 5/14/2010 2:11:17 PM > SW Version: U250-MSM6245-V10a-MAY-19-2007-XX 5/14/2010 2:11:17 PM > IMEI: 356385-01-120392-9 5/14/2010 2:11:17 PM > Bluetooth adress: 00:1C:62:1D:30:96 5/14/2010 2:11:17 PM > Firmware compiled date: May 19 2007 5/14/2010 2:11:17 PM > Firmware compiled time: 14:00:00 5/14/2010 2:11:17 PM > Firmware released date: May 19 2007 5/14/2010 2:11:17 PM > Firmware released time: 02:54:59 5/14/2010 2:11:21 PM > ---------------------------------------------------------------------------------- 5/14/2010 2:11:21 PM > Platform: LG Qualcomm 5/14/2010 2:11:21 PM > Selected port: COM5 5/14/2010 2:11:21 PM > Selected model: U250 5/14/2010 2:11:21 PM > Mode: Normal 5/14/2010 2:11:21 PM > Phone model: U250 5/14/2010 2:11:21 PM > SW Version: U250-MSM6245-V10a-MAY-19-2007-XX 5/14/2010 2:11:21 PM > IMEI: 356385-01-120392-9 5/14/2010 2:11:21 PM > Bluetooth adress: 00:1C:62:1D:30:96 5/14/2010 2:11:25 PM > Reading NVM... 5/14/2010 2:11:28 PM > Reading NVM done! 5/14/2010 2:11:41 PM > ---------------------------------------------------------------------------------- 5/14/2010 2:11:41 PM > Platform: LG Qualcomm 5/14/2010 2:11:41 PM > Selected port: COM5 5/14/2010 2:11:41 PM > Selected model: U250 5/14/2010 2:11:41 PM > Mode: Normal 5/14/2010 2:11:41 PM > Phone model: U250 5/14/2010 2:11:41 PM > SW Version: U250-MSM6245-V10a-MAY-19-2007-XX 5/14/2010 2:11:41 PM > IMEI: 356385-01-120392-9 5/14/2010 2:11:41 PM > Bluetooth adress: 00:1C:62:1D:30:96 5/14/2010 2:11:42 PM > Unlocking... 5/14/2010 2:11:42 PM > Prepairing loader...5/14/2010 2:11:45 PM > OK 5/14/2010 2:11:45 PM > Sending loader...5/14/2010 2:11:46 PM > OK 5/14/2010 2:11:46 PM > Reading security area... 5/14/2010 2:11:46 PM > Backup saved to "U250-356385011203929_14-05-2010_14-11-46.sec" 5/14/2010 2:11:46 PM > Erasing security area...5/14/2010 2:11:46 PM > OK 5/14/2010 2:11:46 PM > Writing security area...5/14/2010 2:11:46 PM > OK 5/14/2010 2:11:46 PM > Phone successfully unlocked! 5/14/2010 2:11:46 PM > Rebooting phone... Code: 5/14/2010 3:37:54 PM > Welcome to Octopus box software version 1.2.6 5/14/2010 3:42:14 PM > ---------------------------------------------------------------------------------- 5/14/2010 3:42:14 PM > Platform: LG SEMC 5/14/2010 3:42:14 PM > Selected port: COM3 5/14/2010 3:42:14 PM > Selected baudrate: 921600 5/14/2010 3:42:14 PM > Selected model: GT505 5/14/2010 3:42:15 PM > Use Testpoint/Jumper: No 5/14/2010 3:42:15 PM > ---------------------------------------------------------------------------------- 5/14/2010 3:42:15 PM > For correct working the battery must be fully charged! 5/14/2010 3:42:15 PM > Please, reconnect battery, press and hold volume-up button and connect USB cable. 5/14/2010 3:42:15 PM > If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). 5/14/2010 3:42:15 PM > Starting... 5/14/2010 3:42:18 PM > Disconnected. 5/14/2010 3:48:49 PM > ---------------------------------------------------------------------------------- 5/14/2010 3:48:49 PM > Platform: LG SEMC 5/14/2010 3:48:49 PM > Selected port: COM3 5/14/2010 3:48:49 PM > Selected baudrate: 921600 5/14/2010 3:48:49 PM > Selected model: GT505 5/14/2010 3:48:49 PM > Use Testpoint/Jumper: No 5/14/2010 3:48:49 PM > ---------------------------------------------------------------------------------- 5/14/2010 3:48:49 PM > For correct working the battery must be fully charged! 5/14/2010 3:48:49 PM > Please, reconnect battery, press and hold volume-up button and connect USB cable. 5/14/2010 3:48:49 PM > If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). 5/14/2010 3:48:49 PM > Starting...5/14/2010 3:48:57 PM > OK 5/14/2010 3:48:57 PM > Phone found 5/14/2010 3:48:57 PM > Chip ID: 0xD9000401FFFFFFFF 5/14/2010 3:48:57 PM > Chipset: DB3200 5/14/2010 3:48:57 PM > Detecting connection...5/14/2010 3:48:57 PM > OK 5/14/2010 3:48:57 PM > BootROM mode detected 5/14/2010 3:48:57 PM > Sending ACC preloader...5/14/2010 3:48:58 PM > OK 5/14/2010 3:48:58 PM > Sending APP preloader...5/14/2010 3:48:58 PM > OK 5/14/2010 3:48:58 PM > Phone CID: 54 5/14/2010 3:48:58 PM > IMEI: 354695-03-491242-7 5/14/2010 3:48:58 PM > Phone color: UNKNOWN 5/14/2010 3:48:58 PM > OTP LOCKED: 1 5/14/2010 3:48:58 PM > Sending ACC production loader...5/14/2010 3:48:59 PM > OK 5/14/2010 3:48:59 PM > Sending APP production loader...5/14/2010 3:49:01 PM > OK 5/14/2010 3:49:01 PM > Reading GDFS... 5/14/2010 3:49:04 PM > Reading GDFS zone...5/14/2010 3:49:06 PM > OK 5/14/2010 3:49:06 PM > GDFS zone size: 4125 bytes 5/14/2010 3:49:06 PM > GDFS blocks count: 215 5/14/2010 3:49:06 PM > Reading TA zone...5/14/2010 3:49:17 PM > OK 5/14/2010 3:49:17 PM > TA zone size: 158938 bytes 5/14/2010 3:49:17 PM > TA blocks count: 1063 5/14/2010 3:49:17 PM > Reading GDFS done! 5/14/2010 3:49:17 PM > Disconnected. 5/14/2010 3:49:24 PM > ---------------------------------------------------------------------------------- 5/14/2010 3:49:24 PM > Platform: LG SEMC 5/14/2010 3:49:24 PM > Selected port: COM3 5/14/2010 3:49:24 PM > Selected baudrate: 921600 5/14/2010 3:49:24 PM > Selected model: GT505 5/14/2010 3:49:24 PM > Use Testpoint/Jumper: No 5/14/2010 3:49:24 PM > ---------------------------------------------------------------------------------- 5/14/2010 3:49:24 PM > For correct working the battery must be fully charged! 5/14/2010 3:49:24 PM > Please, reconnect battery, press and hold volume-up button and connect USB cable. 5/14/2010 3:49:24 PM > If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). 5/14/2010 3:49:24 PM > Starting...5/14/2010 3:49:31 PM > OK 5/14/2010 3:49:31 PM > Phone found 5/14/2010 3:49:31 PM > Chip ID: 0xD9000401FFFFFFFF 5/14/2010 3:49:31 PM > Chipset: DB3200 5/14/2010 3:49:31 PM > Detecting connection...5/14/2010 3:49:31 PM > OK 5/14/2010 3:49:31 PM > BootROM mode detected 5/14/2010 3:49:31 PM > Sending ACC preloader...5/14/2010 3:49:31 PM > OK 5/14/2010 3:49:31 PM > Sending APP preloader...5/14/2010 3:49:32 PM > OK 5/14/2010 3:49:32 PM > Phone CID: 54 5/14/2010 3:49:32 PM > IMEI: 354695-03-491242-7 5/14/2010 3:49:32 PM > Phone color: UNKNOWN 5/14/2010 3:49:32 PM > OTP LOCKED: 1 5/14/2010 3:49:32 PM > Sending ACC production loader...5/14/2010 3:49:33 PM > OK 5/14/2010 3:49:33 PM > Sending APP production loader...5/14/2010 3:49:35 PM > OK 5/14/2010 3:49:35 PM > Unlocking...5/14/2010 3:49:37 PM > OK 5/14/2010 3:49:37 PM > All codes are set to: 5/14/2010 3:49:37 PM > 96754312 5/14/2010 3:49:37 PM > To finish the operation, please re-flash phone with any firmware from the support area! 5/14/2010 3:49:37 PM > Disconnected. Code: 5/14/2010 4:04:12 PM > Welcome to Octopus box software version 1.2.6 5/14/2010 4:04:55 PM > ---------------------------------------------------------------------------------- 5/14/2010 4:04:55 PM > Platform: LG SEMC 5/14/2010 4:04:55 PM > Selected port: COM3 5/14/2010 4:04:55 PM > Selected baudrate: 921600 5/14/2010 4:04:55 PM > Selected model: GT505 5/14/2010 4:04:55 PM > Use Testpoint/Jumper: No 5/14/2010 4:04:55 PM > ---------------------------------------------------------------------------------- 5/14/2010 4:04:56 PM > For correct working the battery must be fully charged! 5/14/2010 4:04:56 PM > Please, reconnect battery, press and hold volume-up button and connect USB cable. 5/14/2010 4:04:56 PM > If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). 5/14/2010 4:04:56 PM > Starting...5/14/2010 4:05:13 PM > OK 5/14/2010 4:05:13 PM > Phone found 5/14/2010 4:05:13 PM > Chip ID: 0xD9000401FFFFFFFF 5/14/2010 4:05:13 PM > Chipset: DB3200 5/14/2010 4:05:13 PM > Detecting connection...5/14/2010 4:05:13 PM > OK 5/14/2010 4:05:13 PM > BootROM mode detected 5/14/2010 4:05:13 PM > Sending ACC preloader...5/14/2010 4:05:13 PM > OK 5/14/2010 4:05:13 PM > Sending APP preloader...5/14/2010 4:05:14 PM > OK 5/14/2010 4:05:14 PM > Phone CID: 54 5/14/2010 4:05:14 PM > IMEI: 354695-03-491242-7 5/14/2010 4:05:14 PM > Phone color: UNKNOWN 5/14/2010 4:05:14 PM > OTP LOCKED: 1 5/14/2010 4:05:14 PM > Sending ACC production loader...5/14/2010 4:05:15 PM > OK 5/14/2010 4:05:15 PM > Sending APP production loader...5/14/2010 4:05:17 PM > OK 5/14/2010 4:05:17 PM > Opening "BIN-GT505AT-00-V10e-EUR-XXX-OCT-15-2009+0.oct"...5/14/2010 4:05:17 PM > OK 5/14/2010 4:05:17 PM > Writing Firmware... 5/14/2010 4:05:17 PM > Writing "cxc000000_APPLICATION_PHONE_SB_IAR-ARM-NAND.ssw"...5/14/2010 4:07:39 PM > OK 5/14/2010 4:07:39 PM > Writing "CXC_FS_CABS_LP_NAND_commercial.ssw"...5/14/2010 4:13:12 PM > OK 5/14/2010 4:13:12 PM > Writing "CXC_LGPXO_SYS_CABS_LP_NAND_commercial.ssw"...5/14/2010 4:14:25 PM > OK 5/14/2010 4:14:29 PM > Disconnected. |
The Following 2 Users Say Thank You to radar1 For This Useful Post: |
05-15-2010, 04:08 | #323 (permalink) |
No Life Poster Join Date: Oct 2004 Location: Dominica, West Indies Age: 63
Posts: 646
Member: 88701 Status: Offline Thanks Meter: 381 | Kp500 flash done Hi... Had to Flash KP500 (stuck forever on LG Logo) Done sucessfully with Octopus ..via KE500 RJ 45 Thanks Octopus Team :smokin |
The Following 5 Users Say Thank You to Orange_Dominica For This Useful Post: |
05-15-2010, 14:21 | #324 (permalink) |
No Life Poster Join Date: Oct 2009 Location: JAM Exploring Simlock 3!!! Age: 36
Posts: 947
Member: 1149815 Status: Offline Sonork: N/A for now Thanks Meter: 218 | CU920 Successfully DONE!!! Welcome to Octopus box software version 1.2.7 ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM24 Selected model: CU920 Mode: Normal Phone model: CU920 SW Version: CU920-MSM4090201D-V10p-SEP-26-2008-ATT-US IMEI: 0113XX-00-XXXXXX-6 Bluetooth adress: 00:21:FB:1D:32:BC Reading NVM... Reading NVM done! ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM24 Selected model: CU920 Mode: Normal Phone model: CU920 SW Version: CU920-MSM4090201D-V10p-SEP-26-2008-ATT-US IMEI: 011333-00-587541-6 Bluetooth adress: 00:21:FB:1D:32:BC Firmware compiled date: Jul 31 2008 Firmware compiled time: 11:00:00 Firmware released date: Sep 26 2008 Firmware released time: 09:12:01 ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM24 Selected model: CU920 Mode: Normal Phone model: CU920 SW Version: CU920-MSM4090201D-V10p-SEP-26-2008-ATT-US IMEI: 0113XX-00-XXXXXX-6 Bluetooth adress: 00:21:FB:1D:32:BC Unlocking... Prepairing loader...OK Sending loader...OK Reading security area... Backup saved to "CU920-0113XX00XXXXXX6_14-05-2010_20-34- 46.sec" Erasing security area...OK Writing security area...OK Phone successfully unlocked! Rebooting phone... |
The Following 7 Users Say Thank You to GSM_STREET For This Useful Post: |
05-16-2010, 11:48 | #325 (permalink) |
No Life Poster Join Date: Aug 2009 Location: Ph country
Posts: 1,266
Member: 1104730 Status: Offline Thanks Meter: 446 | Phone model: KW120611 Welcome to Octopus box software version 1.2.9 ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM14 Selected model: KH1200 Mode: Normal Phone model: KW120611 SW Version: KH1200-M6250D-V10h-APR-26-2007-KKR IMEI: 354207-01-116731-2 Bluetooth adress: 00:12:56:9AD:09 Firmware compiled date: Aug 14 2006 Firmware compiled time: 11:00:00 Firmware released date: Apr 25 2007 Firmware released time: 18:00:49 User lock code: 4468 ---------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM14 Selected model: KH1200 Mode: Normal Phone model: KW120611 SW Version: KH1200-M6250D-V10h-APR-26-2007-KKR IMEI: 354207-01-116731-2 Bluetooth adress: 00:12:56:9AD:09 Sending loader...OK Switching to test mode... Wait phone startup...OK Searching signatures... Signature #1...OK, not patched Patching... Signature #1...OK Phone successfully unlocked! Rebooting phone... |
The Following 7 Users Say Thank You to Babyunlocker For This Useful Post: |
05-17-2010, 18:53 | #326 (permalink) |
No Life Poster Join Date: Apr 2008 Location: Where Dreams Comes True...S4U
Posts: 5,362
Member: 755709 Status: Offline Sonork: 100.1592000 Momo... Thanks Meter: 6,635 | unlock ku 990i ---------------------------------------------------------------------------------- Selected port: COM34 Selected model: KU990i Mode: Normal Phone model: KU990i SW Version: KU990i-MSM6280-V10d-MAR-20-2009-XX IMEI: 357121-03-901445-4 Bluetooth adress: 00:26:E2:4E:95:FA Unlocking... Sending preloader...OK Please wait... Don't disconnect phone! Wait phone startup...OK Prepairing loader...OK Sending loader...OK Reading security area... Backup saved to "KU990I-357121039014454_17-05-2010_17-50- 39.sec" Erasing security area...OK Writing security area...OK Phone successfully unlocked! Rebooting phone... |
The Following 13 Users Say Thank You to Momo_Gsm For This Useful Post: |
05-17-2010, 19:44 | #327 (permalink) |
No Life Poster Join Date: Apr 2008 Location: Where Dreams Comes True...S4U
Posts: 5,362
Member: 755709 Status: Offline Sonork: 100.1592000 Momo... Thanks Meter: 6,635 | unlock lg gb 102: Welcome to Octopus box software version 1.2.7 ---------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM6 Selected baudrate: 921600 Selected model: GB102 Please reconnect battery... Phone found. Sending preloader...OK Sending loader...OK Reading info. Please wait... Flash ID: 01001A01 Flash type: AMD IMEI: 359164-03-398468-4 Reading codes. Please wait... ---------------------------------------------------------------------------------- Unlock code: 3354 1854 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*20001# 2.Go to menu>Settings>Security>SIMLOCK and enter the code. thanks octopus box. br ---s@nsari--- |
The Following 14 Users Say Thank You to Momo_Gsm For This Useful Post: |
05-18-2010, 05:20 | #328 (permalink) |
Freak Poster Join Date: Sep 2006
Posts: 221
Member: 353717 Status: Offline Sonork: 1001647526 Thanks Meter: 147 | unlock LG GB125 by read codes Welcome to Octopus box software version 1.2.7 ---------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM9 Selected baudrate: 921600 Selected model: GB125 Please reconnect battery... Phone found. Sending preloader...OK Sending loader...OK Reading info. Please wait... Flash ID: 7F00F622 Flash type: SILICON7 IMEI: 352382-03-145221-8 Reading codes. Please wait... ---------------------------------------------------------------------------------- Unlock code: 3347 6589 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*20001# 2.Go to menu>Settings>Security>SIMLOCK and enter the code. |
The Following 5 Users Say Thank You to sonhuong_dt For This Useful Post: |
05-18-2010, 08:42 | #329 (permalink) |
Cheater -Don't Deal with him- Join Date: Feb 2007 Location: Palestine
Posts: 2,068
Member: 452256 Status: Offline Sonork: 100.1651051 Thanks Meter: 587 | ce110 unlock done Code: Platform: LG Texas Instruments Selected port: COM12 Selected baudrate: 115200 Selected model: CE110 Please reconnect battery, press and hold power button... Phone found. Sending loader...OK Release power button. Flash ID: AD36 Reading info. Please wait... IMEI: 011268-00-180634-8 Reading codes. Please wait... NCK Code: 8210 2257 Disconnected. |
The Following 5 Users Say Thank You to .::Naseer Al-islam::. For This Useful Post: |
05-18-2010, 19:44 | #330 (permalink) |
No Life Poster Join Date: Apr 2008 Location: Where Dreams Comes True...S4U
Posts: 5,362
Member: 755709 Status: Offline Sonork: 100.1592000 Momo... Thanks Meter: 6,635 | LG kp100: Welcome to Octopus box software version 1.2.8 ---------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM6 Selected baudrate: 921600 Selected model: KP100 Please reconnect battery... Phone found. Sending preloader...OK Sending loader...OK Reading info. Please wait... Flash ID: 01001A01 Flash type: AMD IMEI: 358479-02-554676-7 Reading codes. Please wait... ---------------------------------------------------------------------------------- Unlock code: 2343 8281 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*20001# 2.Go to menu>Settings>Security>SIMLOCK and enter the code. Unlocking... Reading security area... Backup saved to "KP100-358479025546767_18-05-2010_18-39-04.eep" Writing security area... Phone successfully unlocked! ---------------------------------------------------------------------------------- To finish the operation, please perform the following steps: 1. Click "Disconnect" 2. Power ON the phone (Please hold the power button for 30 sec) 3. Restore the original IMEI using the "IMEI fix" option. |
The Following 14 Users Say Thank You to Momo_Gsm For This Useful Post: |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Post here successfully unlocked a2 phones | 3lsheikh | SETool2 | 10 | 03-04-2011 02:48 |
Successfully Unlock Z240 Phone Freeze | jhepoy_org | UST Pro II | 13 | 12-02-2009 06:03 |
Successfully unlock BB5 phones with bb5king | Mjabbar | BB5KING | 0 | 11-29-2008 14:13 |
Successfully unlock BB5 phones with bb5king | Mjabbar | BB5KING | 2 | 11-26-2008 11:54 |
PB2 - Successfully unlocked LG phones CU/KU ... | DOUHAL | PolarBox 3 | 72 | 11-05-2008 18:21 |
|