hot new solution Huawei C2800 C2808 C2906 C5588 and C3308 unlock codes - GSM-Forum

tarun0000 · 03-24-2010, 16:03

Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock.
This is to restore factory, password recovery and 000000.

mohit_kripalu01 · 03-24-2010, 16:26

Quote:

Originally Posted by tarun0000

Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock.
This is to restore factory, password recovery and 000000.

i am totaly confuse ................?

ranagaurav · 03-24-2010, 16:29

Quote:

i am totaly confuse ................?

ya i m also this is very?????????????

saurabhmobile · 03-24-2010, 16:42

Quote:

Originally Posted by tarun0000

Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock.
This is to restore factory, password recovery and 000000.

tarun bhai what is this?

royal_electronics · 03-24-2010, 16:48

Quote:

Originally Posted by tarun0000

Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock.
This is to restore factory, password recovery and 000000.

brother plz explain how.its confused way.....??????

chandan_123 · 03-24-2010, 17:07

It is true.any budy test it solution..................

***MyGSM World*** · 03-24-2010, 17:28

Quote:

Originally Posted by tarun0000

Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock.
This is to restore factory, password recovery and 000000.

I Am Totaly Confused, Please Full Solution Step By Step

mohit_kripalu01 · 03-24-2010, 17:28

Quote:

Originally Posted by chandan_123

It is true.any budy test it solution..................

what you mean this is true or any buddy test this solution

why you say this is true without test

kaushik2aki · 03-24-2010, 17:56

this is chines solution not for indian br

Hariom123 · 03-24-2010, 18:05

use universal utility software
reset user code & phone locked service center ok

http://forum.gsmhosting.com/vbb/f128...-9-6-a-672251/

Hariom

compue · 03-24-2010, 18:45

Quote:

Originally Posted by Hariom123

use universal utility software
reset user code & phone locked service center ok

http://forum.gsmhosting.com/vbb/f128...-9-6-a-672251/

Hariom

whatever tarun0000 this guy tell hariom expalin in one line, plz do not give so complicated results, solutions that every body confused, yet solution is for reset password and contact service provider. the best answer is universal utility.

amit kanpur · 03-24-2010, 21:44

it"s a only restore code not in unlocking code

osakun · 03-25-2010, 00:34

100% confused way to make evrybody more confused

yadav1961 · 03-25-2010, 03:12

100% confused way to make evrybody more confused yes sir

umadineshdas · 03-25-2010, 05:19

Quote:

Originally Posted by tarun0000

Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock.
This is to restore factory, password recovery and 000000.

what is this bro..............
i think you had to practice paragraph in mobile story...........
If it is any unlock solution then please write it to step by steps.....

03-24-2010, 16:03	#1 (permalink)
tarun0000 Insane Poster Join Date: Nov 2004 Age: 40 Posts: 95 Member: 91087 Status: Offline Thanks Meter: 54	hot new solution Huawei C2800 C2808 C2906 C5588 and C3308 unlock codes Be sure to "card" (UIM, SIM, PHS cards), and screen out "enter phone password" on the screen-left foot "SOS", enter "# # 497613" + "key" to launch post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Enter FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after re-starting. to normal screen, in the middle of the screen Mode" FTM "flag, this is not an unlock success, is to go to the test status cannot be used. This is the input "# # 258741" + "emission" key, the screen out "Restore?" Selected screen-left foot "OK" screen out "PHONE REST" one second after the shutdown, then do not power off, wait 5 minutes, the machine automatically restart, recover to normal screen, in the middle of the screen Mode "FTM" signs still in beta state and cannot be used. Exit the test status to enter "# # 497613" + "emission" key into the post status, select RF test "by screen-left foot" Select "OK, and then select the last entry in the" Quit from FTM mode "on the screen in the lower left leg of the" Select "OK, screen out" Pone rest "one second after restart. You will find the lock. This is to restore factory, password recovery and 000000.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hot !!! BB5 Rpls And All unlock Codes	Javajohn	Main Sales Section	0	04-09-2009 11:58
HOT NEW SERVICE - www.UnlockCodes.ie - The Easy Way to Unlock Your Phone!	GSM Solutions Ireland	Main Sales Section	0	06-13-2008 17:54
Looking for Blackberry Pearl Unlock Codes and Motorola Unlock codes	Jokez guy	Wanted Products	1	06-15-2007 09:36
Nokia 3410 and 3590 unlock codes	Imral	Phone Unlocking Codes & Maps	2	12-24-2003 17:52
Thoose c350 and v66i unlock code possible ?	gilsie	Phone Unlocking Codes & Maps	0	08-12-2003 19:54

03-24-2010, 17:07	#6 (permalink)
chandan_123 No Life Poster Join Date: Jun 2008 Location: india Posts: 2,541 Member: 801212 Status: Offline Sonork: 100.1657902 Thanks Meter: 773	It is true.any budy test it solution..................

03-24-2010, 17:56	#9 (permalink)
kaushik2aki Freak Poster Join Date: Jul 2006 Posts: 361 Member: 318393 Status: Offline Sonork: 100.1578597 Thanks Meter: 117	this is chines solution not for indian br

03-24-2010, 18:05	#10 (permalink)
Hariom123 Registered User Join Date: Jul 2008 Location: (India) Age: 41 Posts: 749 Member: 804452 Status: Offline Thanks Meter: 249	use universal utility software reset user code & phone locked service center ok http://forum.gsmhosting.com/vbb/f128...-9-6-a-672251/ Hariom

03-24-2010, 21:44	#12 (permalink)
amit kanpur No Life Poster Join Date: May 2009 Location: kanpur Age: 35 Posts: 2,443 Member: 1033905 Status: Offline Sonork: amitsharma Thanks Meter: 892	it"s a only restore code not in unlocking code

03-25-2010, 00:34	#13 (permalink)
osakun Freak Poster Join Date: May 2007 Location: BALI....Last heaven on earth Posts: 180 Member: 517096 Status: Offline Thanks Meter: 25	100% confused way to make evrybody more confused

03-25-2010, 03:12	#14 (permalink)
yadav1961 Insane Poster Join Date: Jan 2008 Posts: 63 Member: 687790 Status: Offline Thanks Meter: 10	100% confused way to make evrybody more confused yes sir