Iphone 5+RSIM8 Gold+German Cards = Not working

[eko700]

Hi Guys,

i bought an RSIM8 Gold for bypass the lock of my iphone5. I made all as you described on your sites, but allways i have these problems after entering the IMSI and after the restart:

with the Vodafone Germany Prepaid NANO-SIM:

* Long time "Searching", than no Service, after 10 Minutes Vodafone
* Sometimes Calling works in both directions
* Sometimes i can make, but not receive calls
* Loss of Signal, after a lot of restarts it comes again
* No Internet Service (2G, 3G)
* No Internet Options (Like 3G or LTE) in Menu
* No Phone Options in Menu like: Call Divert. e.g.

with the T-Mobile Postpaid NANO-SIM it worser:

* Long time "Searching", than no Service, after 2-3 Signal, but getting away
* No Calls possible
* Loss of Signal, after a lot of restarts didn´t come again....after 3 days now
* No Internet Service (2G, 3G)
* No Internet Options (Like 3G or LTE) in Menu
* No Phone Options in Menu like: Call Divert. e.g.

In both cases i tried a full restart, i installed on one (of my both) RSIM8 cards the 3G Patch from your site...but no effect. Same problems: Sometimes Carrier Signal, Problems with receiving calls and no 2G or 3G Internet (I tried all APN-Solution)

Do i make a mistake, have you an idea or is it possible that your service is not optimized to German Carriers ? Would the RSIM+ work ?

[miliky]

We have addressed those issues with Original new (unboxed) nano simcards that you do not have to cut with R-SIM8+.

From what you have written I guess this is the case.. It is not much about iPhone or the Carrier but issues with new 128k nano simcards..

Issues with those cards with new security is not just about us but general and confirmed that iR0setool fixes it.. you can search the web for iR0setool and see why we injected it with the FREE PATCH and why it is working to fix the bug with 128k nano simcards.

Remaining one setback with 3G that will be addressed with paid PATCH that will be released for iOS7 final..

[eko700]

At first: Many thanks for giving me an answer. So if i understand you right, i have to use a patch ? As i understand, the activation patch is only for sprint & co ??

But which one ? Can you give me the link ?

Thx

[eko700]

Hi Milky,

Update: i have installed the patch.

R-SIM 4G/3G128K USIM Nano patch Installation Instructions R-SIM iPhone 5 and 4S GSM/CDMA Unlocking and Activation ,GEVEY UNLOCK,GPP UNLOCK

Internet is working, at this moment with 2G. Sometimes i get an "E" or an "o". Can make and receive Calls. If this stays so, i will say: SUCCESSFULL !

Hope & wait for IOS7 and a 3G Patch...this will be great. Best regards

[ntegrob]

Hi, Purchased the Rsim8+ for the iphone 5, sprint locked. I was able to activate the phone outside US using my sprint sim card. However after installing the Rsim8+, putting in the new carrier code, restarting phone and then installing the patch above, the phone searched for the network for sometime and then went to the "activation required" screen.

I have tried resetting phone and going through same process, even not installing the patch, but it keeps going back to the "activation required" screen after a few seconds. What am I doing wrong. Pleeeaase help!

[ntegrob]

I had a similar problem.. u need to use the code of the carrier to which the phone is locked, which in yr case case is sprint. It should b among the default carriers so just select it.. Unfortunately since u had already input the new carrier settings, u will need to first completely reset the phone, reactivate, insert r sim and select sprint..After restart it may take up to 10 mins before signal is obtained . Enjoy

[LuizinhoMN]

Originally Posted by ntegrob

Hi, Purchased the Rsim8+ for the iphone 5, sprint locked. I was able to activate the phone outside US using my sprint sim card. However after installing the Rsim8+, putting in the new carrier code, restarting phone and then installing the patch above, the phone searched for the network for sometime and then went to the "activation required" screen.

I have tried resetting phone and going through same process, even not installing the patch, but it keeps going back to the "activation required" screen after a few seconds. What am I doing wrong. Pleeeaase help!

Try other SIM card, and then go back to your card.

[ntegrob]

R u on ios7.. Please let me know if 2g/3g works.. i've tried installing all sorts of patches but nothing works, even the paid for one

[LuizinhoMN]

In my case, iPhone 5 CDMA Sprint, 2G/3G/SMS not working. Waiting the Patch for iOS 7.0.3...

[ntegrob]

Hi guys, any update on the 2g/3g/sms patch for IOS 7.0.2 (sprint Iphone 5)??

[abaa]

Originally Posted by miliky

We have addressed those issues with Original new (unboxed) nano simcards that you do not have to cut with R-SIM8+.

From what you have written I guess this is the case.. It is not much about iPhone or the Carrier but issues with new 128k nano simcards..

Issues with those cards with new security is not just about us but general and confirmed that iR0setool fixes it.. you can search the web for iR0setool and see why we injected it with the FREE PATCH and why it is working to fix the bug with 128k nano simcards.

Remaining one setback with 3G that will be addressed with paid PATCH that will be released for iOS7 final..

what abt bypassing activation screen with r-sim8?is it possible? after reading all abt r-sim8+ on the website,i ordered 50 pcs of r-sim8+ from a reseller.but it seems almost impossible to bypass the the activation screen(not even on ios 6).is there a way out? or i should just throw them in the garbage ?

[abaa]

Originally Posted by ntegrob

Hi, Purchased the Rsim8+ for the iphone 5, sprint locked. I was able to activate the phone outside US using my sprint sim card. However after installing the Rsim8+, putting in the new carrier code, restarting phone and then installing the patch above, the phone searched for the network for sometime and then went to the "activation required" screen.

I have tried resetting phone and going through same process, even not installing the patch, but it keeps going back to the "activation required" screen after a few seconds. What am I doing wrong. Pleeeaase help!

have u been able to bypass the activation screen?if yes,can u guide us?