Post Here successful reports with Avengers Box - Page 92 - GSM-Forum

hunnyck · 10-06-2020, 10:06

huawei Y520-U22 no Dispaly fix done

hunnyck · 10-06-2020, 10:07

LYF water 11 FRP Reset done

http://

mobile mart · 10-09-2020, 13:24

Qmobile Smart sc7731e frp reset done, just select alcatel ot-5003d.

Phone Storage: EMMC
EXE: Avengers Spreadtrum Module 1.2
SELECTED: OT-5003D
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM407)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
FileSystem: EMMC
Manufacturer: QMobile
Hardware: sc7731e_1h20_v1.1.0
Fota platform: Sprd7731_8.1
Build Id: OPM2.171019.012
Model: Smart
Android Release: 8.1.0
Android Version: QMobileSmart_MP_07_10
Security patch: 2018-09-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:16
Done.

Mohsan Iqbal · 10-10-2020, 11:42

Action: REPAIR.
Detecting phone, wait...
Detecting phone, wait...
Phone must be off.
Connect usb cable without pressing any key.
Using connection mode 1
Detected: SPRD U2S Diag (COM98)
Readed IMEI 1: 353454354345435
Readed IMEI 2: 867400020316620
IMEI 1 to write: 353454354345435
IMEI 2 to write: 352345643564564
Write IMEI Done.
Done.

Tanha0321 · 10-15-2020, 18:48

Code:

 Exe version: Avengers Box MTK 0.7.3
 Selected model: Infinix  X5515
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
 Boot mode: Preloader
 Phone detected...Please wait
 BBCHIP: 6739 2 cb00
 Using Algo 1.
 Helio MT6739 phone detected, swithing to helio api
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6739
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010052333142 : 000000000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Modem version: MOLY.LR12A.R2.MP.V40.1
 Starting helio frp, not disconnect phone untill done
 [HELIO][frp]Format partition, please wait...
 [0]FRP Reset Done.
 [helio]Wait untill phone will start charging.
 [0]All done.

hunnyck · 11-05-2020, 08:44

OPPO F5 Pattern unlock done use via test point

hunnyck · 11-05-2020, 08:45

vivo v9 flash done

hunnyck · 11-05-2020, 08:47

Comio c1 pro frp reset done

hunnyck · 11-05-2020, 08:47

alcatel ot-4034x format done

hunnyck · 11-05-2020, 08:57

karbonn titanium S22 flash done

EXE: Avengers Spreadtrum Module 1.2
ACTION: Flash Firmware.
Selected firmware: S450A_M44_Karbonn_Titanium_S22_V0006_20150330_2008 .pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SPRD U2S Diag (COM12)
[00:00:00] Sending loader.
BOOT: SPRD3W
Sending loader, keep boot key untill loader start.
[00:00:01] Loader ok
[00:00:01] Wait for loader....
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:01] First boot done.
[00:00:01] Sending second loader.
[00:00:04] Second loader sent ok.
[00:00:04] Reading: miscdata
[00:00:04] Reading: wfixnv1
NVRAM saved to: C:\Users\hunnyck\Documents\spreadtrum_module\backu p_nvram\_9114445009******\_91144450098****_nvram_b ackup.tar
[00:00:15] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:16] Start write: wcnfixnv1
[00:00:16] Start write: prodnv
[00:00:18] Format: uboot
[00:00:18] [uboot]Format OK.
[00:00:18] Start write: splloader
[00:00:18] Start write: wmodem
[00:00:20] Start write: wdsp
[00:00:21] Start write: wcnmodem
[00:00:21] Start write: boot
[00:00:24] Start write: recovery
[00:00:27] Start write: system
Drop comunication, waiting for data
Drop comunication, waiting for data
Drop comunication, waiting for data
Drop comunication, waiting for data
[00:07:40] Start write: userdata
[00:07:54] Start write: logo
[00:07:54] Start write: fbootlogo
[00:07:55] Format: wruntimenv1
[00:07:55] [wruntimenv1]Format OK.
[00:07:55] Format: wcnruntimenv1
[00:07:55] [wcnruntimenv1]Format OK.
[00:07:55] Start write: cache
[00:07:57] Format: misc
[00:07:57] [misc]Format OK.
[00:07:57] Format: internalsd
[00:07:58] [internalsd]Format OK.
[00:07:58] Start write: uboot
Flashing done.
Log saved:
C:\Users\hunnyck\Documents\spreadtrum_module\Saved _Logs\_writepac_.txt
Total Time: 00:08:06
Done.

rsa7262 · 11-05-2020, 12:32

Code:

Phone Storage: EMMC
EXE: Avengers Spreadtrum Module 1.1
SELECTED: SC7731G_EMMC  5.x
ACTION: Erase FRP
Custom loader: Mobicel_V4.loader
Start Detect phone...
Detected: SPRD U2S Diag (COM20)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: QMobile
Hardware: k121_v1.1.0
Fota platform: Sprd7731_8.1
Fota version: QMobile_i5i 2019_MP_V2.0_13_12
Build Id: OPM2.171019.012
Build version: K121AG_8.1_QMB_PK_PR_11
Model: QMobile i5i 2019
Android Release: 8.1.0
Android Version: OPM2.171019.012 release-keys
Security patch: 2018-12-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:16
Done.

bro
rsa7262

Tanha0321 · 11-16-2020, 12:27

Code:

Exe version: Avengers Box MTK 0.7.2
 Selected model: Huawei  Ascend Y3 II[LUA-U22]
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM211)
 Boot mode: Preloader
 BBCHIP: 6582 1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E31324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

Tanha0321 · 11-16-2020, 12:27

Code:

Flash files count is :18
 Action : Firmware update.
 Selected Model: OPPO: F1S
 Exe version: Avengers Box MTK 0.7.2
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Keep VOL+ button untill inserting USB cable.
 Detected : MediaTek USB Port_V1632 (COM58)
 Boot mode: Brom
 Phone detected...Please wait
 BBCHIP: 6755 1 cb00
 Using Algo 3.
 Helio MT6755 phone detected, swithing to helio api
 Loading emmi from download
 Helio enabled DRAM in First Da: TRUE
 Sending loader.....
 BBCHIP MT6755
 [1]Storage EMMC
 EMMC FW VERSION: 00:00:00:00:00:00:00:00
 EMMC CID: 15010052583134 : 000000000000000000
 EMMC UA SIZE: 0x747c00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x748800000      [29.133 GB]
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM95)
 Starting flash helio.
  [2] WRITE TO PARTITION [ recovery ] 
  [18] WRITE TO PARTITION [ md1img ] 
  [19] WRITE TO PARTITION [ md1dsp ] 
  [20] WRITE TO PARTITION [ md1arm7 ] 
  [21] WRITE TO PARTITION [ md3img ] 
  [23] WRITE TO PARTITION [ lk ] 
  [24] WRITE TO PARTITION [ lk2 ] 
  [25] WRITE TO PARTITION [ boot ] 
  [26] WRITE TO PARTITION [ logo ] 
  [27] WRITE TO PARTITION [ tee1 ] 
  [28] WRITE TO PARTITION [ tee2 ] 
  [29] WRITE TO PARTITION [ secro ] 
  [32] WRITE TO PARTITION [ system ] 
  [35] WRITE TO PARTITION [ cache ] 
  [36] WRITE TO PARTITION [ userdata ] 
 [helio]Wait untill phone will start charging.
 [0]All done.

Tanha0321 · 11-16-2020, 12:28

Code:

Exe version: Avengers Box MTK 0.7.1
 Selected model: Huawei  Ascend Y6 Pro[TIT-AL00] ME
 [auto]Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
 Boot mode: Preloader
 BBCHIP: 321 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42 
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100513331334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Checking data, wait...
 
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

Akhtar Ali Jatt · 11-19-2020, 12:49

Flash files count is :19
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: Avengers Box MTK 0.7.2
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM32)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Loading emmi from download
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046355835 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
High speed disabled by user, continue with this settings.
Starting flash helio.
[3] WRITE TO PARTITION [ recovery ]
[15] WRITE TO PARTITION [ md1img ]
[16] WRITE TO PARTITION [ md1dsp ]
[17] WRITE TO PARTITION [ spmfw ]
[18] WRITE TO PARTITION [ mcupmfw ]
[22] WRITE TO PARTITION [ lk ]
[23] WRITE TO PARTITION [ lk2 ]
[24] WRITE TO PARTITION [ loader_ext1 ]
[25] WRITE TO PARTITION [ loader_ext2 ]
[26] WRITE TO PARTITION [ boot ]
[27] WRITE TO PARTITION [ logo ]
[28] WRITE TO PARTITION [ tee1 ]
[29] WRITE TO PARTITION [ tee2 ]
[30] WRITE TO PARTITION [ system ]
[31] WRITE TO PARTITION [ cache ]
[33] WRITE TO PARTITION [ userdata ]
[helio]Wait untill phone will start charging.
[0]All done.

10-09-2020, 13:24	#1368 (permalink)
mobile mart No Life Poster Join Date: Feb 2008 Posts: 1,080 Member: 696136 Status: Offline Thanks Meter: 210	Qmobile Smart frp bypass done. Qmobile Smart sc7731e frp reset done, just select alcatel ot-5003d. Phone Storage: EMMC EXE: Avengers Spreadtrum Module 1.2 SELECTED: OT-5003D ACTION: Erase FRP Start Detect phone... Phone must be off with battery inside. Long press "VOL -" key while inserting usb cable. For some phones need to Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM407) Sending loader, keep boot key untill loader start. Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. Send Second Loader. New flash metod detected. FileSystem: EMMC Manufacturer: QMobile Hardware: sc7731e_1h20_v1.1.0 Fota platform: Sprd7731_8.1 Build Id: OPM2.171019.012 Model: Smart Android Release: 8.1.0 Android Version: QMobileSmart_MP_07_10 Security patch: 2018-09-05 This phone have frp partition. Removing frp, wait... Format OK. Total Time: 00:00:16 Done.

10-10-2020, 11:42	#1369 (permalink)
Mohsan Iqbal Junior Member Join Date: Nov 2017 Location: cape town south africa Age: 27 Posts: 5 Member: 2774377 Status: Offline Thanks Meter: 1	Nokia c2 imei repair done in seconds Action: REPAIR. Detecting phone, wait... Detecting phone, wait... Phone must be off. Connect usb cable without pressing any key. Using connection mode 1 Detected: SPRD U2S Diag (COM98) Readed IMEI 1: 353454354345435 Readed IMEI 2: 867400020316620 IMEI 1 to write: 353454354345435 IMEI 2 to write: 352345643564564 Write IMEI Done. Done.

11-19-2020, 12:49	#1380 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,883 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,425	digit 4g Flash files count is :19 Action : Firmware update. Selected Model: 0-By CPU: ELBRUS Exe version: Avengers Box MTK 0.7.2 Scenario: [0]Safe Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek USB Port (COM32) Boot mode: Brom Phone detected...Please wait BBCHIP: 6739 2 cb00 Using Algo 1. Helio MT6739 phone detected, swithing to helio api Loading emmi from download Helio enabled DRAM in First Da: TRUE Sending loader..... BBCHIP MT6739 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 15010046355835 : 000000000000000000 EMMC UA SIZE: 0xe9000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9880000 [3.649 GB] High speed disabled by user, continue with this settings. Starting flash helio. [3] WRITE TO PARTITION [ recovery ] [15] WRITE TO PARTITION [ md1img ] [16] WRITE TO PARTITION [ md1dsp ] [17] WRITE TO PARTITION [ spmfw ] [18] WRITE TO PARTITION [ mcupmfw ] [22] WRITE TO PARTITION [ lk ] [23] WRITE TO PARTITION [ lk2 ] [24] WRITE TO PARTITION [ loader_ext1 ] [25] WRITE TO PARTITION [ loader_ext2 ] [26] WRITE TO PARTITION [ boot ] [27] WRITE TO PARTITION [ logo ] [28] WRITE TO PARTITION [ tee1 ] [29] WRITE TO PARTITION [ tee2 ] [30] WRITE TO PARTITION [ system ] [31] WRITE TO PARTITION [ cache ] [33] WRITE TO PARTITION [ userdata ] [helio]Wait untill phone will start charging. [0]All done.

10-06-2020, 10:06	#1366 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	huawei Y520-U22 no Dispaly fix done

10-06-2020, 10:07	#1367 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	LYF water 11 FRP Reset done http://

11-05-2020, 08:44	#1371 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	OPPO F5 Pattern unlock done use via test point

11-05-2020, 08:45	#1372 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	vivo v9 flash done

11-05-2020, 08:47	#1373 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	Comio c1 pro frp reset done

11-05-2020, 08:47	#1374 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	alcatel ot-4034x format done

11-05-2020, 08:57	#1375 (permalink)
hunnyck No Life Poster Join Date: Jul 2015 Location: INDIA Age: 34 Posts: 905 Member: 2431049 Status: Offline Sonork: 100.1680262:hunnyck Thanks Meter: 966	karbonn titanium S22 flash done EXE: Avengers Spreadtrum Module 1.2 ACTION: Flash Firmware. Selected firmware: S450A_M44_Karbonn_Titanium_S22_V0006_20150330_2008 .pac NV: Default Mode (protect calibration) Device Storage: EMMC Detected: SPRD U2S Diag (COM12) [00:00:00] Sending loader. BOOT: SPRD3W Sending loader, keep boot key untill loader start. [00:00:01] Loader ok [00:00:01] Wait for loader.... Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. [00:00:01] First boot done. [00:00:01] Sending second loader. [00:00:04] Second loader sent ok. [00:00:04] Reading: miscdata [00:00:04] Reading: wfixnv1 NVRAM saved to: C:\Users\hunnyck\Documents\spreadtrum_module\backu p_nvram\_9114445009****\_91144450098**_nvram_b ackup.tar [00:00:15] Start write: wfixnv1 Protecting GSM_CALI_ITEM_ID id: 0x2 Protecting W_Calibration id: 0x12D Protecting BlueTooth id: 0x191 Protecting BandSelect id: 0xD Protecting WIFI id: 0x199 Protecting MMITest id: 0x19A Protecting WIFICal1 id: 0x19F Protecting WIFICal2 id: 0x1A0 Protecting WIFICal3 id: 0x1A1 [00:00:16] Start write: wcnfixnv1 [00:00:16] Start write: prodnv [00:00:18] Format: uboot [00:00:18] [uboot]Format OK. [00:00:18] Start write: splloader [00:00:18] Start write: wmodem [00:00:20] Start write: wdsp [00:00:21] Start write: wcnmodem [00:00:21] Start write: boot [00:00:24] Start write: recovery [00:00:27] Start write: system Drop comunication, waiting for data Drop comunication, waiting for data Drop comunication, waiting for data Drop comunication, waiting for data [00:07:40] Start write: userdata [00:07:54] Start write: logo [00:07:54] Start write: fbootlogo [00:07:55] Format: wruntimenv1 [00:07:55] [wruntimenv1]Format OK. [00:07:55] Format: wcnruntimenv1 [00:07:55] [wcnruntimenv1]Format OK. [00:07:55] Start write: cache [00:07:57] Format: misc [00:07:57] [misc]Format OK. [00:07:57] Format: internalsd [00:07:58] [internalsd]Format OK. [00:07:58] Start write: uboot Flashing done. Log saved: C:\Users\hunnyck\Documents\spreadtrum_module\Saved _Logs\_writepac_.txt Total Time: 00:08:06 Done.