Samsung Clone S7582 Repair Imei And Read Flash Done [USER REPORT] ★★★★★

[kk3]

Repair Imei

Selected connection metod: Flash Connection
Exe version: Avengers Box MTK 0.6.8
Selected phone: GT-S7582(MT6575)
Action : IMEI REPAIR.
IMEI[1] for write : 358679013286704
IMEI[2] for write : 358679013286705
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [SAMSUNG] KF98G16Q4X
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 0x40000 PageSize: 0x1000 SpareSize: 0x80
Searching partiton table, wait..
Offset: 0x1ebc0000
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
Dumping data, wait.
Reading imei
IMEI[1]: 355345151
IMEI[2]: 355345151
Backup saved: C:\Avengers\android_mtk\Android_MTK_Backup_Folder\ nvram_backup\FLASH_MODE_NVRAM_MT6572_3553451512167 85_355345151216793_03_05_2020_18_56_51.zip
Writing imei
IMEI[1] TO UPDATE: 355345151
IMEI[2] TO UPDATE: 355345151
Generic IMEI OK
Wait untill phone will start charging.
[0]All done.

Read Flash

Action : Read Firmware.
Selected Samsung Clone:GT-S7582(MT6575)
Exe version: Avengers Box MTK 0.6.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [SAMSUNG] KF98G16Q4X
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 0x40000 PageSize: 0x1000 SpareSize: 0x80
Searching partiton table, wait..
Offset: 0x1ebc0000
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
IMEI[1]: 355345151
IMEI[2]: 355345151
Dumping Preloader.
Partition: PRELOADER
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EXPDB
Partition: FAT
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: BMTPOOL
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo.bin ......
Reading: BEGIN: 0x100000 - LEN: 0x100000
Start processing nvram.bin ......
Reading: BEGIN: 0x200000 - LEN: 0x300000
Start processing protect1.img ......
Reading: BEGIN: 0x500000 - LEN: 0x300000
Start processing protect2.img ......
Reading: BEGIN: 0x800000 - LEN: 0x300000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing SEC_RO secro.img
Reading: BEGIN: 0x17c0000 - LEN: 0x40000
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x39c0000 - LEN: 0x14000000
Saved to : C:\Avengers\android_mtk\Android_MTK_Backup_Folder\ firmware_backup\MT6572_NAND_2020_03_05_19_03)
Wait untill phone will start charging.
[0]All done.

[jonny12345]

Huawei Maya-AL10 Dead Set Recover flash file please