NCK Dongle / Pro Android MTK Module v2.6.3 Update Released - [20/11/2019]
 

Added


HUAWEI - Test Point

AMN-L21 - Boot info/Reset FRP/Wipe Phone
AMN-L22 - Boot info/Reset FRP/Wipe Phone
AMN-L23 - Boot info/Reset FRP/Wipe Phone
AMN-L29 - Boot info/Reset FRP/Wipe Phone
AMN-LX9 - Boot info/Reset FRP/Wipe Phone
JAT-L21 - Boot info/Reset FRP/Wipe Phone
JAT-L23 - Boot info/Reset FRP/Wipe Phone
JAT-L29 - Boot info/Reset FRP/Wipe Phone
JAT-L41 - Boot info/Reset FRP/Wipe Phone
JAT-LX1 - Boot info/Reset FRP/Wipe Phone
JAT-LX3 - Boot info/Reset FRP/Wipe Phone
JAT-TL00 - Boot info/Reset FRP/Wipe Phone
JAT-TL20 - Boot info/Reset FRP/Wipe Phone
MRD-AL00 - Boot info/Reset FRP/Wipe Phone
MRD-L11 - Boot info/Reset FRP/Wipe Phone
MRD-L22 - Boot info/Reset FRP/Wipe Phone
MRD-L23 - Boot info/Reset FRP/Wipe Phone
MRD-LX1 - Boot info/Reset FRP/Wipe Phone
MRD-LX2 - Boot info/Reset FRP/Wipe Phone
MRD-LX3 - Boot info/Reset FRP/Wipe Phone
MRD-TL00 - Boot info/Reset FRP/Wipe Phone

- Testpoint images can be opened from settings tab.


Infinix

x604 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
x626 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
x650b - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
x650c - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info


Tecno

KA7O - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
LB6 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
KB7 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
BA2 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
KA6 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
R8O - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
AX8 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
KB8(Spark 3 Pro) - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info
KB8 - FRP/Factory reset (flash and meta mode)/ Backup& Restore
KB7J - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info


Altice

S11 - FRP/Factory reset (flash and meta mode)/ Backup& Restore NVRAM (flash and meta mode)/Repair IMEI/Flashing/Read Info


Official Website:

NCK DONGLE

Download from Support Access Software to Access Download Area

waiting FOR NCK-BOX TOO UPDATES

nice update thnx



regards

Nice update, keep on the good work

Great update .... More big update.....

great work thnx team

Good job waiting for Qcom module !!

wow amazing update thanks team

great update was long waiting

Good update team..we need more support for dra-xx
Dua-xx for repair imei and reset frp

Thanks for the update, a novelty does not open the test port directory

the file not uploded to support area Android MTK Module v2.6.3

It's already fixed. Now the Android MTK Module v2.6.3 is available in the download area.☺

nck dongle no abre los modulos nck android mtk 2.6.1.0 ni 2.6.2.0 menos el 2.6.3.0

los demas si abren incluso los de umt

to the team when i click test point image in serring tab nothing apper kindly check it

nck dongle team boos

good update
but please update spd tab

Nice
- Testpoint images can be opened from settings tab

Testpoint images can be opened from settings tab

Not open Testpoint help plz?

same to me not open the test point image

It must open testpoint directory in exe directory.
Try to check if this directory exists.

Nice update team always best NCK team

Have These MTK Models Not Work With Direct Boot? Just Like Other Generic MTK Models
In order to Boot on interface Need to Connect Test point Just Like Qualcomm phones
Right?

Yes, you right.
This phones have protected boot, without factory rsa key is the only way to service this phones.

NckDongle_AndroidMTK_v2.6.3.0_fixed_Setup.7z was uploaded in support.
In this setup was fixed problem with testpoin directory, please download this setup.

Nice update..good job nck team

Nice update, keep on the good work

Action : IMEI REPAIR.
IMEI[1] for write : 355727086596555
IMEI[2] for write : 355727086596524
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[37]Detected: MediaTek USB Port (COM37)
\\?\usb#vid_0e8d&pid_0003#5&21287ed5&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[165]META Port Detected: OPPO PreLoader USB VCOM (Android) (COM165)
USB\VID_22D9&PID_0006\5&1FFF41DB&0&6
Start sync target, waiting responce.....
ChipID: MT6750,S01
Using Algo 3.
Brand: OPPO
Board: full_oppo6750_15131
Model: A1601
Name: A1601
Release: A1601EX_11_A.20_170715
Version: 5.1
Platform: MT6755
NVRAM Dumped OK.
C:\Users\ADMIN\Documents\Android_MTK\nvram_backup\ META_MODE_NVRAM_MT6755_A1601_11_21_2019_17_12_14.z ip
Reading imei
IMEI[1]: 861309034381143
IMEI[2]: 861309034381151
Writing imei
IMEI[1] TO UPDATE: 355727086596555
IMEI[2] TO UPDATE: 355727086596524
Writing data, wait....
IMEI repair OK.
[0]All done.

Good Explanation, I Now Understand
Good Work Team

ican not find the link please put the link
 

ican not find the link please put the link

thanks for he update..................

really very good update

very good update team thanks. will request one thing more option to save custom DA for future use.
E.g i have one DA file that works with almost all new tecno and infinix so want to save it for future use thanks

You can send me and specify for what models it work.
Will add this models in exe for direct servicing.

https://3.top4top.net/p_1423ykegf1.png




broblem download setup


https://4.top4top.net/p_142377b1d2.png

i sent you a pm with the DA link and so far tested models

Nice update NCK Team.

how can I download thi version

but i cant download sir

Thanks for files, but you not checked our update, exactly this models was added in this update.

hello orbit, a question friend, how do I get or create the DA of any team? I at least have some new blu models in my store and so collaborate with those DA

exelent box 2019 good

add miror download link.7 hours need to download.

I'am just checked download speed, and is ok.
Not really fast but 2-3mb/sec is ok for most proposes.
Download take +- 1min.

Hi,

Can i get link for download nck main module?

Thanks in advance!!

Just for curiosity will ask.
Instead of spam in this thread with offtopic message, what stop you to read this sticky thread and solve your problem? :confused:

http://forum.gsmhosting.com/vbb/f826...tware-2753987/

Which one is ??https://uploads.tapatalk-cdn.com/201...61fe4cbd0e.jpg



Sent from my iPhone using Tapatalk

And what exactly stop you to scroll files?
Is not posible to make exe form so big to keep all files visible without need to scroll files.
You not used any pc till now?

Ahh sorry : D

Thanks !!

https://uploads.tapatalk-cdn.com/201...70d4fe3dc9.jpg



Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk