Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 340 - GSM-Forum

-=C.J.S=- · 01-06-2017, 01:39

PHONiX MOBILE J3 TMPA DONE W/NCK Dongle SPRD Module v0.4 Update Released..

ibrajinja · 01-07-2017, 18:02

Com port ok : COM14
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM14)
BaseBand CPU : MT6276
SW_VER : V322_01A_CFZZ_QVGA_WGD_YC8_V06
HW_VER : V322_01A
Meta mode conected ok, start reading phone....
Phone imei[1] : 359767056740351
Phone imei[2] : 359767056740369
UNLOCK SIM[1]:
Unlock ok sim[1]
UNLOCK SIM[2]:
Unlock ok sim[2]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
SIMLOCK INFO[2]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

krimmo · 01-08-2017, 17:33

Lenovo A1000 unlocked

ACTION: Read Info.
Detecting phone, wait...
Detected: SCI USB2Serial (COM30)
Port Opened OK.
Platform Version: MOCORTM_14B_W15.24_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_MP_II_W15.31
HW Version: sc7731g_CP0_modem
07-28-2015 11:08:428^
IMEI 1: 860199039******
IMEI 2: 860199039******

[USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10]
[2]Simlock Type: 8738 13107
Sim 1 Unlock Code: 70403307
Sim 2 Unlock Code: 40695572
Warning, this is factory key, some opperators can modify factory key.
Done.

YuMERA · 01-09-2017, 11:28

Vivax Snart Fun S4012 Factory reset

Action: Reset Phone.
Detecting phone, wait...
Detected: SCI Anroid USB2Serial (COM12)
Port Opened OK.
Platform Version: MOCORTM_W15.42_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_MP_II_W15.42
HW Version: sc7731g_CP0_modem
10-15-2015 21:23:39
IMEI 1: 353245061693853
IMEI 2: 353245061693861
DONE
Reset done, phone must restart.
Done.

Shohel_sst · 01-09-2017, 11:29

PHONE: OT-9020A
Port: Android HS-USB Diagnostics AF0E (COM210)
Build id: MPSS.DPM.2.0.2.c1.6-00022-M8936FAAAANUZM-1.26298.1.28320.1
Compile Date: Oct 28 2015
Compile time: 16:23:40
Release date: Aug 31 2015
Release time: 03:00:00
IMEI: 014497001459876
Reading, wait.
Backup saved to: C:\Users\Siam Telecolm\Documents\NckMain\backup\alcatel_android\ OT-9020A_014497001459876_simlock_backup_1.bin

Simlock Status:
SIMLOCK[0] Locked: Counter[7]
SIMLOCK[1] Unlocked
SIMLOCK[2] Unlocked
SIMLOCK[3] Unlocked
SIMLOCK[4] Unlocked
Start direct unlock, wait....
Direct unlock done.
Please restart phone.
--------------------------
Log saved to:
C:\Users\Siam Telecolm\Documents\NckMain\Exe_Logs\OT-9020A_014497001459876_unlock_1.txt
Done.

fokal2008 · 01-09-2017, 18:54

MTN SMART L860 FRP REMOVE OK

Code:

 Exe version: NCKBox AndroidMTK 1.8.7.5
 Selected model: MT6735M
 Action: Reset FRP
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6735M_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A48384731 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Preloader SEC version: 2
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.

MaxPayne · 01-09-2017, 19:27

tele2fon v4 unlocked

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.7.3
Selected model: Tele2fon V4
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
[26]Detected: PreLoader USB VCOM Port (COM26)
\\?\usb#vid_0e8d&pid_2000#5&476fb6f&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[74]META Port Detected: Gadget CDC VCOM Driver (COM74)
USB\VID_0E8D&PID_2007\5&476FB6F&0&5
Start sync target, waiting responce.....
[AP]BaseBand CPU : MT6572,S01
[META]BaseBand CPU : MT6572, E01
[META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V1.F2.P5
[META]HW_VER : SAGETEL72_WET_JB3_HSPA_HW
Phone imei[1] : 351752xxxxxxxxx
Phone imei[2] : 111111111111119
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Wrong data reseived from target!!!!!
CHK reseived:61 CHK Calculated: 91
Direct unlock done
All done.

4mula · 01-09-2017, 23:15

ALCATEL 1010X direct unlock done
USB selected
USB Connection selected.
EXE VERSION: NCKBox MTK Tool 3.5
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM43
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM43)
BaseBand CPU : MT6250
SW_VER : MAUI.11B.W11.32.SP.V12.F8
HW_VER : JRDHZ50M_11B_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 865450XXXXXXXXX
User code(Inactive) : 1234
Phone model: OT-1010X
SIMLOCK INFO[1]
SECRO NAME: XW7EPEB0
SIMLOCK STATUS: PHONE IS LOCKED
NCK: 0347562874 Counter[10/10]
NSCK: 2834082399 Counter[10/10]
SPCK: 2694817906 Counter[10/10]
SIM: 1442222183
CORPORATE: 0406973187
SIMLOCK END

META END OK.

Thanks to the best box on earth!!!!!!!!!!

razib143 · 01-10-2017, 17:09

Wiko K-Kool Unlock done.

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.5
Selected model: MT6580
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6580
Phone must be off with battery inside.
Please insert USB cable now...
[92]Detected: PreLoader USB VCOM (Android) (COM92)
\\?\usb#vid_0e8d&pid_2000#5&1bbd4c1c&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[161]META Port Detected: Android Gadget VCOM Driver (COM161)
USB\VID_0E8D&PID_2007\5&1BBD4C1C&0&8
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V57.P4
[META]HW_VER : TINNO6580_WE_M_HSPA_HW
Phone imei[1] : 357904070420AAA
Phone imei[2] : 357904070482AAA
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

gunit1 · 01-10-2017, 17:23

IT 1409 FRP done !!!

Code:

EXE: NckDongle Spreadtrum Module 0.4
SELECTED: SC7720EA_EMMC  5.x
ACTION: Reset FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM26)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: itel
Hardware: SP7720EA_V1.0.0
Platform: sc8830
Board: itel_it1409
Build Id: LMY47D
Model: itel it1409
Android Release: 5.1
Android Version: LMY47D release-keys
IMEI 1: 359364078629406
IMEI 2: 359364078629414
[USER]Simlock Status: UNLOCKED
Simlock Type: 0
Removing frp, wait...
Format OK.
Total Time: 00:00:34

reena telecome · 01-10-2017, 17:46

ot2045x unlocking via nck boUSB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM31
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM31)
BaseBand CPU : MT6276
SW_VER : 2045X_L2EN_V1.5_160712_CAM30_MCP128_64_FM_BT_AU_OP TUS
HW_VER : HW01
Meta mode conected ok, start reading phone....
Phone imei[1] : 351530082392680
Phone imei[2] : 351530082392680
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.
x conect switch of phone press with zero

wsmobile · 01-11-2017, 08:52

DORO 632 done..

USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.49
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM86
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM86)
BaseBand CPU : MT6276
SW_VER : SHUTTLE02A-S05A_DORO632_L17EN_202_140814
HW_VER : CKT76_11A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 352427060298022
Phone imei[2] : 352427060298022
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

fokal2008 · 01-11-2017, 12:10

X--BOX M8 FLASHING DONE BY GREAT NCK BOX

Code:

 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6580
 Exe version: NCKBox AndroidMTK 1.8.7.5
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6580_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (28Gb+4096Mb) UNKNOWN_EMMC_DEVICE 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 3701FF454D4330 : 000000000000000000
 EMMC UA SIZE: 0xe6800000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7400000       [3.613 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Warning, flashing preloader disabled! 
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.

fokal2008 · 01-12-2017, 18:25

MTN SMART S620 READ PATTERN LOCK CODE DONE BY NCKBOX

Code:

 Exe version: NCKBox AndroidMTK 1.8.7.6
 Selected model: MT6572_EMMC
 Action: Read Pattern
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM101)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 11010030303447 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Preloader SEC version: 2
 **************************************
 1 2 3
 4 5 6
 7 8 9
 Pattern: 38159
 **************************************
 Pattern HEX: F5E7B3A038994B1168F32AA8EF2B7B74573CB70B
 **************************************
 Wait untill phone will start charging.
 All done.

danisajee · 01-13-2017, 13:35

Code:

 Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.7.3
 Selected model: T815
 Action: Unlock
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM110)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A48344732 : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM139)
 IMEI[1]: 868669023107751
 IMEI[2]: 868669023107751
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:10) Code : 911945593940 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 SIM[2]: 
 Block1(N): Locked (remain:10) Code : 911945593940 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 Unlock finished.
 Wait untill phone will start charging.
 All done.

01-06-2017, 01:39	#5086 (permalink)
-=C.J.S=- Freak Poster Join Date: Jan 2008 Location: philippines Posts: 346 Member: 669596 Status: Offline Sonork: 1657504 Thanks Meter: 136	PHONiX MOBILE J3 TMPA DONE.. PHONiX MOBILE J3 TMPA DONE W/NCK Dongle SPRD Module v0.4 Update Released..

01-07-2017, 18:02	#5087 (permalink)
ibrajinja No Life Poster Join Date: Aug 2007 Location: Africa.uganda Posts: 2,121 Member: 562975 Status: Offline Sonork: better tomorow Thanks Meter: 247	mtn buzz c390 Com port ok : COM14 Phone detected...Please wait Conected ok with target ... Reopen comport(COM14) BaseBand CPU : MT6276 SW_VER : V322_01A_CFZZ_QVGA_WGD_YC8_V06 HW_VER : V322_01A Meta mode conected ok, start reading phone.... Phone imei[1] : 359767056740351 Phone imei[2] : 359767056740369 UNLOCK SIM[1]: Unlock ok sim[1] UNLOCK SIM[2]: Unlock ok sim[2] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked SIMLOCK INFO[2]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.

01-09-2017, 11:29	#5090 (permalink)
Shohel_sst No Life Poster Join Date: Aug 2007 Location: Dhaka mirpur-1 Age: 38 Posts: 909 Member: 577653 Status: Offline Thanks Meter: 235	Alcatel 6045o unlock done PHONE: OT-9020A Port: Android HS-USB Diagnostics AF0E (COM210) Build id: MPSS.DPM.2.0.2.c1.6-00022-M8936FAAAANUZM-1.26298.1.28320.1 Compile Date: Oct 28 2015 Compile time: 16:23:40 Release date: Aug 31 2015 Release time: 03:00:00 IMEI: 014497001459876 Reading, wait. Backup saved to: C:\Users\Siam Telecolm\Documents\NckMain\backup\alcatel_android\ OT-9020A_014497001459876_simlock_backup_1.bin Simlock Status: SIMLOCK[0] Locked: Counter[7] SIMLOCK[1] Unlocked SIMLOCK[2] Unlocked SIMLOCK[3] Unlocked SIMLOCK[4] Unlocked Start direct unlock, wait.... Direct unlock done. Please restart phone. -------------------------- Log saved to: C:\Users\Siam Telecolm\Documents\NckMain\Exe_Logs\OT-9020A_014497001459876_unlock_1.txt Done.

01-09-2017, 23:15	#5093 (permalink)
4mula Freak Poster Join Date: Jan 2014 Location: Zimbabwe Posts: 225 Member: 2100642 Status: Offline Thanks Meter: 46	Alcatel 1010X unlock with usb ALCATEL 1010X direct unlock done USB selected USB Connection selected. EXE VERSION: NCKBox MTK Tool 3.5 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM43 Phone detected...Please wait Conected ok with target ... Reopen comport(COM43) BaseBand CPU : MT6250 SW_VER : MAUI.11B.W11.32.SP.V12.F8 HW_VER : JRDHZ50M_11B_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 865450XXXXXXXXX User code(Inactive) : 1234 Phone model: OT-1010X SIMLOCK INFO[1] SECRO NAME: XW7EPEB0 SIMLOCK STATUS: PHONE IS LOCKED NCK: 0347562874 Counter[10/10] NSCK: 2834082399 Counter[10/10] SPCK: 2694817906 Counter[10/10] SIM: 1442222183 CORPORATE: 0406973187 SIMLOCK END META END OK. Thanks to the best box on earth!!!!!!!!!! Last edited by 4mula; 01-09-2017 at 23:22.

01-08-2017, 17:33	#5088 (permalink)
krimmo No Life Poster Join Date: Feb 2007 Location: ALGERIA Posts: 942 Member: 447187 Status: Offline Thanks Meter: 107	Lenovo A1000 unlocked ACTION: Read Info. Detecting phone, wait... Detected: SCI USB2Serial (COM30) Port Opened OK. Platform Version: MOCORTM_14B_W15.24_Debug Project Version: sc7731g_CP0_modem BASE Version: TM_BASE_MP_II_W15.31 HW Version: sc7731g_CP0_modem 07-28-2015 11:08:428^ IMEI 1: 860199039**** IMEI 2: 860199039**** [USER]Simlock Status: LOCKED[1] Simlock Counter:[10/10] [2]Simlock Type: 8738 13107 Sim 1 Unlock Code: 70403307 Sim 2 Unlock Code: 40695572 Warning, this is factory key, some opperators can modify factory key. Done.

01-09-2017, 11:28	#5089 (permalink)
YuMERA Freak Poster Join Date: Feb 2004 Location: Serbia Posts: 233 Member: 55980 Status: Offline Thanks Meter: 78	Vivax Snart Fun S4012 Factory reset Action: Reset Phone. Detecting phone, wait... Detected: SCI Anroid USB2Serial (COM12) Port Opened OK. Platform Version: MOCORTM_W15.42_Debug Project Version: sc7731g_CP0_modem BASE Version: TM_BASE_MP_II_W15.42 HW Version: sc7731g_CP0_modem 10-15-2015 21:23:39 IMEI 1: 353245061693853 IMEI 2: 353245061693861 DONE Reset done, phone must restart. Done.

01-09-2017, 19:27	#5092 (permalink)
MaxPayne Freak Poster Join Date: Nov 2006 Location: europe Posts: 481 Member: 387971 Status: Offline Thanks Meter: 64	tele2fon v4 unlocked Selected connection metod: META Mode Exe version: NCKDongle AndroidMTK 2.5.7.3 Selected model: Tele2fon V4 Action: Unlock Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6572 Phone must be off with battery inside. Please insert USB cable now... [26]Detected: PreLoader USB VCOM Port (COM26) \\?\usb#vid_0e8d&pid_2000#5&476fb6f&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [74]META Port Detected: Gadget CDC VCOM Driver (COM74) USB\VID_0E8D&PID_2007\5&476FB6F&0&5 Start sync target, waiting responce..... [AP]BaseBand CPU : MT6572,S01 [META]BaseBand CPU : MT6572, E01 [META]SW_VER : MOLY.WR8.W1315.MD.WG.MP.V1.F2.P5 [META]HW_VER : SAGETEL72_WET_JB3_HSPA_HW Phone imei[1] : 351752xxxxxxxxx Phone imei[2] : 111111111111119 Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Wrong data reseived from target!!!!! CHK reseived:61 CHK Calculated: 91 Direct unlock done All done.

01-10-2017, 17:09	#5094 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Wiko K-Kool Unlock done. Selected connection metod: META Mode Exe version: NCKBox AndroidMTK 1.8.7.5 Selected model: MT6580 Action: Unlock Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6580 Phone must be off with battery inside. Please insert USB cable now... [92]Detected: PreLoader USB VCOM (Android) (COM92) \\?\usb#vid_0e8d&pid_2000#5&1bbd4c1c&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [161]META Port Detected: Android Gadget VCOM Driver (COM161) USB\VID_0E8D&PID_2007\5&1BBD4C1C&0&8 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6580,S01 [META]BaseBand CPU : MT6580B, E00 [META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V57.P4 [META]HW_VER : TINNO6580_WE_M_HSPA_HW Phone imei[1] : 357904070420AAA Phone imei[2] : 357904070482AAA Start direct unlock[SIM1] Direct unlock done Start direct unlock[SIM2] Direct unlock done Clean Boot flag ok. All done.

01-10-2017, 17:46	#5096 (permalink)
reena telecome Freak Poster Join Date: Mar 2012 Location: MOTHERBOARD Posts: 115 Member: 1732410 Status: Offline Sonork: 100.1614124 Thanks Meter: 20	ot2045x unlocking via nck boUSB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM31 Phone detected...Please wait Conected ok with target ... Reopen comport(COM31) BaseBand CPU : MT6276 SW_VER : 2045X_L2EN_V1.5_160712_CAM30_MCP128_64_FM_BT_AU_OP TUS HW_VER : HW01 Meta mode conected ok, start reading phone.... Phone imei[1] : 351530082392680 Phone imei[2] : 351530082392680 UNLOCK SIM[1]: Unlock ok sim[1] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done. x conect switch of phone press with zero

01-11-2017, 08:52	#5097 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	DORO 632 done.. USB Connection selected. EXE VERSION: NCKDongle MTK Tool 1.49 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM86 Phone detected...Please wait Conected ok with target ... Reopen comport(COM86) BaseBand CPU : MT6276 SW_VER : SHUTTLE02A-S05A_DORO632_L17EN_202_140814 HW_VER : CKT76_11A_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 352427060298022 Phone imei[2] : 352427060298022 UNLOCK SIM[1]: Unlock ok sim[1] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.