Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 450 - GSM-Forum

tyking5 · 09-15-2018, 02:18

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM5) detected.
Hello received.
HW ID: 00000400E1B00600 MSM8940
PK HASH: FDAC87167C2B5ABD71D9D9D948B180B8DAFE3F0FC6AF795BD6 7E17ADC7233D58
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8937
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 29.12 GB Partitions count: 47
[02D11FDF]Userdata Size: 22.54 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....

gunit1 · 09-16-2018, 12:21

Tecno CA7 FRP done

melotech · 09-17-2018, 11:20

Virgin VM575 Unlock Done Withe NCK Dongle

EXE: NckDongle Spreadtrum Module 0.5
SELECTED : SC6531
ACTION: Unlock.
SCENARIO: SC6531.
Start Detect phone.
Remove the battery and connect handset to PC via USB cable.
After long press boot key while inserting the battery.
Keep key untill boot complete.
Detected: SCI USB2Serial (COM15)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: WINBOND: [0x400000]W25Q32FV
Reading Flash Info, wait...
Flash Size: $400000 Sector Size: $8000
NVRAM Status: NV_MINVALID_SOK
Checking nvram, wait....
Model: 1060X-2BVGGB3J
Using mode 1
Writing simlock, wait...
Write Done.
Backup saved: backup\spd_nvram_backup\SC6531_352273017386340_sav ed_nv_1.bin
Total Time: 00:00:20
Done.

Yusuf Lawal · 09-17-2018, 21:29

HUAWEI G7105 NETWORK LOCK DONE
USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.50
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM13
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM13)
BaseBand CPU : MT6253, E04
SW_VER : W5.1EG01V01.07
HW_VER : BYD53_10A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 867874002293496
User code(128) : 1234
SIMLOCK INFO[1]:
Block1[N]: Locked (remain:5) Code : 37778617
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.

Yusuf Lawal · 09-17-2018, 21:30

HUAWEI G7105 NETWORK LOCK DONE
USB Connection selected.
EXE VERSION: NCKDongle MTK Tool 1.50
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM13
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM13)
BaseBand CPU : MT6253, E04
SW_VER : W5.1EG01V01.07
HW_VER : BYD53_10A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 867874002293496
User code(128) : 1234
SIMLOCK INFO[1]:
Block1[N]: Locked (remain:5) Code : 37778617
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.

elysee · 09-17-2018, 23:54

{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl {\f0\fnil Arial;}}
\viewkind4\uc1\pard\f0\fs20 Exe Version: NckBox Qualcomm Module 0.12.5
\par Operation: Factory Format
\par Searching for phone.....
\par Port: ZTE Handset Diagnostic Interface(DFU) (COM24)
\par Rebooting in download mode, wait...
\par Hello received.
\par HW ID: 0400000010000000
\par Waiting for download mode...
\par *************************************
\par
\par }
{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl {\f0\fnil Arial;}}
\viewkind4\uc1\pard\f0\fs20 Exe Version: NckBox Qualcomm Module 0.12.5
\par Operation: Reset FRP
\par Searching for phone.....
\par Qualcomm HS-USB QDLoader 9008 (COM12) detected.
\par Hello received.
\par HW ID: 00000400E1009600 MSM8909
\par PK HASH: 86C4F630CBC412FD52CAA4110179F89A14670D1D01757D9111 7E0167D4AF3F37
\par Checking database for suitable loader.....
\par Arhitecture:32 bits
\par [32]Sending loader, please wait..
\par Waiting for loader to start...
\par [1] Send NOP ok, loader start.
\par CPU: MSM8909
\par MaxPayloadSizeFromTargetInBytes: 4096
\par MaxPayloadSizeToTargetInBytes: 8192
\par Reading partition info, wait.
\par Volume[0] Size: 7.28 GB Partitions count: 30
\par [006AFFDF]Userdata Size: 3.34 GB
\par Erasing FRP, wait.....
\par Erasing FRP, finished
\par Restarting phone.....

DUSKnenixs · 09-18-2018, 11:24

2018-09-18 11:19:35.972 Autodetect COM port and phone type start!
2018-09-18 11:19:36.648 Found COM port: COM4
2018-09-18 11:19:36.651 Found phone type: Huawei Android phone (HiSilicon CPU)
2018-09-18 11:19:36.654 Open COM port COM4 (Android Adapter PCUI (COM4))...
2018-09-18 11:19:36.758 Start read phone info!
2018-09-18 11:19:36.767 Connecting to server...
2018-09-18 11:19:37.133 Connected!
2018-09-18 11:19:45.013 Waiting for server responce (up to 29 seconds left)...
2018-09-18 11:19:49.388 CP State: ready
2018-09-18 11:19:49.391 Read phone basic info...
2018-09-18 11:19:49.891 Read phone secure info...
2018-09-18 11:19:55.773 Read phone info done!

Model: WAS-L01A
MEID: 00000000000000
pESN: 00000000
IMEI: 86731
IMEI2: 000000000000000
IMEI3: 867315
IMEISV: 45
Firmware ver.: System 8.0.0.046(0EGQ)
SN: H3XDU1
PCB SN: DU4FCD
WiFi MAC: 54:B1:21

0:BD:02
BlueTooth MAC: 54:B1:21

0:BE:FB
Vendor: vodafone
Country: pt
FASTBOOT:Chipset-dallas8.0.1.001(019L)_FASTBOOT
BOOT:System 8.0.0.046(0EGQ)_BOOT
RECOVERY

unknow)
SYSTEM:System 8.0.0.046(0EGQ)
MAINVER:System 8.0.0.046(0EGQ)
DATAVER:WAS-LX1A 8.0.0.365(C02)_DATA_WAS-L01A_vodafone_default
APTIME:Wed Jul 11 19:16:50 CST 2018
RAM: 4G
eMMC: 32G
eMMC ID: 450100444634303332013F54FB6A8400
HUN: 0000000000000000

IMEI 1 Sim Lock status:
NET: locked, unlock retry counts: 10
NETSUB: unlocked
SP: unlocked

2018-09-18 11:19:55.927 Phone info data backup saved to file C:\Users\user\Desktop\NCK Dongle Ultimate Huawei_Setup_v272\Backup\20180918_111955_000000000 00000.BAK

2018-09-18 11:19:59.598 Autodetect COM port and phone type start!
2018-09-18 11:20:02.282 Found COM port: COM4
2018-09-18 11:20:02.288 Found phone type: Huawei Android phone (HiSilicon CPU)
2018-09-18 11:20:02.472 Connecting to server...
2018-09-18 11:20:02.825 Connected!
2018-09-18 11:20:02.833 Open COM port COM4 (Android Adapter PCUI (COM4))...
2018-09-18 11:20:10.720 Waiting for server responce (up to 29 seconds left)...
2018-09-18 11:20:18.833 CP State: ready
2018-09-18 11:20:18.850 Read phone basic info...
2018-09-18 11:20:19.334 Read phone secure info...

2018-09-18 11:20:25.184 Phone info data backup saved to file C:\Users\user\Desktop\NCK Dongle Ultimate Huawei_Setup_v272\Backup\20180918_112025_000000000 00000.BAK

2018-09-18 11:20:25.197 Unlocking start
2018-09-18 11:20:25.208 Phone secure identify start
2018-09-18 11:20:30.234 Waiting for server responce (up to 29 seconds left)...
2018-09-18 11:20:31.871 Phone secure identify success!
2018-09-18 11:20:31.885 Read from server...
2018-09-18 11:20:32.166 Read from server success!
2018-09-18 11:20:35.837 Unlock done!

sajid01913 · 09-20-2018, 09:18

FRP Reset Done

Detected : MediaTek DA USB VCOM (Android) (COM262)
This phone have FRP partition.
Build ID: MRA58K
Display ID: H400_HW1_V12
Version: 6.0
Build Date: Wed Jul 20 17:54:07 CST 2016
Model: H400
Brand: Symphony
Device: H400
Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_pri6735.65u.m0_P17

Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM156)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513832334d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513832334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
-Reading GPT Drive OK
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.

ramykhlil2 · 09-21-2018, 14:37

hi team can you help me ? i have blackberry STH100-2 he,s set logo stuck i serched but not fund frimware for this phone pleas can u help and thnx

wariomvc · 09-22-2018, 03:31

Quote:

Exe Version: NckBox Qualcomm Module 0.12.5
Operation: Unlock phone.
Searching for phone.....
Android HS-USB QDLoader 9008 (COM10) detected.
Hello received.
HW ID: 24004200E1009600 MSM8909
PK HASH: 5B4E559E6E66D5BA8BE6267CD83376EB2EB3717D1DD3436A63 90165B0C78CC7B
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8909
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 3.53 GB Partitions count: 38
[001CF7DF]Userdata Size: 926.98 MB
Manufacturer: unknown
Cpu: armeabi-v7a
Build Id: MMB29M
Model: Alcatel QUICKFLIP
Android Release: 6.0.1
Android Version: MMB29M test-keys
Config: diag,serial_smd,rmnet_qti_bam,adb
Security patch: xxxx-xx-xx
IMEI: 014896000901210
Model: 4044C-2ARKUS1
Step 1 ok.
Processing.
Processing.
Writing simlock.
Writing simlock ok.
Restarting phone.....
*************************************

Alcatel 4044C Unlock Done
Conecct Phone Off, Select 4044O model, and port qualcomm modem

luzer · 09-22-2018, 07:19

Alcatel OT-222 .......

Quote:

Exe Version: NCKdongle v19.0
IMEI checksum seems ok
Model: OT222
IMEI: 01200300-------
PID: TLGT3
NCK : 0202235084
NSCK: 2232914280
SPCK: 1650488037
SIM : 3675831167
CORPORATE: 1596938007

Yusuf Lawal · 09-25-2018, 18:05

[WORLD 1ST] SERVO A8 FACTORY RESET DONE IN DIAG MODE
Action: Reset Phone.
Detecting phone, wait...
Detected: SPRD DIAG (COM68)
Port Opened OK.
Platform Version: MOCOR_880XG_MODEM_W13.04_Debug
Project Version: sc6820_modem
BASE Version: DM_BASE_12A_W13.04
HW Version: sc6820_modem
01-23-2013 11:06:41
IMEI 1: 352291045XXXXXX
IMEI 2: 352291045XXXXXX
DONE
Done.

wsmobile · 09-26-2018, 06:04

VIVI 1726 Y85 done.

Action : Reset to factory default.
Selected Model: 0-By CPU:MT6765
Exe version: NCKDongle AndroidMTK 2.5.9.3
Scanning for presents meta ports...
Detected(73) : MediaTek ETS Port (COM73)
Start sync target, waiting responce.....
ChipID: MT6765,S01
Using Algo 1.
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
All done.

thedoc1967 · 09-26-2018, 08:38

Exe version: NCKBox AndroidMTK 1.8.9.4
Selected model: ELBRUS
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM20)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (57Gb+4096Mb) KSI 0x454838454134
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454838454134 : 00000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM21)
Dumping data, wait.
Value found, processing[010c][00460000]
Resetting phone.
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x2000000
All done.

thedoc1967 · 09-26-2018, 12:39

Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM20)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ced00000 [7.231 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM21)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache begin: 0x97000000 length: 0x19000000
Partition: userdata begin: 0xb0000000 length: 0x11d080000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.

09-15-2018, 02:18	#6736 (permalink)
tyking5 Freak Poster Join Date: Jul 2014 Location: Marshall Islands Posts: 192 Member: 2215160 Status: Offline Sonork: unlocki2018 Thanks Meter: 32	Frp zte z982 Exe Version: NckDongle Qualcomm Module 0.12.1 Operation: Reset FRP Searching for phone..... Qualcomm HS-USB QDLoader 9008 (COM5) detected. Hello received. HW ID: 00000400E1B00600 MSM8940 PK HASH: FDAC87167C2B5ABD71D9D9D948B180B8DAFE3F0FC6AF795BD6 7E17ADC7233D58 Checking database for suitable loader..... Arhitecture:32 bits [32]Sending loader, please wait.. Waiting for loader to start... CPU: MSM8937 MaxPayloadSizeFromTargetInBytes: 4096 MaxPayloadSizeToTargetInBytes: 8192 Reading partition info, wait. Volume[0] Size: 29.12 GB Partitions count: 47 [02D11FDF]Userdata Size: 22.54 GB Erasing FRP, wait..... Erasing FRP, finished Restarting phone.....

09-17-2018, 23:54	#6741 (permalink)
elysee Junior Member Join Date: Aug 2015 Location: haiti Posts: 12 Member: 2438957 Status: Offline Thanks Meter: 0	frp zte z835 succesfully done {\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl {\f0\fnil Arial;}} \viewkind4\uc1\pard\f0\fs20 Exe Version: NckBox Qualcomm Module 0.12.5 \par Operation: Factory Format \par Searching for phone..... \par Port: ZTE Handset Diagnostic Interface(DFU) (COM24) \par Rebooting in download mode, wait... \par Hello received. \par HW ID: 0400000010000000 \par Waiting for download mode... \par ************************************* \par \par } {\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl {\f0\fnil Arial;}} \viewkind4\uc1\pard\f0\fs20 Exe Version: NckBox Qualcomm Module 0.12.5 \par Operation: Reset FRP \par Searching for phone..... \par Qualcomm HS-USB QDLoader 9008 (COM12) detected. \par Hello received. \par HW ID: 00000400E1009600 MSM8909 \par PK HASH: 86C4F630CBC412FD52CAA4110179F89A14670D1D01757D9111 7E0167D4AF3F37 \par Checking database for suitable loader..... \par Arhitecture:32 bits \par [32]Sending loader, please wait.. \par Waiting for loader to start... \par [1] Send NOP ok, loader start. \par CPU: MSM8909 \par MaxPayloadSizeFromTargetInBytes: 4096 \par MaxPayloadSizeToTargetInBytes: 8192 \par Reading partition info, wait. \par Volume[0] Size: 7.28 GB Partitions count: 30 \par [006AFFDF]Userdata Size: 3.34 GB \par Erasing FRP, wait..... \par Erasing FRP, finished \par Restarting phone.....

09-18-2018, 11:24	#6742 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	huawei WAS-LX1A unlock done 2018-09-18 11:19:35.972 Autodetect COM port and phone type start! 2018-09-18 11:19:36.648 Found COM port: COM4 2018-09-18 11:19:36.651 Found phone type: Huawei Android phone (HiSilicon CPU) 2018-09-18 11:19:36.654 Open COM port COM4 (Android Adapter PCUI (COM4))... 2018-09-18 11:19:36.758 Start read phone info! 2018-09-18 11:19:36.767 Connecting to server... 2018-09-18 11:19:37.133 Connected! 2018-09-18 11:19:45.013 Waiting for server responce (up to 29 seconds left)... 2018-09-18 11:19:49.388 CP State: ready 2018-09-18 11:19:49.391 Read phone basic info... 2018-09-18 11:19:49.891 Read phone secure info... 2018-09-18 11:19:55.773 Read phone info done! Model: WAS-L01A MEID: 00000000000000 pESN: 00000000 IMEI: 86731 IMEI2: 000000000000000 IMEI3: 867315 IMEISV: 45 Firmware ver.: System 8.0.0.046(0EGQ) SN: H3XDU1 PCB SN: DU4FCD WiFi MAC: 54:B1:210:BD:02 BlueTooth MAC: 54:B1:210:BE:FB Vendor: vodafone Country: pt FASTBOOT:Chipset-dallas8.0.1.001(019L)_FASTBOOT BOOT:System 8.0.0.046(0EGQ)_BOOT RECOVERYunknow) SYSTEM:System 8.0.0.046(0EGQ) MAINVER:System 8.0.0.046(0EGQ) DATAVER:WAS-LX1A 8.0.0.365(C02)_DATA_WAS-L01A_vodafone_default APTIME:Wed Jul 11 19:16:50 CST 2018 RAM: 4G eMMC: 32G eMMC ID: 450100444634303332013F54FB6A8400 HUN: 0000000000000000 IMEI 1 Sim Lock status: NET: locked, unlock retry counts: 10 NETSUB: unlocked SP: unlocked 2018-09-18 11:19:55.927 Phone info data backup saved to file C:\Users\user\Desktop\NCK Dongle Ultimate Huawei_Setup_v272\Backup\20180918_111955_000000000 00000.BAK 2018-09-18 11:19:59.598 Autodetect COM port and phone type start! 2018-09-18 11:20:02.282 Found COM port: COM4 2018-09-18 11:20:02.288 Found phone type: Huawei Android phone (HiSilicon CPU) 2018-09-18 11:20:02.472 Connecting to server... 2018-09-18 11:20:02.825 Connected! 2018-09-18 11:20:02.833 Open COM port COM4 (Android Adapter PCUI (COM4))... 2018-09-18 11:20:10.720 Waiting for server responce (up to 29 seconds left)... 2018-09-18 11:20:18.833 CP State: ready 2018-09-18 11:20:18.850 Read phone basic info... 2018-09-18 11:20:19.334 Read phone secure info... 2018-09-18 11:20:25.184 Phone info data backup saved to file C:\Users\user\Desktop\NCK Dongle Ultimate Huawei_Setup_v272\Backup\20180918_112025_000000000 00000.BAK 2018-09-18 11:20:25.197 Unlocking start 2018-09-18 11:20:25.208 Phone secure identify start 2018-09-18 11:20:30.234 Waiting for server responce (up to 29 seconds left)... 2018-09-18 11:20:31.871 Phone secure identify success! 2018-09-18 11:20:31.885 Read from server... 2018-09-18 11:20:32.166 Read from server success! 2018-09-18 11:20:35.837 Unlock done!

09-26-2018, 08:38	#6749 (permalink)
thedoc1967 Junior Member Join Date: Aug 2017 Posts: 39 Member: 2752393 Status: Offline Thanks Meter: 9	mOBICEL SWITCH PRIVACY PROTECTION Exe version: NCKBox AndroidMTK 1.8.9.4 Selected model: ELBRUS Action: Reset Privacy Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM20) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (57Gb+4096Mb) KSI 0x454838454134 EMMC FW VERSION: 01:00:00:00:00:00:00:00 EMMC CID: 700100454838454134 : 00000000000000 EMMC UA SIZE: 0x1c8000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1c8c00000 [7.137 GB] -Reading GPT Drive OK Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM Port (COM21) Dumping data, wait. Value found, processing[010c][00460000] Resetting phone. FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x2000000 All done.

09-26-2018, 12:39	#6750 (permalink)
thedoc1967 Junior Member Join Date: Aug 2017 Posts: 39 Member: 2752393 Status: Offline Thanks Meter: 9	Citrus mobile pin reset Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM Port (COM20) Boot mode: Preloader BBCHIP: 6580 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6580 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE EMMC FW VERSION: 43:00:00:00:00:00:00:00 EMMC CID: 8801034E4361726420 : 00000000000000 EMMC UA SIZE: 0x1ce100000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1ced00000 [7.231 GB] -Reading GPT Drive OK Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : MediaTek DA USB VCOM Port (COM21) Detecting format adress....wait! Starting generic userdata format...! Partition: cache begin: 0x97000000 length: 0x19000000 Partition: userdata begin: 0xb0000000 length: 0x11d080000 Phone can start slow at first power on If phone stuck on logo, perform wipe from recovery. First start can take up to 5 min on some phones. Wait untill phone will start charging. All done.

09-16-2018, 12:21	#6737 (permalink)
gunit1 No Life Poster Join Date: Oct 2013 Location: Cote Ivoire ABJ,tvlle, LBJ.23 Age: 39 Posts: 1,647 Member: 2041210 Status: Offline Thanks Meter: 541	Tecno CA7 FRP done

09-17-2018, 11:20	#6738 (permalink)
melotech No Life Poster Join Date: Apr 2010 Location: lagos nigeria Posts: 607 Member: 1278793 Status: Offline Thanks Meter: 68	Virgin VM575 Unlock Done Withe NCK Dongle EXE: NckDongle Spreadtrum Module 0.5 SELECTED : SC6531 ACTION: Unlock. SCENARIO: SC6531. Start Detect phone. Remove the battery and connect handset to PC via USB cable. After long press boot key while inserting the battery. Keep key untill boot complete. Detected: SCI USB2Serial (COM15) Sending loader, keep boot key untill loader start. Loader OK: nckTeam(2016) Beta 0.3 CPU: 6531 FlashId: WINBOND: [0x400000]W25Q32FV Reading Flash Info, wait... Flash Size: $400000 Sector Size: $8000 NVRAM Status: NV_MINVALID_SOK Checking nvram, wait.... Model: 1060X-2BVGGB3J Using mode 1 Writing simlock, wait... Write Done. Backup saved: backup\spd_nvram_backup\SC6531_352273017386340_sav ed_nv_1.bin Total Time: 00:00:20 Done.

09-17-2018, 21:29	#6739 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	HUAWEI G7105 NETWORK LOCK DONE USB Connection selected. EXE VERSION: NCKDongle MTK Tool 1.50 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM13 Phone detected...Please wait Conected ok with target ... Reopen comport(COM13) BaseBand CPU : MT6253, E04 SW_VER : W5.1EG01V01.07 HW_VER : BYD53_10A_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 867874002293496 User code(128) : 1234 SIMLOCK INFO[1]: Block1[N]: Locked (remain:5) Code : 37778617 Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK.

09-17-2018, 21:30	#6740 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	HUAWEI G7105 NETWORK LOCK DONE USB Connection selected. EXE VERSION: NCKDongle MTK Tool 1.50 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM13 Phone detected...Please wait Conected ok with target ... Reopen comport(COM13) BaseBand CPU : MT6253, E04 SW_VER : W5.1EG01V01.07 HW_VER : BYD53_10A_HW Meta mode conected ok, start reading phone.... Phone imei[1] : 867874002293496 User code(128) : 1234 SIMLOCK INFO[1]: Block1[N]: Locked (remain:5) Code : 37778617 Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK.

09-20-2018, 09:18	#6743 (permalink)
sajid01913 No Life Poster Join Date: Jul 2008 Location: Bangladesh Posts: 1,255 Member: 821462 Status: Offline Thanks Meter: 833	FRP Reset Done Detected : MediaTek DA USB VCOM (Android) (COM262) This phone have FRP partition. Build ID: MRA58K Display ID: H400_HW1_V12 Version: 6.0 Build Date: Wed Jul 20 17:54:07 CST 2016 Model: H400 Brand: Symphony Device: H400 Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_pri6735.65u.m0_P17 Exe version: NCKDongle AndroidMTK 2.5.9.2 Selected model: ELBRUS [auto]Action: Reset FRP Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM156) Boot mode: Preloader BBCHIP: 321 0 ca00 Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6735 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (116Gb+16384Mb) SAMSUNG 0x513832334d42 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 150100513832334D42 : 00000000000000 EMMC UA SIZE: 0x3a3e00000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3a4a00000 [14.572 GB] -Reading GPT Drive OK Checking data, wait... Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging.

09-21-2018, 14:37	#6744 (permalink)
ramykhlil2 Junior Member Join Date: Apr 2017 Location: egypt-cairo Posts: 25 Member: 2705961 Status: Offline Sonork: dont have Thanks Meter: 1	hi team can you help me ? i have blackberry STH100-2 he,s set logo stuck i serched but not fund frimware for this phone pleas can u help and thnx

09-25-2018, 18:05	#6747 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	[WORLD 1ST] SERVO A8 FACTORY RESET DONE IN DIAG MODE Action: Reset Phone. Detecting phone, wait... Detected: SPRD DIAG (COM68) Port Opened OK. Platform Version: MOCOR_880XG_MODEM_W13.04_Debug Project Version: sc6820_modem BASE Version: DM_BASE_12A_W13.04 HW Version: sc6820_modem 01-23-2013 11:06:41 IMEI 1: 352291045XXXXXX IMEI 2: 352291045XXXXXX DONE Done.

09-26-2018, 06:04	#6748 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	VIVI 1726 Y85 done. Action : Reset to factory default. Selected Model: 0-By CPU:MT6765 Exe version: NCKDongle AndroidMTK 2.5.9.3 Scanning for presents meta ports... Detected(73) : MediaTek ETS Port (COM73) Start sync target, waiting responce..... ChipID: MT6765,S01 Using Algo 1. Resetting phone step 1, wait.... Resetting phone step 2, wait.... ClearValue ok. FormatTCard ok. All done.