Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 533 - GSM-Forum

Pufi164 · 01-17-2024, 16:35

Asus zenpad P00L FRP OK.-)

Exe version: Nck Box Premium V2 AndroidMTK 1.0
Selected model: Asus ZenPad 10(Z300M)
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(65) : MediaTek PreLoader USB VCOM (Android) (COM65)
[65] \\?\usb#vid_0e8d&pid_2000#5&15fca6d7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Switch preloader to bootrom...
CPU: MT6735(321) sub_code: 8a00 hw_version: ca00 sw_version: 0
crash succeed!
CPU: MT6735 CPU code: 321 Target config: 5
***********************
Secure boot enabled: true
Need serial link authorization: false
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: false
Memory write authorization: false
Cmd 0xC8 blocked: false
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[2da00]Dumping phone preloader.
Preloader: C:\nckbox\android_mtk\Android_MTK_Backup_Folder\pr eloader_backup\preloader_asus8735_tb_301_n.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(110) : MediaTek USB Port (COM110)
[110] \\?\usb#vid_0e8d&pid_0003#5&15fca6d7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 90014A484147346132
Preloader: C:\nckbox\android_mtk\Android_MTK_Backup_Folder\pr eloader_backup\preloader_asus8735_tb_301_n.bin
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Checking data, wait...

Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.

All other tools failed (chimera octop. infin. TFM, EFT. )

Thanks!

gchipangura · 01-22-2024, 07:26

iTel A60S Reset and FRP done

Quote:

Action: Reset Phone.
Detecting phone, wait...
Using connection mode 1
Detected: SPRD U2S Diag (COM5)

Platform Version: MOCORTM_22A_W23.14.5_P1_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_22A_W23.14.5_P1
HW Version: sc9863A_modem
05-10-2023 11:43:26
Build number: A662LM-SR370ABCDEFGIJ-SGo-GL-230516V219
EMMC DDR SIZE :58.00 GB+2.00 GB
UID: e9cf9778d290b7ce72a4e1b403155ff9a75f31f7a91fe3696b 81e77ccfd771b9
AT UID: W+SPGETUID: 581999c5dd0d03809d53a995376807b40129c36e6c9ad2b6eb b9337d79a86484

IMEI 1: 352262321808321
IMEI 2: 352262321808339
IMEI 3: 867400020316638
IMEI 4: 867400020316646
DONE
DONE
DONE
DONE
Done.
Exe version: Unisoc Module 2.2.4

FRP

Quote:

SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM5)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.4

Trapbay · 01-26-2024, 21:31

DIGICEL DL 4S TC UNLOCK DONE...POSSIBLY WORLDS 1ST

Exe version: Nck Box Premium V2 AndroidMTK 1.0
Selected model: 0-By CPU AUTO
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(4) : MediaTek PreLoader USB VCOM (Android) (COM4)
[4] \\?\usb#vid_0e8d&pid_2000#6&1f879cbf&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[6]META Port Detected: MediaTek USB VCOM (Android) (COM6)
USB\VID_0E8D&PID_2007\6&1F879CBF&0&3
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V241.4.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 352513110680457
Phone imei[2] : 357916025680196
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.

iAnell87 · 02-12-2024, 20:00

ALCATEL 2045x NETWORK UNLOCK DONE

USB Connection selected.
Model Selected: 0-By CPU MT6276
EXE VERSION: NCKDongle MTK Tool 1.50
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM35
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM35)
BaseBand CPU : MT6276
SW_VER : 2045X_L4GM_V1.4_150709_CAM30_MCP128_64_FM_BT_Y_CH_ SWISSCOM
HW_VER : HW01
Meta mode conected ok, start reading phone....
Phone imei[1] : 355626063756236
Phone imei[2] : 355626063756236
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

chipscell25 · 02-13-2024, 15:02

FRP BLU G33 G0890UU DONE

SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM41)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.7
Log saved:
C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_41.txt
Total Time: 00:00:40
Done.

chipscell25 · 02-13-2024, 15:36

FRP BLU G33 G0890UU DONE

SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM41)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.7
Log saved:
C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_41.txt
Total Time: 00:00:40
Done.

chipscell25 · 02-13-2024, 18:17

FRP BLU G33 G0890UU DONE

SELECTED: SC9863A
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM41)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
FileSystem: EMMC
Read partition info is supported by loader.
CPU NAME: SC9863A
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.7
Log saved:
C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_41.txt
Total Time: 00:00:40
Done.

Trapbay · 02-13-2024, 23:52

TCLl 30z FRP DONE (4188c)

Exe version: Nck Box Premium V2 AndroidMTK 1.0
Selected model: 0-By CPU AUTO
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(3) : MediaTek USB Port (COM3)
[3] \\?\usb#vid_0e8d&pid_0003#5&105fb9be&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6761 CPU code: 717 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[3ba00]Dumping phone preloader.
Preloader: C:\nckbox\android_mtk\Android_MTK_Backup_Folder\pr eloader_backup\preloader_jettaatt_61.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(3) : MediaTek USB Port (COM3)
[3] \\?\usb#vid_0e8d&pid_0003#5&105fb9be&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6761
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: F4012241524A31 : 000000000000000000
EMMC UA SIZE: 0x748000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748c00000 [29.137 GB]
[EMMC]FORMAT
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

netmobile · 02-18-2024, 16:03

Samsung G780G/DS bit 8, FRP successfully removed.

**Fast Unlocking** · 02-26-2024, 09:54

Tecno Spark 10 Pro

Code:

[Reset FRP]
Waiting for Preloader Port...Found
Port Info	:	MediaTek PreLoader USB VCOM (Android) (COM15) [\\?\usb#vid_0e8d&pid_2000#6&264a8a1b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}]
 	:	MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
 	:	PRELOADER PORT
HW ID	:	MT6768 [0707] Helio P65/G85 k68v1
HW VER	:	8A00,CA00,0000
Sec. Cfg	:	[SBA Active] [SLA Inactive] [DAA Active]
MEID	:	7F0644D1FECF278DA7AEC9369CF20711
SoC ID[0]	:	35B592FA6F944D4614EDE39C0DEDA58B
SoC ID[1]	:	434C1EB3FEAD54A908D10B6D7E7FF035
Sending DA1...Done
Running DA1...Done
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection	:	preloader
Speed	:	high-speed
Running Exploit (Old)...Done
Sending DA2...OK
Activating DA Extension...Done
SRAM	:	0x0000000000070000 [448.00 KB]
DRAM	:	0x0000000100000000 [4.00 GB]
EMMC ID	:	MMC256
EMMC CID	:	D62D004D4D43323536511869EDAB7AB9
BOOT[1]	:	0x0000000000400000 [4.00 MB]
BOOT[2]	:	0x0000000000400000 [4.00 MB]
RPMB	:	0x0000000000400000 [4.00 MB]
USERAREA	:	0x0000003A40A00000 [233.01 GB]
Reading Parititon Info...OK
And. Ver.	:	13
Build Dt.	:	Mon Jul  3 02:41:36 CST 2023
Display ID	:	TECNO-T-64-ARMV82-230701V1863
Ver. Inc.	:	230703V3010
Locale	:	en-US
Patch	:	2023-06-05
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.0]

al-zenjibary · 03-13-2024, 13:55

tecno spark 10 c mdm unlock done!

SELECTED: Tiger T606
ACTION: MDM Unlock
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM42)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] 742607 [5e] 6154292
UID: M2H732_21_5_18
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T606
Found [l_fixnv1_a] [l_fixnv1_a] Size to download: 2 MB
IMEI 1: 35....................
IMEI 2: 35....................
IMEI 3: 86....................
IMEI 4: 86....................
Simlock Type: 4
Reading: prodnv
Reading: miscdata
Reading: l_fixnv1_a
Reading: l_fixnv2_a
Reading: l_fixnv1_b
Reading: l_fixnv2_b
Reading: l_runtimenv1
Reading: l_runtimenv2
Backup saved to: C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\flashmode_security_backup\T606__35... .........._35............._l_fixnv1_a_security_bac kup.tar
Removing lock, wait...
Done.
For some phones need to perform wipe or erase userdata after.
[can take 0-10 sec]Wait untill phone restart.
Exe version: Unisoc Module 2.2.9

netmobile · 03-16-2024, 19:43

Hisense U50 successfully unlocked.

RMESystems · 03-19-2024, 16:22

frp samsung s918b done!

chipscell25 · 03-23-2024, 23:16

UNLOCK DIALN X62 DONE

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU AUTO
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(8) : MediaTek USB Port_V1632 (COM8)
[8] \\?\usb#vid_0e8d&pid_0003#6&7b05479&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[3]META Port Detected: MediaTek USB VCOM (Android) (COM3)
USB\VID_0E8D&PID_200E&MI_01\7&AA0084A&3&0001
Start sync target, waiting responce.....
ChipID: MT6761
[MT6761]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6761
[META]SW_VER : MOLY.LR12A.R3.MP.V249.P6
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 3576966112XXXXX
Phone imei[2] : 112222223333324
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[0]All done.

chipscell25 · 03-23-2024, 23:27

UNLOCK DIALN X62 DONE

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU AUTO
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(8) : MediaTek USB Port_V1632 (COM8)
[8] \\?\usb#vid_0e8d&pid_0003#6&7b05479&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[3]META Port Detected: MediaTek USB VCOM (Android) (COM3)
USB\VID_0E8D&PID_200E&MI_01\7&AA0084A&3&0001
Start sync target, waiting responce.....
ChipID: MT6761
[MT6761]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6761
[META]SW_VER : MOLY.LR12A.R3.MP.V249.P6
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 3576966112XXXXX
Phone imei[2] : 112222223333324
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[0]All done.

02-13-2024, 18:17	#7987 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Frp blu g33 g0890uu done FRP BLU G33 G0890UU DONE SELECTED: SC9863A ACTION: Erase FRP Start Detect phone. Phone must be off(you can service this phone without battery also). Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM41) Sending payload, keep boot key untill loader start. Exploiting phone..... Sending preloader 1 Sending preloader 2 Sending FDL 1..... Sending FDL 2..... New flash metod detected. FileSystem: EMMC Read partition info is supported by loader. CPU NAME: SC9863A Removing frp, wait... [1]FRP: persist Format OK. [can take 0-10 sec]Wait untill phone restart. Exe version: Unisoc Module 2.2.7 Log saved: C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_41.txt Total Time: 00:00:40 Done.

03-23-2024, 23:27	#7995 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	Unlock dialn x62 done UNLOCK DIALN X62 DONE Exe version: NCKBox AndroidMTK 3.0.3 Selected model: 0-By CPU AUTO Action: Unlock Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(8) : MediaTek USB Port_V1632 (COM8) [8] \\?\usb#vid_0e8d&pid_0003#6&7b05479&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [3]META Port Detected: MediaTek USB VCOM (Android) (COM3) USB\VID_0E8D&PID_200E&MI_01\7&AA0084A&3&0001 Start sync target, waiting responce..... ChipID: MT6761 [MT6761]Using Algo 5 Start sync target, waiting responce..... [META]BaseBand CPU : MT6761 [META]SW_VER : MOLY.LR12A.R3.MP.V249.P6 [META]HW_VER : TK_MD_BASIC_HW [helio]Read simlock info. IMEI Location: NVRAM Phone imei[1] : 3576966112XXXXX Phone imei[2] : 112222223333324 Start direct unlock[SIM1] Simlock checksum is ok. Direct unlock done Start direct unlock[SIM2] Simlock checksum is ok. Direct unlock done [0]All done.

01-17-2024, 16:35	#7981 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	Asus zenpad P00L FRP OK.-) Exe version: Nck Box Premium V2 AndroidMTK 1.0 Selected model: Asus ZenPad 10(Z300M) [auto]Action: Reset FRP Phone must be off with battery inside. Battery must be charged Please insert USB cable now... Keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(65) : MediaTek PreLoader USB VCOM (Android) (COM65) [65] \\?\usb#vid_0e8d&pid_2000#5&15fca6d7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Switch preloader to bootrom... CPU: MT6735(321) sub_code: 8a00 hw_version: ca00 sw_version: 0 crash succeed! CPU: MT6735 CPU code: 321 Target config: 5 ********************* Secure boot enabled: true Need serial link authorization: false Need download agent authorization: true SWJTAG enabled: true EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false Root cert required: false Memory read authorization: false Memory write authorization: false Cmd 0xC8 blocked: false ********************* Executing exploit, do not disconnect phone Exploit has been executed successfully. [2da00]Dumping phone preloader. Preloader: C:\nckbox\android_mtk\Android_MTK_Backup_Folder\pr eloader_backup\preloader_asus8735_tb_301_n.bin Waiting for handle to become active...... Reseived active handle repply from phone...... Booting phone Detected(110) : MediaTek USB Port (COM110) [110] \\?\usb#vid_0e8d&pid_0003#5&15fca6d7&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Boot mode: Brom BBCHIP: 321 0 ca00 Using Algo 2. Phone detected...Please wait Sending DA agent, please wait... [emmi]EMMC CID: 90014A484147346132 Preloader: C:\nckbox\android_mtk\Android_MTK_Backup_Folder\pr eloader_backup\preloader_asus8735_tb_301_n.bin ---------------------------------------------------- BaseBand CPU :MT6737T BaseBand CPU Secure Version : 05 BaseBand CPU Bootloader Version : FE ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (117Gb+16384Mb) HYNIX 0x484147346132 EMMC FW VERSION: a5:00:00:00:00:00:00:00 EMMC CID: 90014A484147346132 : 00000000000000 EMMC UA SIZE: 0x3ab400000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x3ac000000 [14.688 GB] Checking data, wait... Writing FRP, wait... FRP Reset Done. Wait untill phone will start charging. [0]All done. All other tools failed (chimera octop. infin. TFM, EFT. ) Thanks!

01-26-2024, 21:31	#7983 (permalink)
Trapbay Freak Poster Join Date: Nov 2018 Location: Everywhere Your Not Posts: 499 Member: 2875052 Status: Offline Thanks Meter: 211	DIGICEL DL 4S TC UNLOCK DONE...POSSIBLY WORLDS 1ST Exe version: Nck Box Premium V2 AndroidMTK 1.0 Selected model: 0-By CPU AUTO Action: Unlock Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(4) : MediaTek PreLoader USB VCOM (Android) (COM4) [4] \\?\usb#vid_0e8d&pid_2000#6&1f879cbf&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [6]META Port Detected: MediaTek USB VCOM (Android) (COM6) USB\VID_0E8D&PID_2007\6&1F879CBF&0&3 Start sync target, waiting responce..... ChipID: MT6739 [MT6739]Using Algo 5 Start sync target, waiting responce..... [META]BaseBand CPU : MT6739 [META]SW_VER : MOLY.LR12A.R3.MP.V241.4.P2 [META]HW_VER : TK_MD_BASIC_HW [helio]Read simlock info. IMEI Location: NVRAM Phone imei[1] : 352513110680457 Phone imei[2] : 357916025680196 Start direct unlock[SIM1] Simlock checksum is ok. Direct unlock done Start direct unlock[SIM2] Simlock checksum is ok. Direct unlock done Simlock checksum is ok. Direct unlock done Simlock checksum is ok. Direct unlock done [0]All done.

02-12-2024, 20:00	#7984 (permalink)
iAnell87 No Life Poster Join Date: Feb 2016 Location: BA Posts: 503 Member: 2531176 Status: Offline Thanks Meter: 225	ALCATEL 2045x NETWORK UNLOCK DONE USB Connection selected. Model Selected: 0-By CPU MT6276 EXE VERSION: NCKDongle MTK Tool 1.50 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM35 Phone detected...Please wait Conected ok with target ... Reopen comport(COM35) BaseBand CPU : MT6276 SW_VER : 2045X_L4GM_V1.4_150709_CAM30_MCP128_64_FM_BT_Y_CH_ SWISSCOM HW_VER : HW01 Meta mode conected ok, start reading phone.... Phone imei[1] : 355626063756236 Phone imei[2] : 355626063756236 UNLOCK SIM[1]: Unlock ok sim[1] SIMLOCK INFO[1]: Block1[N]: Unlocked Block2[NS]: Unlocked Block3[SP] Unlocked Block4[C]: Unlocked META END OK. All done.

02-13-2024, 15:02	#7985 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	FRP BLU G33 G0890UU DONE SELECTED: SC9863A ACTION: Erase FRP Start Detect phone. Phone must be off(you can service this phone without battery also). Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM41) Sending payload, keep boot key untill loader start. Exploiting phone..... Sending preloader 1 Sending preloader 2 Sending FDL 1..... Sending FDL 2..... New flash metod detected. FileSystem: EMMC Read partition info is supported by loader. CPU NAME: SC9863A Removing frp, wait... [1]FRP: persist Format OK. [can take 0-10 sec]Wait untill phone restart. Exe version: Unisoc Module 2.2.7 Log saved: C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_41.txt Total Time: 00:00:40 Done.

02-13-2024, 15:36	#7986 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	FRP BLU G33 G0890UU DONE SELECTED: SC9863A ACTION: Erase FRP Start Detect phone. Phone must be off(you can service this phone without battery also). Long press "VOL -"+ "VOL +" key while inserting usb cable. Keep key untill boot complete. Detected: SPRD U2S Diag (COM41) Sending payload, keep boot key untill loader start. Exploiting phone..... Sending preloader 1 Sending preloader 2 Sending FDL 1..... Sending FDL 2..... New flash metod detected. FileSystem: EMMC Read partition info is supported by loader. CPU NAME: SC9863A Removing frp, wait... [1]FRP: persist Format OK. [can take 0-10 sec]Wait untill phone restart. Exe version: Unisoc Module 2.2.7 Log saved: C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\Saved_Logs\_erase_frp_41.txt Total Time: 00:00:40 Done.

02-13-2024, 23:52	#7988 (permalink)
Trapbay Freak Poster Join Date: Nov 2018 Location: Everywhere Your Not Posts: 499 Member: 2875052 Status: Offline Thanks Meter: 211	TCLl 30z FRP DONE (4188c) Exe version: Nck Box Premium V2 AndroidMTK 1.0 Selected model: 0-By CPU AUTO [auto]Action: Reset FRP Phone must be off with battery inside. Battery must be charged Please insert USB cable now... Keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(3) : MediaTek USB Port (COM3) [3] \\?\usb#vid_0e8d&pid_0003#5&105fb9be&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} CPU: MT6761 CPU code: 717 Target config: e7 ********************* Secure boot enabled: true Need serial link authorization: true Need download agent authorization: true SWJTAG enabled: true EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false Root cert required: false Memory read authorization: true Memory write authorization: true Cmd 0xC8 blocked: true ********************* Executing exploit, do not disconnect phone Exploit has been executed successfully. [3ba00]Dumping phone preloader. Preloader: C:\nckbox\android_mtk\Android_MTK_Backup_Folder\pr eloader_backup\preloader_jettaatt_61.bin Waiting for handle to become active...... Reseived active handle repply from phone...... Booting phone Detected(3) : MediaTek USB Port (COM3) [3] \\?\usb#vid_0e8d&pid_0003#5&105fb9be&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Boot mode: Brom Phone detected...Please wait BBCHIP: 6761 200 ca01 Using Algo 1. Helio MT6761 phone detected, swithing to helio api Helio enabled DRAM in First Da: FALSE Sending loader..... BBCHIP MT6761 [1]Storage EMMC Block size: 512 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: F4012241524A31 : 000000000000000000 EMMC UA SIZE: 0x748000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x748c00000 [29.137 GB] [EMMC]FORMAT [0]FRP Reset Done. [helio]Wait untill phone will start charging. [0]All done.

02-18-2024, 16:03	#7989 (permalink)
netmobile No Life Poster Join Date: Apr 2008 Location: Central America Posts: 1,112 Member: 746276 Status: Offline Sonork: 100.1609752 Thanks Meter: 675	Samsung G780G/DS bit 8, FRP successfully removed.

03-13-2024, 13:55	#7991 (permalink)
al-zenjibary Junior Member Join Date: Sep 2006 Location: EARTH Posts: 23 Member: 342126 Status: Offline Thanks Meter: 5	tecno spark 10 c mdm unlock done! SELECTED: Tiger T606 ACTION: MDM Unlock Start Detect phone... Phone must be off with battery inside. Long press "VOL -" key and insert usb cable. For some phones need to Long press "VOL -"+ "VOL +" key and insert usb cable. Detected: SPRD U2S Diag (COM42) Sending payload, keep boot key untill loader start. Exploiting phone..... Sending preloader 1 Sending preloader 2 Sending FDL 1..... Sending FDL 2..... New flash metod detected. [5f] 742607 [5e] 6154292 UID: M2H732_21_5_18 FileSystem: UFS Read partition info is supported by loader. CPU NAME: T606 Found [l_fixnv1_a] [l_fixnv1_a] Size to download: 2 MB IMEI 1: 35.................... IMEI 2: 35.................... IMEI 3: 86.................... IMEI 4: 86.................... Simlock Type: 4 Reading: prodnv Reading: miscdata Reading: l_fixnv1_a Reading: l_fixnv2_a Reading: l_fixnv1_b Reading: l_fixnv2_b Reading: l_runtimenv1 Reading: l_runtimenv2 Backup saved to: C:\nckdongle\spreadtrum_module\spreadtrum_module_b ackup_folder\flashmode_security_backup\T606__35... .........._35............._l_fixnv1_a_security_bac kup.tar Removing lock, wait... Done. For some phones need to perform wipe or erase userdata after. [can take 0-10 sec]Wait untill phone restart. Exe version: Unisoc Module 2.2.9

03-16-2024, 19:43	#7992 (permalink)
netmobile No Life Poster Join Date: Apr 2008 Location: Central America Posts: 1,112 Member: 746276 Status: Offline Sonork: 100.1609752 Thanks Meter: 675	Hisense U50 successfully unlocked.

03-19-2024, 16:22	#7993 (permalink)
RMESystems Freak Poster Join Date: Mar 2020 Location: bolivia Posts: 263 Member: 2951556 Status: Offline Thanks Meter: 243	frp samsung s918b done!

03-23-2024, 23:16	#7994 (permalink)
chipscell25 No Life Poster Join Date: Mar 2011 Location: dominican republic Age: 45 Posts: 2,101 Member: 1537078 Status: Offline Sonork: celular center Thanks Meter: 573	UNLOCK DIALN X62 DONE Exe version: NCKBox AndroidMTK 3.0.3 Selected model: 0-By CPU AUTO Action: Unlock Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(8) : MediaTek USB Port_V1632 (COM8) [8] \\?\usb#vid_0e8d&pid_0003#6&7b05479&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [3]META Port Detected: MediaTek USB VCOM (Android) (COM3) USB\VID_0E8D&PID_200E&MI_01\7&AA0084A&3&0001 Start sync target, waiting responce..... ChipID: MT6761 [MT6761]Using Algo 5 Start sync target, waiting responce..... [META]BaseBand CPU : MT6761 [META]SW_VER : MOLY.LR12A.R3.MP.V249.P6 [META]HW_VER : TK_MD_BASIC_HW [helio]Read simlock info. IMEI Location: NVRAM Phone imei[1] : 3576966112XXXXX Phone imei[2] : 112222223333324 Start direct unlock[SIM1] Simlock checksum is ok. Direct unlock done Start direct unlock[SIM2] Simlock checksum is ok. Direct unlock done [0]All done.