Tablet G-1031-S (MT8163) Dead

[Vero]

I have a tablet G1031-S (MT8163) to remove the lock code, I did a full firmware backup, and by mistake I deleted all flash, but now I can't load the firmware backup.

What's the problem?

I attach the log:

Flash files count is :11
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.7.1
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
Boot mode: Preloader
BBCHIP: 8163 1 cb00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT8163
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 256 KB SDRAM
EXT RAM: 3 GB DRAM
----------------------------------------------------
EMMC: (233Gb+24576Mb) HYNIX 0x68423861503e
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A68423861503E : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM13)
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
[3]Error: ??
Wait untill phone will start charging.
[0]All done.

9/04/20 13:48:01.033 BROM_DLL[9340][6840]: NEW_PART[24](flashinfo ) - offset (0x00000000FFFF0084) - size (0x0000000001000000) - mask (0x0000000000000000) (da_cmd.cpp:4376)
09/04/20 13:48:01.033 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_WritePartitionInfo(): send DA_WRITE_PARTITION_CMD(0xA4). (da_cmd.cpp:4387)
09/04/20 13:48:01.033 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_WritePartitionInfo(): wait for command allowance check ... (da_cmd.cpp:4393)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: ERROR: DA_cmd::ReadData(): Retry(92): ReadComm(0/1): exceed timeout 10000 ms, retry 92 times fail!, total=(0/1). (da_cmd.cpp:272)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: ERROR: FlashTool_Download_Internal(): Update mirror PT failed, ret(3)! (flashtool_api.cpp:3742)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_Download(): DL_HANDLE->rwlock: READ_UNLOCK. (rwlock.cpp:423)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_Download(): DL_HANDLE_LIST->rwlock: READ_UNLOCK. (rwlock.cpp:423)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_Download(0x0CDD2818): mutex: UNLOCK. (mutex.cpp:158)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: ERROR: FlashTool_Download(): <ERR_CHECKPOINT>[121][error][3]</ERR_CHECKPOINT> [??] (flashtool_api.cpp:4211)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: CLockAllImageFiles::~CLockAllImageFiles(): Unlock All bin images file after DL stage (flashtool_api.cpp:3895)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_EnableWatchDogTimeout(0x0CDD2818): mutex: LOCK ... (mutex.cpp:143)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_EnableWatchDogTimeout(0x0CDD2818): enable watch dog, timeout interval is 1000 ms. (flashtool_api.cpp:2870)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: FlashTool_EnableWatchDogTimeout_Internal(): flags(0x3), m_dlbit(0), m_async(1), m_reboot(1),m_bNotResetRTCTime(0). (flashtool_api.cpp:2875)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_EnableWatchDog(): send DA_ENABLE_WATCHDOG_CMD(0xDB). (da_cmd.cpp:3387)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_EnableWatchDog(): send TIMEOUT_INTERVAL(0x0040)=1000/15.6 ms. (da_cmd.cpp:3396)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_EnableWatchDog(): send flags(3) (da_cmd.cpp:3401)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_EnableWatchDog(): wait for ack. (da_cmd.cpp:3407)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_EnableWatchDog(): OK. (da_cmd.cpp:3419)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_EnableWatchDogTimeout(0x0CDD2818): OK. (flashtool_api.cpp:2895)
09/04/20 13:48:11.119 BROM_DLL[9340][6840]: FlashTool_EnableWatchDogTimeout(0x0CDD2818): mutex: UNLOCK. (mutex.cpp:158)
09/04/20 13:48:11.244 BROM_DLL[9340][6840]: FlashTool_Disconnect(0x0CDD2818): mutex: LOCK ... (mutex.cpp:143)
09/04/20 13:48:11.244 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_Finish(): Send DA_FINISH_CMD(0xD9), device_status(DISCONNECT_USB_AND_RELEASE_POWERKEY) . (da_cmd.cpp:1050)
09/04/20 13:48:11.259 BROM_DLL[9340][6840]: DEBUG: DA_cmd::CMD_Finish(): OK! (da_cmd.cpp:1090)
09/04/20 13:48:11.259 BROM_DLL[9340][6840]: FlashTool_Disconnect(0x0CDD2818): mutex: UNLOCK. (mutex.cpp:158)
09/04/20 13:48:11.275 BROM_DLL[9340][6840]: com_sentry::Close(\\.\COM13, 00002A9C): OK! (com_sentry.cpp:663)
09/04/20 13:48:11.275 BROM_DLL[9340][6840]: com_base::~com_base() m_hCOM(FFFFFFFF) (com_sentry.cpp:122)
09/04/20 13:48:11.275 BROM_DLL[9340][6840]: DEBUG: FlashTool_Disconnect(): successfully done. (flashtool_api.cpp:2359)

[Vero]

Please, I need help with my problem

[orbita]

Originally Posted by Vero

Please, I need help with my problem

Posting smart part from debug log, posible even not related with flashing opperation, will not help to see where is problem.
You must upload full debug logtaken on write firmware.
Also, just a question, if you erased whole firmware, why you use safe flash?