Error 0101 in DIV - GSM-Forum

bryankim815 · 02-25-2004, 06:49

What des error code 0101 mean?

SFlood · 02-25-2004, 10:32

no phone detected at all - 1st boot step failed

Rise · 02-25-2004, 10:58

clean ur charging jeck
and then connect

Regard
rise

Lawa2000 · 02-25-2004, 11:42

Make sure battery is fully charged - that solved my 0101 error.

muppet · 02-25-2004, 20:08

Also if you keep getting 0101, check your LPT settings are correct and try lowering the baud rate.

abdoulaye · 02-25-2004, 20:15

verify connection phone

bryankim815 · 02-26-2004, 00:35

It appears that it does not unlock anything anymore. Could it be that my dongle is broken? What parallel port settings are you using?

plasticmagnet · 03-05-2004, 14:09

Quote:

Originally Posted by bryankim815

It appears that it does not unlock anything anymore. Could it be that my dongle is broken? What parallel port settings are you using?

It's likely the phone and not the dongle. I have 2 T68i's... one gives me error 0101, the other allows me to read the codes.

As for the pc settings, as long as Div software turns on and recognizes the dongle, then you have no problem otherwise, play around with the IRQ settings in your GUI OS as well as in BIOS..... I got this info from another site... but I bet it's here too. I can find the details if you PM me.

bryankim815 · 03-05-2004, 18:58

I upgraded to DIV 8.4 and that solved the problem. But now my laptop won't recognize the dongle.

02-25-2004, 06:49	#1 (permalink)
bryankim815 Junior Member Join Date: Jun 2003 Posts: 38 Member: 30850 Status: Offline Thanks Meter: 2	Error 0101 in DIV What des error code 0101 mean?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have getting error 3608 in DIV while flashing the ARM	kingofhearts	Sony Ericsson	15	10-16-2004 11:38
Error 201 error 301 in DIV Plz HELP!!!!	Shubhanshu~	DIV	2	07-09-2004 21:37
Div error 0101 before you give up and buy Fighter	pda700	Sony Ericsson	2	04-28-2004 15:39
error 0301 in div dongle	garcea10ro	Sony Ericsson	1	03-04-2004 18:24
Error Codes In Div	mumien	Sony Ericsson	1	12-31-2003 00:33

02-25-2004, 10:32	#2 (permalink)
SFlood No Life Poster Join Date: May 1999 Location: RU Posts: 906 Member: 83 Status: Offline Thanks Meter: 1	no phone detected at all - 1st boot step failed

02-25-2004, 10:58	#3 (permalink)
Rise No Life Poster Join Date: Sep 2003 Location: Dubai Posts: 1,402 Member: 39022 Status: Offline Sonork: 1575244 Thanks Meter: 94	clean ur charging jeck and then connect Regard rise

02-25-2004, 11:42	#4 (permalink)
Lawa2000 Crazy Poster Join Date: Aug 2002 Posts: 52 Member: 14870 Status: Offline Thanks Meter: 0	Make sure battery is fully charged - that solved my 0101 error.

02-25-2004, 20:08	#5 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	Also if you keep getting 0101, check your LPT settings are correct and try lowering the baud rate.

02-25-2004, 20:15	#6 (permalink)
abdoulaye No Life Poster Join Date: Oct 2003 Location: senegal (dakar)mali/guinee/mauritanie[KANDJI ET FRERES] Age: 42 Posts: 1,057 Member: 41375 Status: Offline Thanks Meter: 7	verify connection phone

02-26-2004, 00:35	#7 (permalink)
bryankim815 Junior Member Join Date: Jun 2003 Posts: 38 Member: 30850 Status: Offline Thanks Meter: 2	It appears that it does not unlock anything anymore. Could it be that my dongle is broken? What parallel port settings are you using?

03-05-2004, 18:58	#9 (permalink)
bryankim815 Junior Member Join Date: Jun 2003 Posts: 38 Member: 30850 Status: Offline Thanks Meter: 2	I upgraded to DIV 8.4 and that solved the problem. But now my laptop won't recognize the dongle.