Post your software problems here - Page 5 - GSM-Forum

.::Unlocker.:: · 03-31-2006, 09:31

Customize FS in cruiser.
tested on many phones.
and works

Hicky · 03-31-2006, 11:01

My dead Z800 revived, flashed erom fix, reflashed main+fs+completed phone...It's now working like a charm...

Without branding...

H4xOr · 03-31-2006, 15:00

Quote:

Originally Posted by .::Unlocker.::

cruiser cable can do the job

Where do I get hold of that and software? I live in Denmark? Have only been able to find Cruiser Pro 2..

nokiaireland · 03-31-2006, 20:27

hi
i have a 6230 that i think needs flashing. when it is switched on, while booting it switches off within 6 seconds. i have a ufs3 flasher and when i flash it using:mcu:rh_12_28_11005_.400 & ppm:rh_12_28_11005_.400a. this happens:

1st Boot Ok, TIKU, UPP: 1052
Fl0: 0x00000000-0x00FFFFFF,00EC22F8,Sam K8S2815ET
Fl1: 0x02000000-0x027FFFFF,00EC0039,Sam KEE00E00CM
Algorithm: te_amd_b.fia
Algorithm Ok, MSID: 84D28C69F97FF19871824854DE
Decoded MSID: 2A55BAE9-0057C09D-A8000000
Encoded FAID: 8FB335A0-8259C9AE-51FF6DA4
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erasure Skipped
Area3: 0x00800000-0x0093FFFF Erasure Skipped
Area4: 0x00B60000-0x00FEFFFF Erasure Skipped
Write Error: hDat 14, at: 0x00010000:08
Process Failed, Repowering Mobile

iam a real newbie at this any ideas? thanks for your time and thanks in advance!

.::Unlocker.:: · 04-01-2006, 03:28

Quote:

Originally Posted by nokiaireland

hi
i have a 6230 that i think needs flashing. when it is switched on, while booting it switches off within 6 seconds. i have a ufs3 flasher and when i flash it using:mcu:rh_12_28_11005_.400 & ppm:rh_12_28_11005_.400a. this happens:

1st Boot Ok, TIKU, UPP: 1052
Fl0: 0x00000000-0x00FFFFFF,00EC22F8,Sam K8S2815ET
Fl1: 0x02000000-0x027FFFFF,00EC0039,Sam KEE00E00CM
Algorithm: te_amd_b.fia
Algorithm Ok, MSID: 84D28C69F97FF19871824854DE
Decoded MSID: 2A55BAE9-0057C09D-A8000000
Encoded FAID: 8FB335A0-8259C9AE-51FF6DA4
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erasure Skipped
Area3: 0x00800000-0x0093FFFF Erasure Skipped
Area4: 0x00B60000-0x00FEFFFF Erasure Skipped
Write Error: hDat 14, at: 0x00010000:08
Process Failed, Repowering Mobile

iam a real newbie at this any ideas? thanks for your time and thanks in advance!

this is sony-ericsson section.
not the section for nokia...

diljo · 04-03-2006, 11:05

How many CIDv for k700i? I have heared about CID 16,29, have any other CID's ? Hav any importance 2 CID versions in unlocking through UFS HWK,USB smart,SONICS? I saw some post regarding k700i dead during unlocking.Now I hav a Sony Ericsson k700i version 29 for unlock.I hav UFS HWK , USB Smart & SONICS .In it, which one is better 2 unlock my k700i(Without any side effects).

.::Unlocker.:: · 04-03-2006, 14:25

@diljo

cruiser is the best!

Platijet · 04-03-2006, 16:21

sorry but we have to close that thread.similar reasons like this: http://forum.gsmhosting.com/vbb/show...&postcount=519

03-31-2006, 20:27	#64 (permalink)
nokiaireland Junior Member Join Date: Mar 2006 Posts: 7 Member: 252011 Status: Offline Thanks Meter: 0	help flashing 6230 please hi i have a 6230 that i think needs flashing. when it is switched on, while booting it switches off within 6 seconds. i have a ufs3 flasher and when i flash it using:mcu:rh_12_28_11005_.400 & ppm:rh_12_28_11005_.400a. this happens: 1st Boot Ok, TIKU, UPP: 1052 Fl0: 0x00000000-0x00FFFFFF,00EC22F8,Sam K8S2815ET Fl1: 0x02000000-0x027FFFFF,00EC0039,Sam KEE00E00CM Algorithm: te_amd_b.fia Algorithm Ok, MSID: 84D28C69F97FF19871824854DE Decoded MSID: 2A55BAE9-0057C09D-A8000000 Encoded FAID: 8FB335A0-8259C9AE-51FF6DA4 Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area2: 0x00010000-0x007FFFFF Erasure Skipped Area3: 0x00800000-0x0093FFFF Erasure Skipped Area4: 0x00B60000-0x00FEFFFF Erasure Skipped Write Error: hDat 14, at: 0x00010000:08 Process Failed, Repowering Mobile iam a real newbie at this any ideas? thanks for your time and thanks in advance!

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
post all nokia software problem here, i will try to solved.	shahinahmed007	Nokia Base Band 5 ( BB-5 )	145	11-04-2016 15:50
Post me your BB5 problem here.. Ill try to help with Pict	Rizal Arsyad Dini	Nokia Hardware & Hardware Repair	13	10-05-2014 09:23
for morocan users post your box problem here	div_859	FuriousGold	2	06-04-2009 07:52

03-31-2006, 09:31	#61 (permalink)
.::Unlocker.:: Banned Join Date: Oct 2005 Location: inside forum Posts: 746 Member: 193336 Status: Offline Thanks Meter: 9	Customize FS in cruiser. tested on many phones. and works

03-31-2006, 11:01	#62 (permalink)
Hicky Freak Poster Join Date: Mar 2006 Posts: 175 Member: 248030 Status: Offline Thanks Meter: 29	My dead Z800 revived, flashed erom fix, reflashed main+fs+completed phone...It's now working like a charm... Without branding...

04-03-2006, 11:05	#66 (permalink)
diljo Junior Member Join Date: Mar 2006 Posts: 14 Member: 243902 Status: Offline Thanks Meter: 0	How many CIDv for k700i? I have heared about CID 16,29, have any other CID's ? Hav any importance 2 CID versions in unlocking through UFS HWK,USB smart,SONICS? I saw some post regarding k700i dead during unlocking.Now I hav a Sony Ericsson k700i version 29 for unlock.I hav UFS HWK , USB Smart & SONICS .In it, which one is better 2 unlock my k700i(Without any side effects).

04-03-2006, 14:25	#67 (permalink)
.::Unlocker.:: Banned Join Date: Oct 2005 Location: inside forum Posts: 746 Member: 193336 Status: Offline Thanks Meter: 9	@diljo cruiser is the best!

04-03-2006, 16:21	#68 (permalink)
Platijet No Life Poster Join Date: Apr 2003 Location: Greece Age: 47 Posts: 3,358 Member: 26279 Status: Offline Thanks Meter: 274	sorry but we have to close that thread.similar reasons like this: http://forum.gsmhosting.com/vbb/show...&postcount=519