t65 no calls after unlock with div 6.2 - GSM-Forum

dimon · 04-15-2003, 21:44

Transmitter is working: sos calls without sim card are ok. But with sim phone registers to network, and no calls outgoing, ingoing.
What is wrong?

dimon · 04-16-2003, 14:49

any ideas?

Chuk · 04-16-2003, 15:17

Try to reset (full clear) phone from menu. If not helps, reflash phone (AVR and ARM)

Chuk · 04-16-2003, 15:22

dimon · 04-16-2003, 15:56

tried reseting, flashing, writing gdfs - no way

vule · 04-16-2003, 16:21

Hiya

Check IMEI....
Reset GDFS, check for call barrings, etc

BR

Vule

dimon · 04-16-2003, 16:57

IMEI is good, no barrings are active, but 'sending own number, id' in calls menu inactive, in our network sending caller id must be on, otherwise no outgoing calls

vule · 04-16-2003, 21:15

Hiya

Same with network here....ID must be on or default by network...

What about incoming calls??? Can receive any???

BR

Vule

dimon · 04-16-2003, 22:06

can not change sending Id - this function is inactive
can not recieve any call

dimon · 04-17-2003, 22:25

04-17-2003, 23:22

<0000>

dimon · 04-18-2003, 08:45

Reset telephone

*#0000#
did not work

dimon · 04-18-2003, 20:08

may be problem with eeprom, can it be fixed?

04-15-2003, 21:44	#1 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	t65 no calls after unlock with div 6.2 Transmitter is working: sos calls without sim card are ok. But with sim phone registers to network, and no calls outgoing, ingoing. What is wrong?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T630 r7c no network after unlock with Div	Format1	DIV	8	05-07-2005 19:22
Unlocking P800s with Div 6.2 cracked	gazt	Sony Ericsson	1	08-11-2003 03:11
T200 no network after unlock with DIV 6.2	Falck	Sony Ericsson	0	06-18-2003 20:05
WARNING!!! T65 ver. R7A007 Dead after Flashing with DIV 6.2	balivo	Sony Ericsson	4	04-07-2003 09:14
sagem no call after unlock with calculator	makgsm	Sagem Hardware Repair Area	3	09-25-2001 20:42

04-16-2003, 14:49	#2 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	any ideas?

04-16-2003, 15:17	#3 (permalink)
Chuk No Life Poster Join Date: Dec 2001 Location: Ukraine Age: 46 Posts: 1,146 Member: 7767 Status: Offline Thanks Meter: 3	Try to reset (full clear) phone from menu. If not helps, reflash phone (AVR and ARM)

04-16-2003, 15:22	#4 (permalink)
Chuk No Life Poster Join Date: Dec 2001 Location: Ukraine Age: 46 Posts: 1,146 Member: 7767 Status: Offline Thanks Meter: 3

04-16-2003, 15:56	#5 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	tried reseting, flashing, writing gdfs - no way

04-16-2003, 16:21	#6 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	Hiya Check IMEI.... Reset GDFS, check for call barrings, etc BR Vule

04-16-2003, 16:57	#7 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	IMEI is good, no barrings are active, but 'sending own number, id' in calls menu inactive, in our network sending caller id must be on, otherwise no outgoing calls

04-16-2003, 21:15	#8 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	Hiya Same with network here....ID must be on or default by network... What about incoming calls??? Can receive any??? BR Vule

04-16-2003, 22:06	#9 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	can not change sending Id - this function is inactive can not recieve any call

04-17-2003, 22:25	#10 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51

04-17-2003, 23:22	#11 (permalink)
legija Guest Posts: n/a Member:	<0000>

04-18-2003, 08:45	#12 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	Reset telephone *#0000# did not work

04-18-2003, 20:08	#13 (permalink)
dimon Freak Poster Join Date: Nov 2001 Location: oi Posts: 481 Member: 7368 Status: Offline Thanks Meter: 51	may be problem with eeprom, can it be fixed?