n7100 writing filed with odin after repair [Answered] - GSM-Forum

syrmic · 02-10-2014, 18:53

hi team
i have n7100 dead boot and i used isp and writ full dump -boot1-boot2
this my log

1- with full dump
Writing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.39 0.02 0.62 0.33 0.00 0.00
Power ON : 2.62 1.77 2.54 1.00 1.72 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056335730304D003BA7604AA0
eMMC CSD: D02701320F5903FFF6DBFFEF8E4040
ID check: 00010015
Product name: V3W00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x400000 ( 4.0M )
RPMB partition size: 0x80000 ( 0.5M )
ID check...OK!
Erase chip...Boot1
Erase chip: 0.42 sec.
Write chip...Boot1
Write chip: 1.89 sec.
Verify chip...Boot1
Verify chip: 0.88 sec.
Erase chip...Boot2
Erase chip: 0.41 sec.
Write chip...Boot2
Write chip: 1.75 sec.
Verify chip...Boot2
Verify chip: 0.86 sec.
Erase chip...User
Erase chip: 4.64 sec.
Write chip...User
Write chip: 12219.50 sec.
Verify chip...User
Verify chip: 2836.16 sec.
Write chip success. time:15067.05 sec.
2- with only boot
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.21 0.02 0.01 0.33 0.00 0.00
Power ON : 2.62 1.78 2.54 1.00 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056335730304D003BA7604AA0
eMMC CSD: D02701320F5903FFF6DBFFEF8E4040
ID check: 00010015
Product name: V3W00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x400000 ( 4.0M )
RPMB partition size: 0x80000 ( 0.5M )
ID check...OK!
ID check success. time:0.77 sec.
Erasing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.18 0.02 0.01 0.33 0.00 0.00
Power ON : 2.62 1.77 2.54 1.00 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: E2A0200AC66AE60609A00774EC0954
eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901
ID check: 20A000E2
Product name: __j___
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x400000 ( 4.0M )
RPMB partition size: 0x80000 ( 0.5M )
ID check...OK!
Erase chip...Boot1
Erase chip...Boot2
Erase chip...User
Erase chip success. time:5.64 sec.
Writing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.23 0.01 0.01 0.33 0.00 0.00
Power ON : 2.62 1.77 2.54 1.00 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: E2A0200AC66AE60609A00774EC0954
eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901
ID check: 20A000E2
Product name: __j___
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x400000 ( 4.0M )
RPMB partition size: 0x80000 ( 0.5M )
ID check...OK!
Erase chip...Boot1
Erase chip: 0.42 sec.
Write chip...Boot1
Write chip: 1.55 sec.
Verify chip...Boot1
Verify chip: 0.78 sec.
>>Write chip success. time:2.92 sec.
now my phone detected with Odin but-filed on boot bin

syrmic · 02-10-2014, 19:03

now my phone is totaly dead after boor repair with Samsung_N7100_GPG_New_(The_number_of_mobile_phone) \Samsung_N7100_GPG(The_number_of_mobile_phone ).boot1

akashub · 02-11-2014, 06:19

Quote:

Originally Posted by syrmic

now my phone is totaly dead after boor repair with Samsung_N7100_GPG_New_(The_number_of_mobile_phone) \Samsung_N7100_GPG(The_number_of_mobile_phone ).boot1

Hi what was the problem before u write this files?

and where is logs and screen shoot pls post here so we can try to help u

wbr
akashub

syrmic · 02-11-2014, 11:31

thanks sir for reply
handset came completly dead i write boot1 and boot2 then detected with odin
but failed at boot writing via odin
also i tried full dump but my phone completly dead
my logs in first post sir
i want to ask one question i have nother phone working ok can i dump boot then write to phone or shoud make full dump????

xDiRECT · 02-11-2014, 11:52

Quote:

Originally Posted by syrmic

thanks sir for reply
handset came completly dead i write boot1 and boot2 then detected with odin
but failed at boot writing via odin
also i tried full dump but my phone completly dead
my logs in first post sir
i want to ask one question i have nother phone working ok can i dump boot then write to phone or shoud make full dump????

yes you can dump boot only from a working phone or make full dump.

swechacnu · 02-11-2014, 12:02

Quote:

Originally Posted by syrmic

thanks sir for reply
handset came completly dead i write boot1 and boot2 then detected with odin
but failed at boot writing via odin
also i tried full dump but my phone completly dead
my logs in first post sir
i want to ask one question i have nother phone working ok can i dump boot then write to phone or shoud make full dump????

Hi,

Check the link, u need follow this process i have done 2 n7100 no product name and sudden died mobiles with this process...

http://forum.gsmhosting.com/vbb/9927638-post14.html

BR,
Srinivas Reddy.

syrmic · 02-11-2014, 12:10

thanks sir i will try but i am confused about Boot partition size
for example i have boot partition size is 4m
and i see on video boot size is 2m
can you explain deference between both
thank for your patient

swechacnu · 02-11-2014, 12:44

Quote:

Originally Posted by syrmic

thanks sir i will try but i am confused about Boot partition size
for example i have boot partition size is 4m
and i see on video boot size is 2m
can you explain deference between both
thank for your patient

Hi,
This video only for test and process how to do, u use any of data size no need to correct size just for boot files if u want 4mb to 8mb u can choose no problem.
which size u want select that size. but first u try recover from dead then write full dump from download from support site, after give here screenshot and logs, best of luck.

BR,
Srinivas Reddy.

syrmic · 02-11-2014, 21:16

hi sir
1st check my log
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.16 0.00 0.01 1.39 0.00 0.00
Power ON : 2.62 1.77 2.54 0.84 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: FFFFFFFF
eMMC CID: 0000000000000000,bad code!
ID check lost!
Read Info...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.20 0.02 0.02 0.32 0.00 0.00
Power ON : 2.62 1.77 2.54 0.99 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056335730304D003BA7604AA0
eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901
ID check: 00010015
Product name: V3W00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
ID check success. time:0.59 sec.
Erasing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.18 0.02 0.01 0.32 0.00 0.00
Power ON : 2.62 1.78 2.54 0.99 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056335730304D003BA7604AA0
eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901
ID check: 00010015
Product name: V3W00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...Boot1
Erase chip...Boot2
Erase chip...User
Erase chip success. time:4.91 sec.
Erasing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.19 0.01 0.01 0.33 0.00 0.00
Power ON : 2.62 1.77 2.54 0.99 1.71 0.00
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056335730304D003BA7604AA0
eMMC CSD: D02701320F5903FFF6DBFFEF8E4040
ID check: 00010015
Product name: V3W00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...Boot1
Erase chip...Boot2
Erase chip...User
Erase chip success. time:4.89 sec.
Writing...
Device Ready...
Device Ready...OK!
ID check...
Level (V) : VCC V18 VCCQ D0 CMD CLK
Pullup : 0.19 0.02 0.02 0.33 0.00 0.00
Power ON : 2.62 1.77 2.54 0.99 1.71 0.01
-------------------------------------------------------------------
eMMC ORC: C0FF8080
eMMC CID: 15010056335730304D003BA7604AA0
eMMC CSD: D02701320F5903FFF6DBFFEF8E4040
ID check: 00010015
Product name: V3W00M
User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
Boot partition size: 0x200000 ( 2.0M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...
Erase chip: 0.39 sec.
Write chip...
Write chip: 1.58 sec.
Verify chip...
Verify chip: 0.78 sec.
>>Write chip success. time:2.86 sec.

i try full dump -try boot 1 -change boot size and write boot1 ,boot2,ext-csd from worked phone but not successes
what can i do is rpmb is important ????
plz help me sir
another question can i know is my phone need boot repair before soldering or try? sorry for my long questions

syrmic · 02-12-2014, 13:27

pleas sir help me sir

xDiRECT · 02-12-2014, 14:21

if the phone doesn't power on after ISP then check power IC

syrmic · 02-12-2014, 15:13

anther question can i know if my phone need to repair by power suply value or cant???
this answer is important for me

xDiRECT · 02-12-2014, 15:21

you need to try with and without, no other way.

syrmic · 02-12-2014, 18:09

sorry sir , i cant understand this point -if i had phone dead came dead is any way to know if this phone need to repair
for example n7100-i9300 no product name you explain to us when should use isp when we should replace emmc
my point is if i had dead phone can i know if it need repair boot or power ic
again sorry for my question

high-tech · 02-23-2014, 02:29

Quote:

Originally Posted by syrmic

sorry sir , i cant understand this point -if i had phone dead came dead is any way to know if this phone need to repair
for example n7100-i9300 no product name you explain to us when should use isp when we should replace emmc
my point is if i had dead phone can i know if it need repair boot or power ic
again sorry for my question

yes you can try it with regular power supply, for example you have dead i9300 in hand and you wanto check if it can prepair via isp, just connect your daed i9300 to to power supply and power it on ,

if your power supply read up to 12% or up to 15% and return to 00% after u release the power button , then your phone have good hardware you can repair it via isp or gpg s-boot clip,

but if your dead phone read up to 8% or up to 10% check the power ic

if your dead phone read up to 18% or up to 20% emmc damage you need to replace it ,, tested by me 100%

02-10-2014, 18:53	#1 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	n7100 writing filed with odin after repair [Answered] hi team i have n7100 dead boot and i used isp and writ full dump -boot1-boot2 this my log 1- with full dump Writing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.39 0.02 0.62 0.33 0.00 0.00 Power ON : 2.62 1.77 2.54 1.00 1.72 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056335730304D003BA7604AA0 eMMC CSD: D02701320F5903FFF6DBFFEF8E4040 ID check: 00010015 Product name: V3W00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x400000 ( 4.0M ) RPMB partition size: 0x80000 ( 0.5M ) ID check...OK! Erase chip...Boot1 Erase chip: 0.42 sec. Write chip...Boot1 Write chip: 1.89 sec. Verify chip...Boot1 Verify chip: 0.88 sec. Erase chip...Boot2 Erase chip: 0.41 sec. Write chip...Boot2 Write chip: 1.75 sec. Verify chip...Boot2 Verify chip: 0.86 sec. Erase chip...User Erase chip: 4.64 sec. Write chip...User Write chip: 12219.50 sec. Verify chip...User Verify chip: 2836.16 sec. Write chip success. time:15067.05 sec. 2- with only boot Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.21 0.02 0.01 0.33 0.00 0.00 Power ON : 2.62 1.78 2.54 1.00 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056335730304D003BA7604AA0 eMMC CSD: D02701320F5903FFF6DBFFEF8E4040 ID check: 00010015 Product name: V3W00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x400000 ( 4.0M ) RPMB partition size: 0x80000 ( 0.5M ) ID check...OK! ID check success. time:0.77 sec. Erasing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.18 0.02 0.01 0.33 0.00 0.00 Power ON : 2.62 1.77 2.54 1.00 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: E2A0200AC66AE60609A00774EC0954 eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901 ID check: 20A000E2 Product name: __j___ User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x400000 ( 4.0M ) RPMB partition size: 0x80000 ( 0.5M ) ID check...OK! Erase chip...Boot1 Erase chip...Boot2 Erase chip...User Erase chip success. time:5.64 sec. Writing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.23 0.01 0.01 0.33 0.00 0.00 Power ON : 2.62 1.77 2.54 1.00 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: E2A0200AC66AE60609A00774EC0954 eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901 ID check: 20A000E2 Product name: __j___ User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x400000 ( 4.0M ) RPMB partition size: 0x80000 ( 0.5M ) ID check...OK! Erase chip...Boot1 Erase chip: 0.42 sec. Write chip...Boot1 Write chip: 1.55 sec. Verify chip...Boot1 Verify chip: 0.78 sec. >>Write chip success. time:2.92 sec. now my phone detected with Odin but-filed on boot bin

02-10-2014, 19:03	#2 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	now my phone is totaly dead after boor repair with Samsung_N7100_GPG_New_(The_number_of_mobile_phone) \Samsung_N7100_GPG(The_number_of_mobile_phone ).boot1

02-11-2014, 11:31	#4 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	thanks sir for reply handset came completly dead i write boot1 and boot2 then detected with odin but failed at boot writing via odin also i tried full dump but my phone completly dead my logs in first post sir i want to ask one question i have nother phone working ok can i dump boot then write to phone or shoud make full dump????

02-11-2014, 12:10	#7 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	thanks sir i will try but i am confused about Boot partition size for example i have boot partition size is 4m and i see on video boot size is 2m can you explain deference between both thank for your patient

02-11-2014, 21:16	#9 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	hi sir 1st check my log Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.16 0.00 0.01 1.39 0.00 0.00 Power ON : 2.62 1.77 2.54 0.84 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: FFFFFFFF eMMC CID: 0000000000000000,bad code! ID check lost! Read Info... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.20 0.02 0.02 0.32 0.00 0.00 Power ON : 2.62 1.77 2.54 0.99 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056335730304D003BA7604AA0 eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901 ID check: 00010015 Product name: V3W00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! ID check success. time:0.59 sec. Erasing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.18 0.02 0.01 0.32 0.00 0.00 Power ON : 2.62 1.78 2.54 0.99 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056335730304D003BA7604AA0 eMMC CSD: FF409C04C83D640FFFDB6FFFBE3901 ID check: 00010015 Product name: V3W00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Erase chip...Boot1 Erase chip...Boot2 Erase chip...User Erase chip success. time:4.91 sec. Erasing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.19 0.01 0.01 0.33 0.00 0.00 Power ON : 2.62 1.77 2.54 0.99 1.71 0.00 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056335730304D003BA7604AA0 eMMC CSD: D02701320F5903FFF6DBFFEF8E4040 ID check: 00010015 Product name: V3W00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Erase chip...Boot1 Erase chip...Boot2 Erase chip...User Erase chip success. time:4.89 sec. Writing... Device Ready... Device Ready...OK! ID check... Level (V) : VCC V18 VCCQ D0 CMD CLK Pullup : 0.19 0.02 0.02 0.33 0.00 0.00 Power ON : 2.62 1.77 2.54 0.99 1.71 0.01 ------------------------------------------------------------------- eMMC ORC: C0FF8080 eMMC CID: 15010056335730304D003BA7604AA0 eMMC CSD: D02701320F5903FFF6DBFFEF8E4040 ID check: 00010015 Product name: V3W00M User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes Boot partition size: 0x200000 ( 2.0M ) RPMB partition size: 0x20000 ( 0.1M ) ID check...OK! Erase chip... Erase chip: 0.39 sec. Write chip... Write chip: 1.58 sec. Verify chip... Verify chip: 0.78 sec. >>Write chip success. time:2.86 sec. i try full dump -try boot 1 -change boot size and write boot1 ,boot2,ext-csd from worked phone but not successes what can i do is rpmb is important ???? plz help me sir another question can i know is my phone need boot repair before soldering or try? sorry for my long questions

02-12-2014, 13:27	#10 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	pleas sir help me sir

02-12-2014, 14:21	#11 (permalink)
xDiRECT Cheater -Don't Deal with him- Join Date: Jul 2012 Age: 41 Posts: 346 Member: 1791133 Status: Offline Thanks Meter: 89	if the phone doesn't power on after ISP then check power IC

02-12-2014, 15:13	#12 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	anther question can i know if my phone need to repair by power suply value or cant??? this answer is important for me

02-12-2014, 15:21	#13 (permalink)
xDiRECT Cheater -Don't Deal with him- Join Date: Jul 2012 Age: 41 Posts: 346 Member: 1791133 Status: Offline Thanks Meter: 89	you need to try with and without, no other way.

02-12-2014, 18:09	#14 (permalink)
syrmic Freak Poster Join Date: Nov 2007 Location: egypt Age: 37 Posts: 245 Member: 625817 Status: Offline Sonork: 1592120 Thanks Meter: 32	sorry sir , i cant understand this point -if i had phone dead came dead is any way to know if this phone need to repair for example n7100-i9300 no product name you explain to us when should use isp when we should replace emmc my point is if i had dead phone can i know if it need repair boot or power ic again sorry for my question