j327p binary 3 unclokc done by gcrpo

[sucre13]

Using Version...1.0.0.0056
Selected Model GT-I5503
Selected Task SAMSUNG SPRINT UNLOCK

Searching ADB device Please wait..
Device Detected...
SELinux := Enforcing
model:= SM-J327P
Androids Version:= 6.0.1
Description Version:= j3popltespr-user 6.0.1 MMB29M J327PVPU3AQJ3 release-keys
Platform:= msm8937 [ qcom ] [ MSM8917 ]
Baseband:= J327PVPU3AQJ3
VER:= J327PVPU3AQJ3/J327PSPT3AQJ3/J327PVPU3AQJ3/J327PVPU3AQJ3
Carrier := XAS_USA
Knox Warranty := Void
AP UART Status := Disable.
Security Patch := 01-08-2017
Simstatus:= CARD_IO_ERROR
ANDROID-ID = 42e5d82e_000038BDE7
SU Version..2.79:SUPERSU
Device is Secure Rooted..uid=0
System Permission is Read/Write...
SAMSUNG ALL SPRINT UNLOCKING STARTED...
Please Wait while...
Checking Data...
Waiting for Loader...
Loader Ok...
Build...MPSS.JO.1.2.c2.2-00032-8937_GENNS_PACK-1.78949.1.85417.1
SPC Is Valid..
Sec Test Passed..
error 0x1a_19
Direct Unlock Success...

!!! Success !!!!

Restart Phone Manually if not done auto...
Total Time Take...00:01:01
Log Saved

[lolo24]

it is necessary root the device??

[vaevictus0321]

Originally Posted by lolo24

it is necessary root the device??

no you dont need to root

[galaxyrua]

Is there anyone able to add APN after the unlock

[gsm_service4u]

Originally Posted by galaxyrua

Is there anyone able to add APN after the unlock

Yes, it's in settings, if you are original u1 firmware it might not have it, simply update.

If you have uart cable switch CSC type to XAS with AT commands:
First, enter *#0*# on the keypad for diag mode.
Plug it in and out a few times with a 500Kohm cable to enable diag mode on the phone.
In GCPro select the correct uart port, then enter "AT" a few times to get the "OK" response back.
Enter:
AT+PRECONFG=2,XAS
To verify the CSC enter:
AT+PRECONFG=1,0


If you got don't have uart but DO root you can do this another way with any sprint phone - ADB Command

with supersu:
Adb shell su
with eng root
Adb shell echo "XAS" > /efs/imei/mps_code.dat

Doing this removes boot animations and might enable apn if you don't have apn menu available currently.

[BillA]

Originally Posted by gsm_service4u

Yes, it's in settings, if you are original u1 firmware it might not have it, simply update.

If you have uart cable switch CSC type to XAS with AT commands:
First, enter *#0*# on the keypad for diag mode.
Plug it in and out a few times with a 500Kohm cable to enable diag mode on the phone.
In GCPro select the correct uart port, then enter "AT" a few times to get the "OK" response back.
Enter:
AT+PRECONFG=2,XAS
To verify the CSC enter:
AT+PRECONFG=1,0


If you got don't have uart but DO root you can do this another way with any sprint phone - ADB Command

with supersu:
Adb shell su
with eng root
Adb shell echo "XAS" > /efs/imei/mps_code.dat

Doing this removes boot animations and might enable apn if you don't have apn menu available currently.

IF for some reason neither of those CSC changes enable the APN editor, you also try using some shortcut maker (ex. Quick Shortcuts) and search for each of these words separately "LTE", "ROAM", "APN", go through all the various activities, and sometimes even searching for keyboard codes works.
Just want to remind, always try CSC mode first, then use the shortcuts as a last resort, with or without root (of course root is preferred).

[luisy]

I have seen with UART comands it will change CSC, but I want to remove split messages on sms, maybe there are a way to fix it. Thanks

[diegore17]

i have a j727p qj3 with android 7.0 can i downgrade to 6 to make this process? i tried with 7.0 but this happen ""Please flash with unlock file at support or combination firmware or ROOT Phone no other solution at present..""

[luisy]

What binary is? If =3 ou can flash QJ3 firmware with odin and make full process.

[BillA]

Originally Posted by luisy

I have seen with UART comands it will change CSC, but I want to remove split messages on sms, maybe there are a way to fix it. Thanks

Unfortunately the 160 character split message issue is caused by the messaging app which is baked into the firmware, so the easiest solution is just to install some 3rd party messaging app like Android Messages, Handcent SMS, Chomp SMS, Pulse SMS, Textra SMS, etc. Or if the built-in messaging has a setting option like "Combine messages" try turning it on. There are ways to fix the built in messaging app too, but it's messy, need to root it then modify the system settings database, so I'd suggest to stick with a 3rd party app.