HTC 10 bootloader unlock fail [SOLVED] - GSM-Forum

Tatek · 11-02-2016, 12:27

Hi!

I want to unlock the bootloader on a HTC10

i get this error:

Starting bootloader unlock procedure
Phone detected, reading token...
Token detected successfully
Checking server connection...
Communicating with the XTC 2 Clip ...
Connecting to the server...
Waiting for the server to process request, it may take up to 5 minutes...
Your request was processed successfully! Unlock token has been obtained
Sending flash unlocktoken "C:\Program Files\XTC 2 Tool\\unlocktoken_XXXXXXXX.bin"
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... (bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
FAILUnlockToken Verify Fail!!
FAILED (remote: UnlockToken Verify Fail!!)
Execution time is 1(s)
Error: The unlock token was not accepted by the phone. Try to re-calculate it again.

any ideas?

thnx

xtc2clip · 11-02-2016, 12:59

Hello,

Yes. This is normal.
Do this:
Reboot phone. Connect phone to PC. Wait 20 seconds.
Start bootloader unlock process.
When asked - choose to recalculate token.

Tatek · 11-02-2016, 13:45

Tried several times...
After a lot of tries it worked

11-02-2016, 12:27	#1 (permalink)
Tatek Freak Poster Join Date: Mar 2005 Location: Hungary Age: 40 Posts: 499 Member: 132496 Status: Offline Thanks Meter: 34	HTC 10 bootloader unlock fail [SOLVED] Hi! I want to unlock the bootloader on a HTC10 i get this error: Starting bootloader unlock procedure Phone detected, reading token... Token detected successfully Checking server connection... Communicating with the XTC 2 Clip ... Connecting to the server... Waiting for the server to process request, it may take up to 5 minutes... Your request was processed successfully! Unlock token has been obtained Sending flash unlocktoken "C:\Program Files\XTC 2 Tool\\unlocktoken_XXXXXXXX.bin" sending 'unlocktoken' (0 KB)... OKAY writing 'unlocktoken'... (bootloader) flash unlocktoken (bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp (bootloader) [KillSwitch] Last Byte is 0X01, enable unlock FAILUnlockToken Verify Fail!! FAILED (remote: UnlockToken Verify Fail!!) Execution time is 1(s) Error: The unlock token was not accepted by the phone. Try to re-calculate it again. any ideas? thnx

11-02-2016, 12:59	#2 (permalink)
xtc2clip No Life Poster Join Date: Jun 2015 Posts: 6,556 Member: 2416253 Status: Offline Thanks Meter: 4,162	Hello, Yes. This is normal. Do this: Reboot phone. Connect phone to PC. Wait 20 seconds. Start bootloader unlock process. When asked - choose to recalculate token.

11-02-2016, 13:45	#3 (permalink)
Tatek Freak Poster Join Date: Mar 2005 Location: Hungary Age: 40 Posts: 499 Member: 132496 Status: Offline Thanks Meter: 34	Tried several times... After a lot of tries it worked