problem with do operation with endeavoru PJ4610000

[UNKNOWN GSM]

Hi
phone is in normal state
im trying to do s-off supercid but not success with any operations

Sending getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.73.0000
(bootloader) version-baseband: 5.1204.167.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.707.5
(bootloader) serialno: SH261W102611
(bootloader) imei: 353426056202955
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4105mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Execution time is 937(ms)
all: Done!

Sending oem readsecureflag
... (bootloader) DEBUG: secure_flag: 3
Execution time is 156(ms)
OKAY

Sending oem readcid
... (bootloader) DEBUG: cid: HTC__044
Execution time is 125(ms)
OKAY

folow this post : http://forum.gsmhosting.com/vbb/f961...-tell-1965321/
phones bootloader is in lock state and every things like to be ok because phone is detecting drive via Y cabl and trying to load the files
files inside the drive are ok i check them manually too


where is my wrong step

[jmr]

Unplug cable wait see simlock plug again check simlock and wait finish say press vol up to reset is all for this need cable y

[UNKNOWN GSM]

Originally Posted by jmr

Unplug cable wait see simlock plug again check simlock and wait finish say press vol up to reset is all for this need cable y

yes
Done
close thread plz
BR

[xtc2clip]

Oh yes, this "Disconnect USB" message can be very confusive!

Thanks jmr