Huawei Y3c Flash done With UMT

[Elgendi]

Huawei Y3c Flash done With UMT

EXE: Ultimate Unisoc Module v0.1
ACTION: Flash Firmware.
Selected firmware: Y336-U02V100R001C328B109.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Detected: SPRD U2S Diag (COM22)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:02] Loader ok
[00:00:02] Reconnecting .
Detected: SPRD U2S Diag (COM22)
[00:00:04] Wait for loader....
Loader OK: ~"Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:04] [1]First boot done.
[00:00:05] Sending second loader.
[00:00:08] Second loader sent ok.
[00:00:08] Reading: system
System name: system
Phone and firmware have same android
[00:00:08] Reading: miscdata
[00:00:08] Reading: wfixnv1
NVRAM saved to: C:\Users\Gendi\Documents\spreadtrum_module\flashmode_nvram_backup\_863695035159501\_863695035159501_nvram_backup.tar
[00:00:15] Making flash ic repartition.
[00:00:15] Start write: wfixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting SimLockSign id: 0x19F
Protecting SupportGsmOnly id: 0x7E4
Protecting SimLockCustomize id: 0x1F0
Protecting SimLockUserdata id: 0x1F1
Protecting SimLockCtrlkey id: 0x1F2
[00:00:17] Format: dlstat
[00:00:17] [dlstat]Format OK.
[00:00:17] Start write: prodnv
[00:00:19] Format: uboot
[00:00:20] [uboot]Format OK.
[00:00:20] Format: globalinfo
[00:00:20] [globalinfo]Format OK.
[00:00:20] Start write: splloader
[00:00:20] Start write: wmodem
[00:00:24] Start write: wdsp
[00:00:26] Start write: boot
[00:00:31] Start write: recovery
[00:00:36] Start write: system
[00:05:00] Start write: userdata
[00:05:11] Start write: logo
[00:05:12] Start write: fbootlogo
[00:05:12] Start write: sysinfo
[00:05:13] Start write: custom
[00:05:31] Format: wruntimenv1
[00:05:31] [wruntimenv1]Format OK.
[00:05:31] Start write: cache
[00:05:33] Format: misc
[00:05:33] [misc]Format OK.
[00:05:33] Start write: uboot
[00:05:34] Start write: dlstat
Flashing done.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\Gendi\Documents\spreadtrum_module\Saved_Logs\_writepac__2.txt
Total Time: 00:05:48
Done.