★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 468 - GSM-Forum

Yahia_Sb · 05-29-2019, 14:59

Operation : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device...Found
Brand : xiaomi
Model : Redmi Note 4
Product : mido
Device : mido
Andriod Ver. : 7.0
Patch Level : 2018-12-01
Bootloader : unknown
Build ID : AL1512-mido-build-20190128095656
Build Date : Mon Jan 28 09:56:54 WIB 2019
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 4.0

Tanha0321 · 05-29-2019, 18:20

Code:

Device    : Vivo V7 Plus
Operation    : Reset Locks (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info    : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1A00900 [8953] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : vivo vivo 1716 [msm8953]
Software    : N2G47H release-keys, eng.compil.20180528.223559 [Mon May 28 22:35:59 CST 2018]
Android Ver.    : 7.1.2
Patch Level    : 2018-05-01
USERDATA    : Encrypted
Reading Extended Information...OK
Model    : vivo 1716
Product    : PD1708F_EX
Cust. Name    : PD1708F_EX-PK
Version    : PD1708F_EX_A_1.17.15
Resetting Locks (Vivo)...Done
Please wait for phone to reboot.
Operation Finished.
QcFire Ver. 4.1

Yahia_Sb · 05-30-2019, 05:19

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM77)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953]
Software : N2G47H, V9.6.4.0.NDAMIFD [Tue Jul 31 20:05:06 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-06-01
Resetting FRP Lock......Done
Operation Finished.

..::GMSR::.. · 05-30-2019, 13:38

Operation : Repair IMEI
Searching for Device in FTM Mode...Found
Port : ZTE Handset Diagnostic Interface(DFU) (COM40)
Hardware ID : usb\vid_19d2&pid_0249&rev_0310&mi_00
Compile : Feb 14 2019 23:23:56
Release : May 10 2017 19:00:00
Hw. Ver. : 8909.gen
Software : ZA_MR4_VDF_P809V51V1.0.0B03
IMEI : 352249093867171 / 000000000000000
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\8909.gen_ZA_MR4_VDF_P8 09V51V1.0.0B03_352249093867171_190530_142323.qcn
Switching to EDL Mode...Done
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : HS-USB Diagnostics 9008 (COM45)
Driver Info : Mobile, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000400
OPK_DATA : BA512444EBFE66557163424226D37E971BFEF7EEE7AE4D70F7 07FA432EF0B039
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_038]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Vodafone VFD 511 [msm8909]
Software : VFD-51x_MRB02, 20190214.233343 [2019å¹´ 02æœˆ 14æ—¥ æ˜ŸæœŸå›› 23:33:43 CST]
Android Ver. : 7.1.1
Patch Level : 2019-01-01
Saving EFS Backup.......OK
EFS Backup : EFS_Vodafone_VFD 511_VFD-51x_MRB02_2019-01-01_190530_142437.ueb
Reset EFS (Full)......Done
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.
QcFire Ver. 4.2

mickeybrown026 · 05-30-2019, 14:02

Model : N920T
Operation : Reset FRP (UART)
Searching for Phone...Found
Port: : COM499 : SAMSUNG Mobile USB Modem #3
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Waiting for user to select UART Port...
Port : COM252 : USB Serial Port (COM252)
Keep holding VOL DOWN + POWER button...Phone Found, LEAVE Buttons NOW!
Preparing Device...Done
Resetting FRP Data...Done
Resetting Samsung Account Data...Done
Resetting EE Data...Done
Operation Finished.
Elapsed Time 02:16
Module Ver. 0.2
LOG Saved to !Logs\190530_125956.log

mickeybrown026 · 05-30-2019, 14:15

Model : Samsung
Operation : Make Rooted Boot Image
Image Type : Plain
Preparing Data...Done
Unpacking Boot Image...Done
Injecting Root Script...Done
Patching Kernel...Done
Checking for Real-time Kernel Protection...Not Found
Checking for Defex...Not Found
Checking for Verity...Not Found
Repacking Image...Done
Saved as : C:\Users\HONEST-LINK\Downloads\n920t\boot.srb
Searching for Phone...Found
Port: : COM756 : SAMSUNG Mobile USB Modem #109
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-N920T
IMEI: : 354035070041304
Software: : N920TUVU4EQG3/N920TTMB4EQG3/N920TUVU4EQG3/N920TUVU4EQG3
Product : TMB
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM499 : SAMSUNG Mobile USB Modem #3
Reading Data from Phone...Done
Chipset : LSI7420 [HiSpeed]
Loading Data...Done
Sending Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 01:15
Module Ver. 0.2
LOG Saved to !Logs\190530_131256.log

..::GMSR::.. · 05-31-2019, 10:36

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : HS-USB Diagnostics 9008 (COM45)
Driver Info : Mobile, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Mobicel Icon [msm8909]
Software : , 66 [Wed Nov 30 11:53:06 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-04-01Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.2

..::GMSR::.. · 05-31-2019, 11:20

Operation : Reset FRP
Checking for existing devices...Found
Port : HS-USB Diagnostics 9008 (COM45)
Driver Info : Mobile, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000400
OPK_DATA : BA512444EBFE66557163424226D37E971BFEF7EEE7AE4D70F7 07FA432EF0B039
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_038]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Vodafone VFD 511 [msm8909]
Software : VFD-51x_MRB01, 20170909.143903 [2017å¹´ 09æœˆ 09æ—¥ æ˜ŸæœŸå…* 14:39:05 CST]
Android Ver. : 7.1.1
Patch Level : 2017-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.2

Ankit Verma · 05-31-2019, 14:35

OPPO A37f Pattern Lock Removed by UMT Dongle | OPPO A37f Frp Reset

Thanks UMT Team

Ankit Verma · 05-31-2019, 14:35

OPPO A37f Pattern Lock Removed by UMT Dongle | OPPO A37f Frp Reset

Thanks UMT Team

mickeybrown026 · 06-01-2019, 14:18

Model : A310F
Operation : ADB Reset FRP
Searching for Device...Found
Brand : Nokia
Model : TA-1021
Product : D1C
Device : PLE
Andriod Ver. : 8.0.0
Patch Level : 2018-02-01
Bootloader : unknown
Build ID : 00WW_5_22A
Build Date : Tue Jan 23 17:44:13 CST 2018
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
Operation Finished.
Elapsed Time 00:08
Module Ver. 0.2
LOG Saved to !Logs\190601_131540.log

orhan5 · 06-02-2019, 23:12

Port : COM272 : Qualcomm HS-USB Diagnostics 9091 (COM272)
Baud Rate : 921600
Device : Qualcomm Android
Operation : Write IMEI [QCOM Advance]
Opening Port... OK
Reading Phone Information... OK
Compile : Aug 16 2017 17:09:02
Release : Aug 16 2017 17:09:02
Hw Ver. : sdm660.g
Build : M1.5.1.P6-Titan_004001
IMEI [1] : 000000000000000
IMEI [2] : 000000000000000
Method : QCOM Advance
Preparing Data... Done
Writing IMEI 1 [359346xxxxxxxxx]... OK
New IMEI : 359346xxxxxxxx
Rebooting Phone... Done
Please reboot maunally if does not reboot automatically.
Operation Finished.
Elapsed Time: 00:03
[Module Ver. 4.4]
Log Saved to Logs\190603_010950.log

mandeep145 · 06-03-2019, 02:42

vivo y71i pattern & frp done

swapan · 06-03-2019, 06:22

Vivo-V7+ (1716) Password & Frp Unlock Done

swapan · 06-03-2019, 06:26

Vivo-V7-Plus (1716) Frp Reset

05-30-2019, 14:02	#7010 (permalink)
mickeybrown026 No Life Poster Join Date: Dec 2016 Location: . Posts: 869 Member: 2659717 Status: Offline Thanks Meter: 487	N920t frp done Model : N920T Operation : Reset FRP (UART) Searching for Phone...Found Port: : COM499 : SAMSUNG Mobile USB Modem #3 Checking for Device...Found [Download Mode] Reading Data from Phone...Done Chipset : LSI7420 [HiSpeed] Waiting for user to select UART Port... Port : COM252 : USB Serial Port (COM252) Keep holding VOL DOWN + POWER button...Phone Found, LEAVE Buttons NOW! Preparing Device...Done Resetting FRP Data...Done Resetting Samsung Account Data...Done Resetting EE Data...Done Operation Finished. Elapsed Time 02:16 Module Ver. 0.2 LOG Saved to !Logs\190530_125956.log

05-30-2019, 14:15	#7011 (permalink)
mickeybrown026 No Life Poster Join Date: Dec 2016 Location: . Posts: 869 Member: 2659717 Status: Offline Thanks Meter: 487	N920T root and flash done Model : Samsung Operation : Make Rooted Boot Image Image Type : Plain Preparing Data...Done Unpacking Boot Image...Done Injecting Root Script...Done Patching Kernel...Done Checking for Real-time Kernel Protection...Not Found Checking for Defex...Not Found Checking for Verity...Not Found Repacking Image...Done Saved as : C:\Users\HONEST-LINK\Downloads\n920t\boot.srb Searching for Phone...Found Port: : COM756 : SAMSUNG Mobile USB Modem #109 Checking for Device...Found [Normal Mode] Reading Phone Information...OK Model: : SM-N920T IMEI: : 354035070041304 Software: : N920TUVU4EQG3/N920TTMB4EQG3/N920TUVU4EQG3/N920TUVU4EQG3 Product : TMB Init Download Mode...OK Waiting for phone in Download Mode...OK Port: : COM499 : SAMSUNG Mobile USB Modem #3 Reading Data from Phone...Done Chipset : LSI7420 [HiSpeed] Loading Data...Done Sending Data...Done Closing Session...Done Operation Finished. Elapsed Time 01:15 Module Ver. 0.2 LOG Saved to !Logs\190530_131256.log

06-01-2019, 14:18	#7016 (permalink)
mickeybrown026 No Life Poster Join Date: Dec 2016 Location: . Posts: 869 Member: 2659717 Status: Offline Thanks Meter: 487	Nokia 9(TA-1021) frp done Model : A310F Operation : ADB Reset FRP Searching for Device...Found Brand : Nokia Model : TA-1021 Product : D1C Device : PLE Andriod Ver. : 8.0.0 Patch Level : 2018-02-01 Bootloader : unknown Build ID : 00WW_5_22A Build Date : Tue Jan 23 17:44:13 CST 2018 Checking Root Status...Done Root : No Root Resetting FRP Lock...Done Operation Finished. Elapsed Time 00:08 Module Ver. 0.2 LOG Saved to !Logs\190601_131540.log

06-02-2019, 23:12	#7017 (permalink)
orhan5 No Life Poster Join Date: Sep 2016 Location: IN THIS WORLD Age: 33 Posts: 1,174 Member: 2621892 Status: Offline Sonork: 1677742 Thanks Meter: 456	Asus zenfone 4 imei repair Done Port : COM272 : Qualcomm HS-USB Diagnostics 9091 (COM272) Baud Rate : 921600 Device : Qualcomm Android Operation : Write IMEI [QCOM Advance] Opening Port... OK Reading Phone Information... OK Compile : Aug 16 2017 17:09:02 Release : Aug 16 2017 17:09:02 Hw Ver. : sdm660.g Build : M1.5.1.P6-Titan_004001 IMEI [1] : 000000000000000 IMEI [2] : 000000000000000 Method : QCOM Advance Preparing Data... Done Writing IMEI 1 [359346xxxxxxxxx]... OK New IMEI : 359346xxxxxxxx Rebooting Phone... Done Please reboot maunally if does not reboot automatically. Operation Finished. Elapsed Time: 00:03 [Module Ver. 4.4] Log Saved to Logs\190603_010950.log

06-03-2019, 06:22	#7019 (permalink)
swapan No Life Poster Join Date: Aug 2006 Location: UAE Posts: 2,377 Member: 330460 Status: Offline Sonork: (Off Line) Thanks Meter: 6,479	Vivo-V7+ (1716) Password & Frp Unlock Done Vivo-V7+ (1716) Password & Frp Unlock Done

05-29-2019, 14:59	#7006 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Operation : Mi Anti Relock Checking for device in ADB mode...Found! Searching for Device...Found Brand : xiaomi Model : Redmi Note 4 Product : mido Device : mido Andriod Ver. : 7.0 Patch Level : 2018-12-01 Bootloader : unknown Build ID : AL1512-mido-build-20190128095656 Build Date : Mon Jan 28 09:56:54 WIB 2019 Disabling Mi Account Relock...Verified OK... Done Operation Finished. QcFire Ver. 4.0

05-30-2019, 05:19	#7008 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Operation : Reset FRP Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM77) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1A00900 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8953_009]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8953, eMMC, 16 GB LU Count : 1 [0x01D1F000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Redmi 5 [msm8953] Software : N2G47H, V9.6.4.0.NDAMIFD [Tue Jul 31 20:05:06 WIB 2018] Android Ver. : 7.1.2 Patch Level : 2018-06-01 Resetting FRP Lock......Done Operation Finished.

05-30-2019, 13:38	#7009 (permalink)
..::GMSR::.. No Life Poster Join Date: Nov 2010 Location: RSA-2048 Age: 38 Posts: 1,716 Member: 1444462 Status: Offline Thanks Meter: 1,337	Operation : Repair IMEI Searching for Device in FTM Mode...Found Port : ZTE Handset Diagnostic Interface(DFU) (COM40) Hardware ID : usb\vid_19d2&pid_0249&rev_0310&mi_00 Compile : Feb 14 2019 23:23:56 Release : May 10 2017 19:00:00 Hw. Ver. : 8909.gen Software : ZA_MR4_VDF_P809V51V1.0.0B03 IMEI : 352249093867171 / 000000000000000 Reading QCN Data...Done Saved As : C:\UMTool\QcFire\QCN_Backup\8909.gen_ZA_MR4_VDF_P8 09V51V1.0.0B03_352249093867171_190530_142323.qcn Switching to EDL Mode...Done Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : HS-USB Diagnostics 9008 (COM45) Driver Info : Mobile, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1009600 [8909] 00000400 OPK_DATA : BA512444EBFE66557163424226D37E971BFEF7EEE7AE4D70F7 07FA432EF0B039 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8909_038]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8909, eMMC, 8 GB LU Count : 1 [0x00E90000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Vodafone VFD 511 [msm8909] Software : VFD-51x_MRB02, 20190214.233343 [2019å¹´ 02æœˆ 14æ—¥ æ˜ŸæœŸå›› 23:33:43 CST] Android Ver. : 7.1.1 Patch Level : 2019-01-01 Saving EFS Backup.......OK EFS Backup : EFS_Vodafone_VFD 511_VFD-51x_MRB02_2019-01-01_190530_142437.ueb Reset EFS (Full)......Done Processing background tasks...Done Restoring QCN Data...Done Finalizing process...Done Operation Finished. QcFire Ver. 4.2

05-31-2019, 10:36	#7012 (permalink)
..::GMSR::.. No Life Poster Join Date: Nov 2010 Location: RSA-2048 Age: 38 Posts: 1,716 Member: 1444462 Status: Offline Thanks Meter: 1,337	Operation : Format FS Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : HS-USB Diagnostics 9008 (COM45) Driver Info : Mobile, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1009600 [8909] 00000000 OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E Initializing Protocol...OK Using Auto Loader Selection [2] Preparing Loader...Done Sending Loader [8909_012]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8909, eMMC, 8 GB LU Count : 1 [0x00E90000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Mobicel Icon [msm8909] Software : , 66 [Wed Nov 30 11:53:06 CST 2016] Android Ver. : 6.0.1 Patch Level : 2016-04-01Done Resetting FRP Lock......Done Operation Finished. QcFire Ver. 4.2

05-31-2019, 11:20	#7013 (permalink)
..::GMSR::.. No Life Poster Join Date: Nov 2010 Location: RSA-2048 Age: 38 Posts: 1,716 Member: 1444462 Status: Offline Thanks Meter: 1,337	Operation : Reset FRP Checking for existing devices...Found Port : HS-USB Diagnostics 9008 (COM45) Driver Info : Mobile, qcusbser.sys, 2.1.2.2 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1009600 [8909] 00000400 OPK_DATA : BA512444EBFE66557163424226D37E971BFEF7EEE7AE4D70F7 07FA432EF0B039 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8909_038]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8909, eMMC, 8 GB LU Count : 1 [0x00E90000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Vodafone VFD 511 [msm8909] Software : VFD-51x_MRB01, 20170909.143903 [2017å¹´ 09æœˆ 09æ—¥ æ˜ŸæœŸå…* 14:39:05 CST] Android Ver. : 7.1.1 Patch Level : 2017-08-01 Resetting FRP Lock......Done Operation Finished. QcFire Ver. 4.2

05-31-2019, 14:35	#7014 (permalink)
Ankit Verma No Life Poster Join Date: May 2007 Location: Indore Posts: 549 Member: 506648 Status: Offline Sonork: 100.1614254 Thanks Meter: 702	OPPO A37f Pattern Lock Removed by UMT Dongle \| OPPO A37f Frp Reset Thanks UMT Team

05-31-2019, 14:35	#7015 (permalink)
Ankit Verma No Life Poster Join Date: May 2007 Location: Indore Posts: 549 Member: 506648 Status: Offline Sonork: 100.1614254 Thanks Meter: 702	OPPO A37f Pattern Lock Removed by UMT Dongle \| OPPO A37f Frp Reset Thanks UMT Team

06-03-2019, 02:42	#7018 (permalink)
mandeep145 Freak Poster Join Date: Jul 2008 Posts: 202 Member: 818995 Status: Offline Thanks Meter: 75	vivo y71i pattern & frp done

06-03-2019, 06:26	#7020 (permalink)
swapan No Life Poster Join Date: Aug 2006 Location: UAE Posts: 2,377 Member: 330460 Status: Offline Sonork: (Off Line) Thanks Meter: 6,479	Vivo-V7-Plus (1716) Frp Reset Vivo-V7-Plus (1716) Frp Reset