Unable to flash Redmi 9c

[andre128]

Before this I got 3 phones Redmi 9c stuck at 9008 mode all flash failed stopped cust.img

Today I got a working phone (new) same error when flashing

CPU : MT6765
Storage : EMMC
Scatter : E:\Firmware\Xiaomi\angelica_global_images_V12.0.15 .0.QCRMIXM_20210705.0000.00_10.0_global_a378c13d3d \angelica_global_images_V12.0.15.0.QCRMIXM_2021070 5.0000.00_10.0_global\images\MT6765_Android_scatte r.txt
DA Version : MTK_AllInOne_DA_v3.3001.01/21/2021.12:51
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM33
Port Name: MediaTek USB Port_V1633 (COM33)
Path: \\?\usb#vid_0e8d&pid_0003#5&155d656&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k65v1_64_bsp_210901_144254.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone now...
Port : MediaTek USB Port_V1633 (COM33)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
[0] WRITE TO PARTITION [ preloader ]
Flashing Bootloader...
[3] WRITE TO PARTITION [ recovery ]
Flashing Firmware...
[8] WRITE TO PARTITION [ cust ]
Flashing Failed!
Disconnect cable and Power ON phone.

[bk.gsm]

Originally Posted by andre128

Before this I got 3 phones Redmi 9c stuck at 9008 mode all flash failed stopped cust.img

Today I got a working phone (new) same error when flashing

first of all this phone is mtk chipset based phone,so it has not 9008 mode
9008 mode for qualcomm phones...

secondly,untick cust partition and reflash your phone again..

post results here..

[bk.gsm]

by the way,this model have 2 variants..

Redmi 9C/Poco C3(angelica) and Redmi 9C NFC(angelican)

b.r.

[andre128]

Originally Posted by bk.gsm

first of all this phone is mtk chipset based phone,so it has not 9008 mode
9008 mode for qualcomm phones...

secondly,untick cust partition and reflash your phone again..

post results here..

sorry, my bad...

stuck at 9008 mode is 9T and m3

flash failed cust.img is meizu m8

after skip cust.img flash done but the version of phone not changed (still old version)

[bk.gsm]

Originally Posted by andre128

sorry, my bad...

stuck at 9008 mode is 9T and m3

flash failed cust.img is meizu m8

after skip cust.img flash done but the version of phone not changed (still old version)

I don't understand you...Your thread title is Redmi 9C which is mtk phone..
now you are saying that you have a problem with 9T@m3 which u never mentioned in the first post..And you mentioned meizu m8???

please be more accurate

b.r.