Mi AccounT Remove Firmware BY SAYED TARIK

[fcporto]

Originally Posted by Franky_36

http://bigota.d.miui.com/V8.1.10.0.M...7557bfe334.tgz

Good news again and a thousand pardons, this is the question that I had to ask you from the beginning and since you have not said anything to me, I have confided that it was the dior model, I said a thousand pardons and sorry for the time you have lost with me, I'm really sorry, thank you.

you don't need to ask for sorry or to pardon yourself. I need to ask sorry to bother you and the forum for all this time i'm making you loose. I'm not used to xiaomi and did not know if that was important or not( the mido or other version). i'm downloading now and will tell feedback.
Thanks a lot.

[fcporto]

It went ok this time, in nck qualcomm module.
But after phone restart it got stucked in mi logo. i conect battery, restart phone and trows mw directly to connect to mi pcsuite directly.

Module 0.12.5
\par Operation: Download
\par Searching for phone.....
\par Qualcomm HS-USB QDLoader 9008 (COM33) detected.
\par Hello received.
\par HW ID: 00000000E1600400 MSM8953
\par PK HASH: 57158EAF1814D78FD2B3105ECE4DB18A817A08AC664A5782A9 25F3FF8403D39A
\par Checking database for suitable loader.....
\par Arhitecture:32 bits
\par [32]Sending loader, please wait..
\par Waiting for loader to start...
\par [0] Send NOP ok, loader start.
\par CPU: MSM8953
\par MaxPayloadSizeFromTargetInBytes: 4096
\par MaxPayloadSizeToTargetInBytes: 8192
\par Reading partition info, wait.
\par Volume[0] Size: 58,24 GB Partitions count: 49
\par [06A3BBCF]Userdata Size: 53,12 GB
\par [0]Writing: modem Start: 131072 length: 172032
\par [0]Writing: sbl1 Start: 393234 length: 721
\par [0]Writing: sbl1bak Start: 394258 length: 721
\par [0]Writing: rpm Start: 395282 length: 341
\par [0]Writing: rpmbak Start: 396306 length: 341
\par [0]Writing: tz Start: 397330 length: 2879
\par [0]Writing: tzbak Start: 401426 length: 2879
\par [0]Writing: devcfg Start: 405522 length: 66
\par [0]Writing: devcfgbak Start: 406034 length: 66
\par [0]Writing: dsp Start: 406546 length: 32768
\par [0]Writing: fsg Start: 524352 length: 254
\par [0]Writing: sec Start: 527424 length: 1
\par [0]Writing: splash Start: 655360 length: 1316
\par [0]Writing: aboot Start: 786432 length: 1136
\par [0]Writing: abootbak Start: 788480 length: 1136
\par [0]Writing: boot Start: 790528 length: 44179
\par [0]Writing: recovery Start: 921600 length: 46007
\par [0]Sparse writing: system Total chunks: 7185 BlockSize: 4096 Sector Size: 512
\par [0]Sparse writing: cache Total chunks: 15 BlockSize: 4096 Sector Size: 512
\par [0]Sparse writing: persist Total chunks: 14 BlockSize: 4096 Sector Size: 512
\par [0]Writing: lksecapp Start: 8912896 length: 113
\par [0]Writing: lksecappbak Start: 8913152 length: 113
\par [0]Writing: cmnlib Start: 8913408 length: 386
\par [0]Writing: cmnlibbak Start: 8913920 length: 386
\par [0]Writing: cmnlib64 Start: 8914432 length: 484
\par [0]Writing: cmnlib64bak Start: 8914944 length: 484
\par [0]Writing: keymaster Start: 8915456 length: 442
\par [0]Writing: keymasterbak Start: 8915968 length: 442
\par [0]Sparse writing: userdata Total chunks: 214 BlockSize: 4096 Sector Size: 512
\par [0]Writing: primarygpt Start: 0 length: 34
\par [0]Writing: backupgpt Start: NUM_DISK_SECTORS-33. length: 33
\par Applying patch, wait...
\par Erasing FRP, wait.....
\par Restarting phone.....
\par *************************************
\par
\par }

[fcporto]

Hello, again. Here's the status of situation:
Phone flashed ok with rom for Mido. In the end, with battery disconected and edl mode, hanged on logo. More than 30 minutes hanged. Connected battery and 5 seconds after, screen ***** "conect to pc suite". Connect to laptop, open mipcsuite and program says model not supported. Searched Mido roms, but this Xiaomi brand is crazy to understand it. Download another rom for this model, something "Global", to update or at least to see if piece comes back to life, but no program ables to flash it. Always error. Any help, Franky?

[Franky_36]

Originally Posted by fcporto

Hello, again. Here's the status of situation:
Phone flashed ok with rom for Mido. In the end, with battery disconected and edl mode, hanged on logo. More than 30 minutes hanged. Connected battery and 5 seconds after, screen ***** "conect to pc suite". Connect to laptop, open mipcsuite and program says model not supported. Searched Mido roms, but this Xiaomi brand is crazy to understand it. Download another rom for this model, something "Global", to update or at least to see if piece comes back to life, but no program ables to flash it. Always error. Any help, Franky?

Good again, this firmware is downloaded from the support of my ufi box tool, if at one time you relive it, thank you.

https://mshare.io/file/O3JMrO

[DUSKnenixs]

Originally Posted by fcporto

Hello, again. Here's the status of situation:
Phone flashed ok with rom for Mido. In the end, with battery disconected and edl mode, hanged on logo. More than 30 minutes hanged. Connected battery and 5 seconds after, screen ***** "conect to pc suite". Connect to laptop, open mipcsuite and program says model not supported. Searched Mido roms, but this Xiaomi brand is crazy to understand it. Download another rom for this model, something "Global", to update or at least to see if piece comes back to life, but no program ables to flash it. Always error. Any help, Franky?

i have this same problem, but in my case is a helium xiaomi, firmware always bootloop.

[Franky_36]

Originally Posted by DUSKnenixs

i have this same problem, but in my case is a helium xiaomi, firmware always bootloop.

Good, try with this firmware edl mode and with QFIL, any questions or problems comment, thanks.

https://mshare.io/file/WjS1AXFf

[nrekram]

Redmi 4 Framware Update

see there

https://www.youtube.com/watch?v=Bw-1uFA_nMA

[fcporto]

Originally Posted by Franky_36

Good again, this firmware is downloaded from the support of my ufi box tool, if at one time you relive it, thank you.

https://mshare.io/file/O3JMrO

Hello, once more, Franky 36. Once again i appreciate your effort on trying to help. So, here's the point of situation, once again. Last firmware you uploaded, also doesn't have sucess. I probably am doing something wrong. I tried both nck dongle and QFIL. On nck dongle it's different with this firmware. It just gives errors after errors, something like "error until writing block". With QFIL, it just says it will do job, but stays without doing nothing endlessly. When i disconect phone, program says it stopped working. I am using last version: 2.0.1.9. On program i am using flat build, correct? Anything i should do or i am doing wrong? Don't you have team viewer and try to give a direct hand on this? Situation is really ugly now....

[Franky_36]

Originally Posted by fcporto

Hello, once more, Franky 36. Once again i appreciate your effort on trying to help. So, here's the point of situation, once again. Last firmware you uploaded, also doesn't have sucess. I probably am doing something wrong. I tried both nck dongle and QFIL. On nck dongle it's different with this firmware. It just gives errors after errors, something like "error until writing block". With QFIL, it just says it will do job, but stays without doing nothing endlessly. When i disconect phone, program says it stopped working. I am using last version: 2.0.1.9. On program i am using flat build, correct? Anything i should do or i am doing wrong? Don't you have team viewer and try to give a direct hand on this? Situation is really ugly now....

Good, do it with my flash mode edl or as the last option miracle box crack, the firmware are original factory xiaomi, I do not understand anything, any problem that keeps happening do not hesitate to comment.

[fcporto]

Originally Posted by Franky_36

Good, do it with my flash mode edl or as the last option miracle box crack, the firmware are original factory xiaomi, I do not understand anything, any problem that keeps happening do not hesitate to comment.

Hi again. i really don't understand what you mean by this. Sorry, but i'm starting to think this is a bot or something for you to say always "good" and to "coment". i'm not going nowhere with this and phone is bricked now. is it so hard to make an explanation on what really steps should be done????
what miracle crack? all miracle cracks i find are youtube videos with links to nowhere. what you mean "my flash" mode edl? thats what i've been doing all the time and path leads to nothing....
would not be easy to leave links with programs to do job and step by step turotial???? How come you keep saying "good" if the phone is dead now???? i dont understand.....

[DUSKnenixs]

Originally Posted by fcporto

Hi again. i really don't understand what you mean by this. Sorry, but i'm starting to think this is a bot or something for you to say always "good" and to "coment". i'm not going nowhere with this and phone is bricked now. is it so hard to make an explanation on what really steps should be done????
what miracle crack? all miracle cracks i find are youtube videos with links to nowhere. what you mean "my flash" mode edl? thats what i've been doing all the time and path leads to nothing....
would not be easy to leave links with programs to do job and step by step turotial???? How come you keep saying "good" if the phone is dead now???? i dont understand.....

not dead, use tespoint, and update last version, phone are not dead, the problem is that, no solution now for Mi account for some type of xiaomi, my helium become dead, alive, dead, alive and so on, now is alive because with last version and tespoint you can recover always the phone.

bom ver malta tuga aqui

[maiga73]

Redmi MI6 MI Account Relock Need Solution Permanent

[Franky_36]

Originally Posted by maiga73

Redmi MI6 MI Account Relock Need Solution Permanent

Good, follow this video this is the only way and taking into account that version of miui has installed the xiaomi, thank you.

https://www.youtube.com/watch?v=IaWeJyzp8n4

[Franky_36]

Originally Posted by DUSKnenixs

not dead, use tespoint, and update last version, phone are not dead, the problem is that, no solution now for Mi account for some type of xiaomi, my helium become dead, alive, dead, alive and so on, now is alive because with last version and tespoint you can recover always the phone.

bom ver malta tuga aqui

Hi, I leave you two links, one is the program mipcsuite3.0 in which it automatically detects the appropriate firmware according to the model of xiaomi that you have, just follow the steps as install and translate to English and another link on how to use it, I hope that Serve and forgive the delay in answering since I have a lot of work and it has been impossible for me to answer, thank you.

link del programa seguid los pasos: [MIUI DEVICE TEAM] Good News! Mi PC Suite 3.0 Beta Released! ENGLISH Translated! - Mi MIX - Xiaomi MIUI Official Forum

link de como utilizarlo: [Device Team] A Quick Walkthrough of Latest Mi PC Suite 3.0 Beta (China Ver.)! - Redmi 4/Prime - Xiaomi MIUI Official Forum

[Franky_36]

Originally Posted by DUSKnenixs

not dead, use tespoint, and update last version, phone are not dead, the problem is that, no solution now for Mi account for some type of xiaomi, my helium become dead, alive, dead, alive and so on, now is alive because with last version and tespoint you can recover always the phone.

bom ver malta tuga aqui

Originally Posted by fcporto

Hi again. i really don't understand what you mean by this. Sorry, but i'm starting to think this is a bot or something for you to say always "good" and to "coment". i'm not going nowhere with this and phone is bricked now. is it so hard to make an explanation on what really steps should be done????
what miracle crack? all miracle cracks i find are youtube videos with links to nowhere. what you mean "my flash" mode edl? thats what i've been doing all the time and path leads to nothing....
would not be easy to leave links with programs to do job and step by step turotial???? How come you keep saying "good" if the phone is dead now???? i dont understand.....

Hi, I leave you two links, one is the program mipcsuite3.0 in which it automatically detects the appropriate firmware according to the model of xiaomi that you have, just follow the steps as install and translate to English and another link on how to use it, I hope that Serve and forgive the delay in answering since I have a lot of work and it has been impossible for me to answer, thank you.

link del programa seguid los pasos: [MIUI DEVICE TEAM] Good News! Mi PC Suite 3.0 Beta Released! ENGLISH Translated! - Mi MIX - Xiaomi MIUI Official Forum

link de como utilizarlo: [Device Team] A Quick Walkthrough of Latest Mi PC Suite 3.0 Beta (China Ver.)! - Redmi 4/Prime - Xiaomi MIUI Official Forum