Successfully unlocked/repaired phones by Infinity-Box - Page 1732 - GSM-Forum

saeedullah_khan · 09-29-2015, 16:26

Code:

Chinese Miracle II  [SPD module] v 1.05

Start  at : [9/29/2015 / 4:01:07 PM]
Operation : Read PatternLock [ v1.05 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 46 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC5735 Generic eMMC Loader v1.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

Reading PatternLock ... 
Read Ok , decrypt
PatternLock Sequence : 1236598

Done!

Elapsed: 00:00:24

Reconnect Power/Cable!

Finish at : [9/29/2015 / 4:01:31 PM]

saeedullah_khan · 09-29-2015, 16:59

Code:

Start  at : [9/29/2015 / 2:57:10 PM]
Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100523832314D4200B60FDEEA520B
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BM128
[eMMC] : FLASH_CID : 150100523832314D4200B60FDEEA520B
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : QMobile
ProdName  : d5110_qmobile
ProdModel : QMobile X700i
Device    : d5110_qmobile
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_RGK6580.WE.L_P2

[Read Ok] : preloader_d5110_qmobile.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / d5110_qmobile / EMMC
FW Size : 2552 MiB
Scatter saved to : C:\Documents and Settings\SAEED\Desktop\MT6580__QMobile__QMobile X700i__d5110_qmobile__5.1__ALPS.L1.MP6.V2_RGK6580.WE.L_P2\

All done!

Done!
Elapsed: 00:11:05
Reconnect Power/Cable!

Finish at : [9/29/2015 / 3:08:16 PM]



Finish at : [9/29/2015 / 3:09:56 PM]

Code:

Start  at : [9/29/2015 / 3:09:38 PM]
Operation : Read NVRAM [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6580
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6580_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100523832314D4200B60FDEEA520B
DA Stat : v4.2 on BBID : 0x94
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BM128
[eMMC] : FLASH_CID : 150100523832314D4200B60FDEEA520B
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6580_S00_D5110_QMOBILE_G4_W5_MP_V0_0_4_S150701_1_wg_n
Read Ok, MT6580_S00_D5110_QMOBILE_G4_W5_MP_V0_0_4_S150701_1_wg_n_eMMC.spnv saved

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

partycrasher131 · 09-29-2015, 17:49

mt 6577 firmware read done

Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A14CE7892089
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

MT657x Old CPU : Skip Initial Info read

[Image Ok] : preloader_mobitek77_m01_ics2.bin
[Image Ok] : DSP_BL
[Image Ok] : MBR
[Image Ok] : EBR1
[Image Ok] : lk.bin
[Image Ok] : boot.img
[Image Ok] : recovery.img
[Image Ok] : secro.img
[Image Ok] : logo.bin
[Image Ok] : system.img
[Image Ok] : cache.img
[Image Ok] : userdata.img

Brand : Karbonn
ProdName : mobitek77_m01_ics2
ProdModel : Karbonn A30
Device : mobitek77_m01_ics2
AndroidVer: 4.0.4
MTKxCPU : MT6577
MTKxPRJ : ALPS.ICS2.MP.V1.18

[ScatCFG] : MT6577 / V1.0.0 / mobitek77_m01_ics2 / EMMC
FW Size : 487 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6577__Karbonn__Karbo nn A30__mobitek77_m01_ics2__4.0.4__ALPS.ICS2.MP.V1.18 \

All done!

Done!
Elapsed: 00:03:57
Reconnect Power/Cable!

Bazeed_khan17 · 09-29-2015, 17:50

X6i 3G SPD phone logo hang Solve by formate

Formate logs:-

Code:

 Operation : Format File System [ v1.05 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Generic Loader NAND v1.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected NAND Flash , Structure detect Ok!

Formatting NAND Flash
Format UserData
Format Ok!
Format Cache
Format Ok!

Done!

Elapsed: 00:00:19

Reconnect Power/Cable!

Bazeed_khan17 · 09-29-2015, 17:51

Q X6i 3G SPD phone logo hang Solve by formate

Formate logs:-

Code:

 Operation : Format File System [ v1.05 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Generic Loader NAND v1.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected NAND Flash , Structure detect Ok!

Formatting NAND Flash
Format UserData
Format Ok!
Format Cache
Format Ok!

Done!

Elapsed: 00:00:19

Reconnect Power/Cable!

Bazeed_khan17 · 09-29-2015, 17:53

Q A300pattren read out

Logs:-

Code:

 Operation : Read PatternLock [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048601A30D5141C1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A30D5141C1
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 
FS Size : 1499 MiB
Magic Ok
Mount point  : /data

Get PatternLock ...
PatternLock Sequnce : 3214586

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

Bazeed_khan17 · 09-29-2015, 17:55

Q E95 imei repair

Code:

  Operation : Repair Security [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 13 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 1E7B77E5EBB67C9CE02BF2529887FB79
BROM Protocol Version : 05
Setting Service Mode ...
Init Ok, waiting for phone ...
Phone Initial Info : 
BB : MT6260
SW : 2300QM_0301_V0991
HW : GIONEE60A_11B_HW
IMEI[1] read error
IMEI[2] info not exist
Update IMEI[1] to : 357564759877800
Update IMEI[2] to : 357576598789798
Done!

Done!
Elapsed: 00:01:05
Reconnect Power/Cable!

Naps · 09-30-2015, 06:43

Operation : Format FileSystem [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 99 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00EC00BC00000055005400EC00BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0083 , [SAMSUNG] KA100O015B_BJTT
[NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

syed tuqeer · 09-30-2015, 06:47

Code:

Connect phone on selected interface...

Core : v2.11 , MTKx FlashEngine : v8.5

Verify files ... 
MAUI : RM-1011_ROM_eMP_20.10.11
VIVA : RM-1011_VIVA_eMP_20.10.11
LANG : RM-1011_LANG_PACK_ROM_IJ_eMP_20.10.11_002
CUST : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.10.11_002
JMPT : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_20.10.11_002
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 51 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : BDAE63D056BBCC68EB0CF7BC89F3C3CA
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000 
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
SecureDecrypt : RM-1011_ROM_eMP_20.10.11
SecureDecrypt : RM-1011_VIVA_eMP_20.10.11
SecureDecrypt : RM-1011_LANG_PACK_ROM_IJ_eMP_20.10.11_002
SecureDecrypt : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.10.11_002
SecureDecrypt : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_20.10.11_002
OVRLP : 000069B900000001
PHPID : PEARL.10.01.11.p2
 === Backup Enabled
Reading RPL backup...
Control Block Validation (Security Test) : 
CBR is Ok, match with BB SN. Phone Security is Alive :)
Mobile Info : 
IMEI  : 352353063845025
BBUID : BDAE63D056BBCC68EB0CF7BC89F3C3CA
SimLock Info : 
STATE : OPENED ( NOT LOCKED )
RPL Saved to : 352353063845025_MTK.mtsec
 === Backup 
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
ERASE_MAUI_INFO : 0x00040000
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1011_ROM_eMP_20.10.11
Write : RM-1011_LANG_PACK_ROM_IJ_eMP_20.10.11_002
Write : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.10.11_002
Write : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_20.10.11_002
Write : RM-1011_VIVA_eMP_20.10.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1011_ROM_eMP_20.10.11
[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IJ_eMP_20.10.11_002
[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_20.10.11_002
[VERIFY] DONE : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_20.10.11_002
[VERIFY] DONE : RM-1011_VIVA_eMP_20.10.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:02:56
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:     Error
IMEI:  Error
Ape Version: Error
PPM version :   Error
Product code:  Error
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
Read Info Done!

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok


Reading Phone Info....
Software ver : 20.10.11 00-00-00 RM-1011
IMEI 1  :      352353063845025
IMEI 2  :      352353063845033
XappVer :      0000083E
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM     :      IJ
CNT     :      PEARL.20.10.11.p1
Product SN   :     6321A2CBH
Product code :     059V6J5
Base Prd.code:     059V3X9
Module code  :     0206023
Hardware info=======
HWID  : 1000
LCDVer: TPO
Lock info ===========
IMEI       : 352353063845025
IMEI spNet : 3A 25 53 03 36 48 05 52 

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

SimLock status : Ok
Security status : Ok

Done!

Phone disconected!

Connect phone on selected interface...

BISMILLAH MOBILES · 09-30-2015, 07:23

Samsung Galaxy win GT-I8552 MT6575 All Operation Logs:

Read Info:
Card found : S/N :
Chinese Miracle II [MTK module] v 1.32

Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : A00SJ
[eMMC] : FLASH_CID : 150100534A533030410315FE2A518081
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x00000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

ProdName : GT-I8552
ProdModel : GT-I8552
Device : GT-I8552
AndroidVer: 4.1.2
MTKxCPU : MT6575
MTKxPRJ : ALPS.JB.MP.V1.16

MODEM :
BaseBand : MT6575_S01_MAUI_11AMD_W12_22_SP_V23

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

Read Flash File:
Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : A00SJ
[eMMC] : FLASH_CID : 150100534A533030410315FE2A518081
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

MT657x Old CPU : Skip Initial Info read

[Image Ok] : preloader_hexing75_jb.bin
[Image Ok] : DSP_BL
[Image Ok] : MBR
[Image Ok] : EBR1
[Image Ok] : lk.bin
[Image Ok] : boot.img
[Image Ok] : recovery.img
[Image Ok] : secro.img
[Image Ok] : logo.bin
[Image Ok] : EBR2
[Image Ok] : system.img
[Image Ok] : cache.img
[Image Ok] : userdata.img

ProdName : GT-I8552
ProdModel : GT-I8552
Device : GT-I8552
AndroidVer: 4.1.2
MTKxCPU : MT6575
MTKxPRJ : ALPS.JB.MP.V1.16

[ScatCFG] : MT6575 / V1.0.0 / hexing75_jb / EMMC
FW Size : 435 MiB
Scatter saved to : C:\Users\Mobile Shop\Desktop\MT6575___GT-I8552__GT-I8552__4.1.2__ALPS.JB.MP.V1.16\

All done!

Done!
Elapsed: 00:05:33
Reconnect Power/Cable!
Read NVRM:
Operation : Read NVRAM [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : A00SJ
[eMMC] : FLASH_CID : 150100534A533030410315FE2A518081
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6575_S01_MAUI_11AMD_W12_22_SP_V23
Read Ok, MT6575_S01_MAUI_11AMD_W12_22_SP_V23_eMMC.spnv saved

Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
Repair Security Done Permanently Verified with Restore all And Hard Reset:
Operation : Repair Security [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : A00SJ
[eMMC] : FLASH_CID : 150100534A533030410315FE2A518081
[eMMC] : FLASH_EXT : 00100000/00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Set IMEI [00] : 3558XXXXXXXXXX
Set IMEI [01] : 3558XXXXXXXXXX
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 9 ]
Sync...
PostCheck Ok! Repair done!

Done!
Elapsed: 00:00:35
Reconnect Power/Cable!

THE CREDIT GOES TO INFINITY TEAM:

Nasir Mobiles · 09-30-2015, 08:05

HTC M8 CHINA COPY FACTORY FIRMWARE READ DONE:-

Code:

Operation : Read Flash [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E3958524D42001421DEA851FB
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D42001421DEA851FB
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : alps
ProdName  : mbk72_wet_lca
ProdModel : mbk72_wet_lca
Device    : mbk72_wet_lca
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_mbk72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_lca / EMMC
FW Size : 422 MiB
Scatter saved to : F:\Firmware\MT6572__alps__mbk72_wet_lca__mbk72_wet_lca__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:02:46
Reconnect Power/Cable!

syed tuqeer · 09-30-2015, 08:05

ZTE V795(EMMC)

Code:

Operation : Check / Read Info [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048600A3E28EC09D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048600A3E28EC09D
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!

Code:

Operation : Format FileSystem [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048600A3E28EC09D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048600A3E28EC09D
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

rehmani · 09-30-2015, 08:23

Code:

Operation : Format FileSystem [ v1.32 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 57 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00AD00BC00900055005600AD00BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x009A , [Hynix] H9TA4GH2GDMCPR
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

ij_cell · 09-30-2015, 09:18

Nokia 6300 Flash Done.

Connect phone on selected interface...

Core : v2.11 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm217__07.30.mcusw
PPM : rm217__07.30.ppm_r
CNT : rm217__07.30.image_ctv_cn_black
Flashing phone now...
[Gen] Rules accepted for : RAP3x Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006010C192101001101
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 1830001169568C569D11BA184BF82399B6FBDFB0
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
===Flashing [MCU]===
Erase : Processing rm217__07.30.mcusw
Found 9 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
Result: 0000
Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
Result: 0000
Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
Result: 0000
Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
Result: 0000
Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:43
Write : Processing rm217__07.30.mcusw
Total 944 [944/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PMM_CONF]
CMT : Writing Hash CERT [SBIF_CONF]
TIME : Write time : 00:01:24
MCU Write done
===Flashing [PPM]===
Erase : Processing rm217__07.30.ppm_r
Found 1 areas to erase
Erasing area 0x01080000 - 0x015FFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:11
Write : Processing rm217__07.30.ppm_r
Total 329 [329/0/0] blocks to write, writing...
TIME : Write time : 00:00:31
PPM Write done
===Flashing [CNT]===
Erase : Processing rm217__07.30.image_ctv_cn_black
Found 1 areas to erase
Erasing area 0x01600000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:27
Checking content info...
Resetting phone...
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm217__07.30.image_ctv_cn_black
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Loader len: 248320, CHK: 36E3
ADL -> Sending loader...
Reset connection...
ADL : Check data
ADL : Data accepted
Write : Processing rm217__07.30.image_ctv_cn_black_128
Total 296 [296/0/0] blocks to write, writing...
TIME : Write time : 00:00:25
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:03:43
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6300
Software Info: V 07.30 07-05-09 RM-217 (c) Nokia.
IMEI: 357999037613389
PPM version : V 07.30 07-05-09 RM-217 (c) Nokia. R
Product code: 0547951
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 0 certs
Uploading User Certificates...
Uploaded 26 certs!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:05:18

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

ij_cell · 09-30-2015, 09:19

Nokia X2-01 Flash Done.

Connect phone on selected interface...

Core : v2.11 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm709__08.71 (1).mcusw
PPM : rm709__08.71 (2).ppm_mh1
CNT : rm709__08.71.image_mh1_059H1K8
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000000000000022000509200C0000
CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
EM0 ID: 00005361
PUBLIC ID: 0000000000274B9C6A543BE2D7D323E34D6E7A5B
ASIC MODE ID: 00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID: DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!

TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 37955B6FC432998EF0DB240E332228384D19ED09
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352426057514540
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352426057514540_CR T.rpl

=== SW Version Check ===
- > UPGRADE
=== SW Version Check ===

===Flashing [MCU]===
Erase : Processing rm709__08.71 (1).mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm709__08.71 (1).mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 504 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [PPM]===
Erase : Processing rm709__08.71 (2).ppm_mh1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm709__08.71 (2).ppm_mh1
Total writen 120 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [CNT]===
Erase : Processing rm709__08.71.image_mh1_059H1K8
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm709__08.71.image_mh1_059H1K8
Total writen 438 blocks
TIME : Write time : 00:00:04
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:13
Reboot phone now...

Reading Phone Info....
Connected phone - X2-01
Software Info: V 08.71 15-11-11 RM-709 (c) Nokia
IMEI: 352426057514540
PPM version : V 08.71 15-11-11 RM-709 (c) Nokia MH1
Product code: 059G5M5
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 39 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

09-29-2015, 17:49	#25968 (permalink)
partycrasher131 Freak Poster Join Date: Apr 2008 Location: World of technology Posts: 387 Member: 749754 Status: Offline Sonork: partycrasher131 Thanks Meter: 134	karboon a30 mt6577 firmware reading mt 6577 firmware read done Operation : Read Flash [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 13 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8B00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575\|MT6577_S00 Processing BROM stage i2c Init : 0300771F SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0090 , OEM : 014A [eMMC] : FLASH_INF : HYNIX [eMMC] : FLASH_CID : 90014A2058494E594816A14CE7892089 [eMMC] : FLASH_EXT : 00200000/00200000 [eMMC] : FLASH_LEN : 0x00000000E7000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... MT657x Old CPU : Skip Initial Info read [Image Ok] : preloader_mobitek77_m01_ics2.bin [Image Ok] : DSP_BL [Image Ok] : MBR [Image Ok] : EBR1 [Image Ok] : lk.bin [Image Ok] : boot.img [Image Ok] : recovery.img [Image Ok] : secro.img [Image Ok] : logo.bin [Image Ok] : system.img [Image Ok] : cache.img [Image Ok] : userdata.img Brand : Karbonn ProdName : mobitek77_m01_ics2 ProdModel : Karbonn A30 Device : mobitek77_m01_ics2 AndroidVer: 4.0.4 MTKxCPU : MT6577 MTKxPRJ : ALPS.ICS2.MP.V1.18 [ScatCFG] : MT6577 / V1.0.0 / mobitek77_m01_ics2 / EMMC FW Size : 487 MiB Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6577__Karbonn__Karbo nn A30__mobitek77_m01_ics2__4.0.4__ALPS.ICS2.MP.V1.18 \ All done! Done! Elapsed: 00:03:57 Reconnect Power/Cable!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17

09-30-2015, 06:43	#25973 (permalink)
Naps Freak Poster Join Date: Sep 2014 Location: philippines Posts: 205 Member: 2256970 Status: Offline Thanks Meter: 67	Operation : Format FileSystem [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 99 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6571 BB_CPU_HW : CA00 BB_CPU_SW : 8D00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6571_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00EC00BC00000055005400EC00BC0000 eMMC_ID : 00000000000000000000000000000000 DA Stat : v4.2 on BBID : 0x8B DA Sent. Configure setting now ... DA started successuflly NAND FlashIC initialized [NAND] : FLASH_VEN : 0x0083 , [SAMSUNG] KA100O015B_BJTT [NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC [NAND] : FLASH_LEN : 0x20000000 [NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Clear USERDATA Clear Ok! Clear CACHE Clear Ok! Done! Elapsed: 00:00:14 Reconnect Power/Cable!

09-30-2015, 07:23	#25975 (permalink)
BISMILLAH MOBILES No Life Poster Join Date: Oct 2007 Location: In My Limit Posts: 1,296 Member: 610502 Status: Offline Sonork: 100.1618428 Thanks Meter: 161	Samsung Galaxy win GT-I8552 MT6575 All Operation Logs: Read Info: Card found : S/N : Chinese Miracle II [MTK module] v 1.32 Operation : Check / Read Info [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 7 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575\|MT6577_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0xFE SecCfgVal : 0x00000000 BromVersion : 0x05 BLVersion : 0xFE Preloader Status : Not active (Erased) Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : A00SJ [eMMC] : FLASH_CID : 150100534A533030410315FE2A518081 [eMMC] : FLASH_EXT : 00100000/00020000 [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x00000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! ProdName : GT-I8552 ProdModel : GT-I8552 Device : GT-I8552 AndroidVer: 4.1.2 MTKxCPU : MT6575 MTKxPRJ : ALPS.JB.MP.V1.16 MODEM : BaseBand : MT6575_S01_MAUI_11AMD_W12_22_SP_V23 Done! Elapsed: 00:00:14 Reconnect Power/Cable! Read Flash File: Operation : Read Flash [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 9 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575\|MT6577_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : A00SJ [eMMC] : FLASH_CID : 150100534A533030410315FE2A518081 [eMMC] : FLASH_EXT : 00100000/00020000 [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... MT657x Old CPU : Skip Initial Info read [Image Ok] : preloader_hexing75_jb.bin [Image Ok] : DSP_BL [Image Ok] : MBR [Image Ok] : EBR1 [Image Ok] : lk.bin [Image Ok] : boot.img [Image Ok] : recovery.img [Image Ok] : secro.img [Image Ok] : logo.bin [Image Ok] : EBR2 [Image Ok] : system.img [Image Ok] : cache.img [Image Ok] : userdata.img ProdName : GT-I8552 ProdModel : GT-I8552 Device : GT-I8552 AndroidVer: 4.1.2 MTKxCPU : MT6575 MTKxPRJ : ALPS.JB.MP.V1.16 [ScatCFG] : MT6575 / V1.0.0 / hexing75_jb / EMMC FW Size : 435 MiB Scatter saved to : C:\Users\Mobile Shop\Desktop\MT6575___GT-I8552__GT-I8552__4.1.2__ALPS.JB.MP.V1.16\ All done! Done! Elapsed: 00:05:33 Reconnect Power/Cable! Read NVRM: Operation : Read NVRAM [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 9 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575\|MT6577_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : A00SJ [eMMC] : FLASH_CID : 150100534A533030410315FE2A518081 [eMMC] : FLASH_EXT : 00100000/00020000 [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [Info] : BaseBand : MT6575_S01_MAUI_11AMD_W12_22_SP_V23 Read Ok, MT6575_S01_MAUI_11AMD_W12_22_SP_V23_eMMC.spnv saved Done! Elapsed: 00:00:20 Reconnect Power/Cable! Repair Security Done Permanently Verified with Restore all And Hard Reset: Operation : Repair Security [ v1.32 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 9 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575\|MT6577_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : A00SJ [eMMC] : FLASH_CID : 150100534A533030410315FE2A518081 [eMMC] : FLASH_EXT : 00100000/00020000 [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Set IMEI [00] : 3558XXXXXXXXXX Set IMEI [01] : 3558XXXXXXXXXX Prepare finished. Security check required! Wait for phone... Phone found! [ 9 ] Sync... PostCheck Ok! Repair done! Done! Elapsed: 00:00:35 Reconnect Power/Cable! *THE CREDIT GOES TO INFINITY TEAM:*

09-30-2015, 09:18	#25979 (permalink)
ij_cell No Life Poster Join Date: May 2013 Location: TkinterPy,Hex Cal,Ext2,Ext4, Posts: 4,540 Member: 1937038 Status: Offline Sonork: QQ 2045657399 Thanks Meter: 4,492	Nokia 6300 Flash Done. Connect phone on selected interface... Core : v2.11 , BB5XG FlashEngine : v9.9 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm217__07.30.mcusw PPM : rm217__07.30.ppm_r CNT : rm217__07.30.image_ctv_cn_black Flashing phone now... [Gen] Rules accepted for : RAP3x Generation Check files done... -> SWversion check skipped : Dead mode selected Getting product info... Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response. ASIC ID: 000000010000022600010006010C192101001101 CPU ID : RAP3Gv3 , Features : No any extended features RAP_PUB: 1830001169568C569D11BA184BF82399B6FBDFB0 CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing UPDAPP... Processing PASUBTOC... TIME : Boot time : 00:00:05 Reopening the connection... Waiting for response: 30 Waiting for response: 29 Waiting for response: 28 Waiting for response: 27 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Check data ADL : Data accepted ===Flashing [MCU]=== Erase : Processing rm217__07.30.mcusw Found 9 areas to erase Erasing area 0x00000000 - 0x000006BF, NOR, CMT Result: 0000 Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT Result: 0000 Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT Result: 0000 Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT Result: 0000 Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT Result: 0000 Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT Result: 0000 Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT Result: 0000 Erasing area 0x01060000 - 0x01067FFF, NOR, CMT Result: 0000 Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:43 Write : Processing rm217__07.30.mcusw Total 944 [944/0/0] blocks to write, writing... CMT : Writing Hash CERT [NOLO] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [UPDAPP] CMT : Writing Hash CERT [DSP0] CMT : Writing Hash CERT [MCUSW] CMT : Writing Hash CERT [PMM_CONF] CMT : Writing Hash CERT [SBIF_CONF] TIME : Write time : 00:01:24 MCU Write done ===Flashing [PPM]=== Erase : Processing rm217__07.30.ppm_r Found 1 areas to erase Erasing area 0x01080000 - 0x015FFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:11 Write : Processing rm217__07.30.ppm_r Total 329 [329/0/0] blocks to write, writing... TIME : Write time : 00:00:31 PPM Write done ===Flashing [CNT]=== Erase : Processing rm217__07.30.image_ctv_cn_black Found 1 areas to erase Erasing area 0x01600000 - 0x01FDFFFF, NOR, CMT Result: 0000 TIME : Erase time : 00:00:27 Checking content info... Resetting phone... Checking CNT sector PN<>FL PN CNT sector : 128 kb ConvertImage: Processing rm217__07.30.image_ctv_cn_black ConvertImage: Page Size is 64K, converting... ConvertImage: File converted Loader len: 248320, CHK: 36E3 ADL -> Sending loader... Reset connection... ADL : Check data ADL : Data accepted Write : Processing rm217__07.30.image_ctv_cn_black_128 Total 296 [296/0/0] blocks to write, writing... TIME : Write time : 00:00:25 CNT Write done ADL : End flashing Flashing done! Total flash time : 00:03:43 Reboot phone now... Reading Phone Info.... Connected phone - Nokia 6300 Software Info: V 07.30 07-05-09 RM-217 (c) Nokia. IMEI: 357999037613389 PPM version : V 07.30 07-05-09 RM-217 (c) Nokia. R Product code: 0547951 Wait, when phone will be ready ... Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Processing After Flash Defaults... FullFactorySet... Ok! UserDataDefaultsSet...OK! ServiceDefaultsSet... Ok! LeaveDefaultsSet... Ok! ProductTuneSet...OK! SwUpgradeSet...OK! Check and Upload User Certificates ... Total - 0 certs Uploading User Certificates... Uploaded 26 certs! Battery voltage is enough for start AfterFlash operations done ;D Done! Elapsed: 00:05:18 Connect phone on selected interface... Phone found! Series 40 Device detected! read info... - Ok

09-30-2015, 09:19	#25980 (permalink)
ij_cell No Life Poster Join Date: May 2013 Location: TkinterPy,Hex Cal,Ext2,Ext4, Posts: 4,540 Member: 1937038 Status: Offline Sonork: QQ 2045657399 Thanks Meter: 4,492	Nokia X2-01 Flash Done. Connect phone on selected interface... Core : v2.11 , BB5XG FlashEngine : v9.9 Selected FlashSettings : Manual Check FlashFiles, Please, wait... Files Set for Flashing : MCU : rm709__08.71 (1).mcusw PPM : rm709__08.71 (2).ppm_mh1 CNT : rm709__08.71.image_mh1_059H1K8 Flashing phone now... [Gen] Rules accepted for : RAPUxx Generation Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Insert cable and charger or press phone's power button! --- Connection opened successfully Waiting for communication response... [BootRom] : 1st boot Ok! ASIC ID: 000000000000000022000509200C0000 CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB EM0 ID: 00005361 PUBLIC ID: 0000000000274B9C6A543BE2D7D323E34D6E7A5B ASIC MODE ID: 00 ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E ROM ID: DE56D582BDDE7A3A Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0 Processing RAWLOADER... FLIC : 00300020 Req : XSR 1.6 Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0 Processing PASUBTOC ... Processing ALG ... Boot Done! TIME : Boot time : 00:00:01 Reopening the connection... Waiting for response: 30 ADL: Check mode Select ASIC [C900] PAPUBkeys : 37955B6FC432998EF0DB240E332228384D19ED09 ADL: phone is in flash mode Backup enabled, will read all certificates... Reading NPC certificate... IMEI : 352426057514540 Reading CCC certificate... Reading HWC certificate... Reading R&D certificate... Reading VARIANT certificate... Reading PARTNERC certificate... Reading MDM_KEYS certificate... NPC Certificate saved... CCC Certificate saved... HWC Certificate saved... RPL saved : C:\InfinityBox\BEST\Backup\Cert\352426057514540_CR T.rpl === SW Version Check === - > UPGRADE === SW Version Check === ===Flashing [MCU]=== Erase : Processing rm709__08.71 (1).mcusw Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm709__08.71 (1).mcusw CMT: Writing Hash CERT [KEYS] CMT: Writing Hash CERT [ADA] CMT: Writing Hash CERT [PRIMAPP] CMT: Writing Hash CERT [RAP3NAND] CMT: Writing Hash CERT [PASUBTOC] CMT: Writing Hash CERT [PAPUBKEYS] CMT: Writing Hash CERT [UPDAPP] CMT: Writing Hash CERT [MCUSW] CMT: Writing Hash CERT [MCUSW1] CMT: Writing Hash CERT [GENIO_INIT] CMT: Writing Hash CERT [ISA+DYNSW] Total writen 504 blocks TIME : Write time : 00:00:05 MCU Write done ADL: Request programm status NAND status : 00000004 / 00000004 / 00000000 ===Flashing [PPM]=== Erase : Processing rm709__08.71 (2).ppm_mh1 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:00 Write : Processing rm709__08.71 (2).ppm_mh1 Total writen 120 blocks TIME : Write time : 00:00:01 PPM Write done ADL: Request programm status NAND status : 00000004 / 00000004 / 00000000 ===Flashing [CNT]=== Erase : Processing rm709__08.71.image_mh1_059H1K8 Partitioning.... Partitioning Ok... Erasing.... Erasing Ok... TIME : Erase time : 00:00:01 Write : Processing rm709__08.71.image_mh1_059H1K8 Total writen 438 blocks TIME : Write time : 00:00:04 CNT Write done ADL: Request programm status NAND status : 00000004 / 00000004 / 00000000 ADL: Close_Session Content: 000300000000040000000400000000 ADL: Reboot Flashing done! Total flash time : 00:00:13 Reboot phone now... Reading Phone Info.... Connected phone - X2-01 Software Info: V 08.71 15-11-11 RM-709 (c) Nokia IMEI: 352426057514540 PPM version : V 08.71 15-11-11 RM-709 (c) Nokia MH1 Product code: 059G5M5 Wait, when phone will be ready ... Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Processing After Flash Defaults... FullFactorySet... Ok! UserDataDefaultsSet...OK! ServiceDefaultsSet... Ok! LeaveDefaultsSet... Ok! ProductTuneSet...OK! SwUpgradeSet...OK! Check and Upload User Certificates ... Total - 39 certs Certificates found, skip upload ... Battery voltage is enough for start AfterFlash operations done ;D Done!