GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-19-2019, 13:44   #59176 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
WE L4 Firmware Read Done By CM2


xGPT : Normalize settings Ok!

Brand : WE
ProdName : WE L3
ProdModel : WE L4
Device : t223_wh_WHL4
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.39_along6580.we.m_P12

[Read Ok] : preloader_t223_wh_whl4.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / t223_wh_whl4 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1844 MiB
Scatter saved to : \MT6580__WE__WE_L4__t223_wh_WHL4__6.0__alps-mp-m0.mp1-V2.39_along6580.we.m_P12\

All done!

  Reply With Quote
Old 06-19-2019, 13:46   #59177 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: ISI
Posts: 2,713
Member: 2644066
Status: Offline
Thanks Meter: 864
Qmobile power 4000 hang on logo done by cm2

Card found : 73CA70CC , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]


SPRD mode : SC6531 : REV : 0000 : NOR : [ 4MB ]

Operation : Identify [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] :
IMEI[2] :

Done!
Elapsed: 00:00:14

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.04 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_058 97CF81D53_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:17

Reconnect Power/Cable!
  Reply With Quote
Old 06-19-2019, 13:48   #59178 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
We R2 Frimware Read Done By CM2

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WE
ProdName : R2
ProdModel : R2
Device : R2
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : KAAR5_BGK_En_1.02.804

[Read Ok] : preloader_konka_6737_r5_65_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / konka_6737_r5_65_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3062 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\GSM\MT6737M__WE__R2 __R2__6.0__KAAR5_BGK_En_1.02.804\

All done!
  Reply With Quote
Old 06-19-2019, 13:49   #59179 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
WE R3 Firmware Read Done By CM2

Reading Flash Content now ...

Brand : WE
ProdName : t530_dg_a54_bengal
ProdModel : WE R3
Device : t530_dg_a54_bengal
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_wtk6580.we.m

[Read Ok] : preloader_t530_dg_a54_bengal.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / t530_dg_a54_bengal / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2380 MiB
Scatter saved to : \MT6580__WE__WE_R3__t530_dg_a54_bengal__6.0__alps-mp-m0.mp1-V2.34_wtk6580.we.m\

All done!
  Reply With Quote
Old 06-19-2019, 13:53   #59180 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
We T1 Frimware Read Done By CM2

Wait for phone...
Phone found! [ 64 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4500017045453848DD130138474D35F9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 8EE8H
[eMMC] : FLASH_CID : 7001004548384545380113DDF9354447
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0x605BA6A71E8BCB6E1C2F39D0E0B21860
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WE
ProdName : WE_T1
ProdModel : T1
Device : WE_T1
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.0.2_esky6737m.35.n

[Read Ok] : preloader_esky6737m_35_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / esky6737m_35_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3160 MiB
Scatter saved to : F:\I D M\MT6737M__WE__T1__WE_T1__7.0__alps-mp-n0.mp1-V1.0.2_esky6737m.35.n\

All done!

Done!
Elapsed: 00:06:48
Reconnect Power/Cable!
  Reply With Quote
Old 06-19-2019, 13:54   #59181 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
We V1 Firmware Read Done By CM2

Reading Flash Content now ...

Brand : WE
ProdName : V1
ProdModel : V1
Device : zechin6582_wt_l
AndroidVer: 5.0.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.L0.MP2.V1.15_ZECHIN6582.WT.L_P26

[Read Ok] : preloader_zechin6582_wt_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / zechin6582_wt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2100 MiB
Scatter saved to : C:\MT6582__WE__V1__zechin6582_wt_l__5.0.2__ALPS.L0 .MP2.V1.15_ZECHIN6582.WT.L_P26\

All done
  Reply With Quote
Old 06-19-2019, 13:55   #59182 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
WE V2 Frimware Read Done By CM2

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WE
ProdName : V2
ProdModel : V2
Device : WE
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : S521-BD-WE-V1.5_20160624

[Read Ok] : preloader_aeon6580_we_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / aeon6580_we_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2557 MiB
Scatter saved to : \MT6580__WE__V2__WE__6.0__S521-BD-WE-V1.5_20160624\

All done!
  Reply With Quote
Old 06-19-2019, 13:57   #59183 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Winstar S5 Firmware Read Done By CM2

> Wait phone connected ...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : ts28b_s5010d_winstar
Model Brand : Winstar
Model Device: ts28b_s5010d
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : TS28B_HN_S5010D_HD_8P8_6.0_BAND1_WINSTAR_V03_20161 027
Model Ext : Winstar S-5

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.26.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1743 MiB
Saved to : C:\Users\nobichanmaruf\Desktop\KAL\SP7731GEA_HDR_t s28b_s5010d_6.0_TS28B_HN_S5010D_HD_8P8_6.0_BAND1_W INSTAR_V03_20161027_Winstar_S-5\
Done!

Elapsed: 00:07:31

Reconnect Power/Cable!
  Reply With Quote
Old 06-19-2019, 13:59   #59184 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Winstar W888 Firmware Read Done By CM2

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000550056000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0092 , [Micron] NAND_MT29C8G96MAZBADKD_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0055 0056 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID : 0xD3510ECE36B5244E1005D37E10EAE5CD
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_s10_72_nand_ts_j17_new_winstar_h8_w888_
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / s10_72_nand_ts_j17_new_winstar_h8_w / NAND
FW Size : 256 MiB

Brand : WINSTAR
ProdName : W888
ProdModel : W888
AndroidVer: 6.0
MTKxCPU : MT6572
MTKxPRJ : MP.V1.0

Android Info saved

Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6572_NAND_WINSTAR __W888___6.0__MP.V1.0

Done!
Elapsed: 00:03:13
Reconnect Power/Cable!
  Reply With Quote
Old 06-19-2019, 14:01   #59185 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Winstar WS114 Firmware Read Done By CM2

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201AAB2CA64B111
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201AAB2CA64B111
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xF248076E6DC6FA6C997DF295EE3824B5
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Winstar
ProdName : full_dwzn
ProdModel : WS114 Lion
Device : dwzn
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18

[Read Ok] : preloader_dwzn.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / dwzn / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1573 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6580__Winstar__WS 114_Lion__dwzn__5.1__V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18\

All done!
  Reply With Quote
Old 06-19-2019, 14:03   #59186 (permalink)
Freak Poster
 
GsmServerEcuado's Avatar
 
Join Date: Oct 2018
Location: Ecuador
Age: 34
Posts: 144
Member: 2871022
Status: Offline
Sonork: BestResellerEcuador
Thanks Meter: 29
Donate money to this user
excellent work with this tool
  Reply With Quote
Old 06-19-2019, 14:04   #59187 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Wiko Fever Firmware Read Done By CM2

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065324741EB2B0705B71453C4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505072BEBC45313B7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0xD3510ECE924B9E7EB9DB263F81155453
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : WIKO
ProdName : l5460
ProdModel : FEVER
Device : l5460
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : ALPS.L1.MP3.V2.21_TINNO6753.65U.G_P53

[Read Ok] : preloader_l5460.bin
[Read Ok] : apedata.img
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6753 / V1.1.2 / l5460 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2462 MiB
Scatter saved to : C:\Users\nobichanmaruf\Desktop\MT6735__WIKO__FEVER __l5460__5.1__ALPS.L1.MP3.V2.21_TINNO6753.65U.G_P5 3\

All done!

Done!
Elapsed: 00:07:50
Reconnect Power/Cable!
  Reply With Quote
Old 06-19-2019, 14:12   #59188 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Wiko FIZZ Firmware Read Done By CM2

Reading Flash Content now ...

Brand : WIKO
ProdName : s4031a
ProdModel : FIZZ
Device : s4031a
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

[Read Ok] : preloader_s4031a.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / s4031a / EMMC
Android Info saved
HWConfig Info saved
FW Size : 668 MiB
Scatter saved to : \MT6572__WIKO__FIZZ__s4031a__4.2.2__ALPS.JB3.MP.V1 \

All done!
  Reply With Quote
Old 06-19-2019, 14:44   #59189 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Wiko Lenny3 Frimware Read Done By CM2

Reading Flash Content now ...

Brand : WIKO
ProdName : V3702AN
ProdModel : LENNY3
Device : V3702AN
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.W10.24.p0

[Read Ok] : preloader_v3702.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : ewdata.img
[Read Ok] : apedata.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3702 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2110 MiB
Scatter saved to : MT6580__WIKO__LENNY3__V3702AN__6.0__ALPS.W10.24.p0

All done
  Reply With Quote
Old 06-19-2019, 14:45   #59190 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 3,009
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 354
Wiko R7 Frimware Read Done By CM2

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : alps
ProdName : full_magc6580_we_l
ProdModel : R7
Device : magc6580_we_l
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_MAGC6580.WE.L_P35

[Read Ok] : preloader_magc6580_we_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_we_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1511 MiB
Scatter saved to : \MT6580__alps__R7__magc6580_we_l__5.1__ALPS.L1.MP6 .V2_MAGC6580.WE.L_P35\

All done!


  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 16:14
news headlines to gsm phone mos Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 7 05-22-2016 11:42
my 8810 is phone locked ,can somebody please help duyphuc Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 18 12-23-2014 08:03
need software for 5161 by cable mln2000 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 08-29-2010 20:17

 



All times are GMT +1. The time now is 02:57.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.66268 seconds with 9 queries

SEO by vBSEO