post me your problem in motorola and let me give you the rite solution - Page 4 - GSM-Forum

chocco · 10-17-2006, 10:04

My 9 year old daughter has come home with a set of replacement housings for her Motorola E365, can anyone tell me how to remove the factory fitted ones?? Can remove the battery cover easy enough but where do I go from there?? Looks as if it could be cheaper to buy a new PINK phone!!!! Any help or info you can offer would be greatly appreciated.

sunlov · 10-18-2006, 01:00

C650 not charging ): , any solution with you brother ? i changed battery with no success , even i pulled the charge headers and testing their voltage , everything appearing normal , i didnt opened it yet thats why im here asking for a professionnal help . Thanks in advance

realmadrid · 10-19-2006, 14:04

broblem in my l6 is invalid batrie any solution to solve this problem

waqarmunir4 · 10-19-2006, 14:11

broblem in my l6 is invalid batrie any solution to solve this problem

Solution is that when u remove it's cover shield there is any terminor is attaching with other. You should clean.

martin ndikum · 10-19-2006, 14:26

Hi good day to you.I have a motorola T180 that is death.What can I do to make it come on?

prince_shh1 · 10-19-2006, 19:42

pls any one help me for moto c 117 unlock i have smartclip but not works? If u have any software pls share with me THANKS

sheggmat · 10-19-2006, 20:22

i have v3 fell inside water after fluid and rehot it work for 4hours and went back to insert sim pls what can i do? i tried flash but not work any hardware plllllssssssssssssssss

thankx in advance

ikrash · 10-19-2006, 20:58

hello friend,
i normally unlock v3x with smart clip and it done mostely but yesterday i try to unlock the same v3x but when it shows result unlocking..ok....it give me the result firmware version i dont know to how unlock it coz i try three four times but the result the same ....have u any solution coz i am new in this field thxs

azngrl · 10-20-2006, 00:26

hi, does anybody know where i can find unlock codes for most motorola. thanks a lot

France · 10-20-2006, 17:03

Good day to you all.I've a motorola cell phone which does not come on at all,what can I do?

Chevka · 10-21-2006, 12:13

The Phone is A780 and totaly DEAD.
But if I check the ampere meter with poer supply, is definitely Software problem.
Now how could I flash the phone if the computer can not detect the flash ic?!??

now, do anybody know the testpoint for this phone??

ps: I'm using smartclip,Random Flash BackUp, MFF from PST, and RSD Lite.

ssatcom · 10-21-2006, 12:32

Quote:

Originally Posted by Chevka

The Phone is A780 and totaly DEAD.
But if I check the ampere meter with poer supply, is definitely Software problem.
Now how could I flash the phone if the computer can not detect the flash ic?!??

now, do anybody know the testpoint for this phone??

ps: I'm using smartclip,Random Flash BackUp, MFF from PST, and RSD Lite.

http:///vbb/showpo...59&postcount=7

Chevka · 10-21-2006, 12:50

Quote:

Originally Posted by ssatcom

http:///vbb/showpo...59&postcount=7

still not Help bro...

eaglemobiles · 10-21-2006, 14:29

I have changed the full housing for my Motorola V3 now the keypad is not working only power key works.

Any help please

mccm · 10-22-2006, 20:41

please show v975 buzzer ways ,phone not produce sound,ear jark ok.

measure contact from pad,under power?

it gets only half the current.

asap

10-17-2006, 10:04	#46 (permalink)
chocco Junior Member Join Date: Oct 2006 Location: South Wales Posts: 2 Member: 368474 Status: Offline Thanks Meter: 0	e365 My 9 year old daughter has come home with a set of replacement housings for her Motorola E365, can anyone tell me how to remove the factory fitted ones?? Can remove the battery cover easy enough but where do I go from there?? Looks as if it could be cheaper to buy a new PINK phone!!!! Any help or info you can offer would be greatly appreciated.

10-18-2006, 01:00	#47 (permalink)
sunlov Junior Member Join Date: Jan 2006 Posts: 7 Member: 226503 Status: Offline Thanks Meter: 0	C650 not charging ): , any solution with you brother ? i changed battery with no success , even i pulled the charge headers and testing their voltage , everything appearing normal , i didnt opened it yet thats why im here asking for a professionnal help . Thanks in advance Last edited by ..::Nokian Care®::..; 09-23-2013 at 04:49. Reason: Link removed

10-20-2006, 17:03	#55 (permalink)
France Junior Member Join Date: Sep 2004 Age: 43 Posts: 9 Member: 80153 Status: Offline Thanks Meter: 0	death motorola T180 Good day to you all.I've a motorola cell phone which does not come on at all,what can I do?

10-21-2006, 14:29	#59 (permalink)
eaglemobiles Insane Poster Join Date: Aug 2006 Posts: 95 Member: 330951 Status: Offline Thanks Meter: 8	v3 Keypads not working I have changed the full housing for my Motorola V3 now the keypad is not working only power key works. Any help please

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here any problem about Nokia keypad - key, and let me give you the solution	stefani	Nokia Repair Guide and FAQ	850	08-22-2013 12:05
Post me a problem in NOKIA and get it solved.	Shmona	Nokia Hardware & Hardware Repair	6	12-31-2007 09:17
Like allways, NsPro give you THE BEST, FASTEST and of chourse.. the REAL!!! solutions	Elco	NSPRO	73	04-25-2007 16:18

10-19-2006, 14:04	#48 (permalink)
realmadrid Freak Poster Join Date: Nov 2005 Location: in the heaven Posts: 484 Member: 201648 Status: Offline Thanks Meter: 19	broblem in my l6 is invalid batrie any solution to solve this problem

10-19-2006, 14:11	#49 (permalink)
waqarmunir4 Freak Poster Join Date: Apr 2005 Location: lahore Age: 43 Posts: 293 Member: 139020 Status: Offline Thanks Meter: 15	broblem in my l6 is invalid batrie any solution to solve this problem Solution is that when u remove it's cover shield there is any terminor is attaching with other. You should clean.

10-19-2006, 14:26	#50 (permalink)
martin ndikum Insane Poster Join Date: Jun 2006 Posts: 60 Member: 290403 Status: Offline Thanks Meter: 5	Hi good day to you.I have a motorola T180 that is death.What can I do to make it come on?

10-19-2006, 19:42	#51 (permalink)
prince_shh1 Junior Member Join Date: Oct 2006 Posts: 3 Member: 373509 Status: Offline Thanks Meter: 0	pls any one help me for moto c 117 unlock i have smartclip but not works? If u have any software pls share with me THANKS

10-19-2006, 20:22	#52 (permalink)
sheggmat Freak Poster Join Date: Mar 2006 Location: Nija Posts: 170 Member: 244008 Status: Offline Thanks Meter: 3	i have v3 fell inside water after fluid and rehot it work for 4hours and went back to insert sim pls what can i do? i tried flash but not work any hardware plllllssssssssssssssss thankx in advance

10-19-2006, 20:58	#53 (permalink)
ikrash No Life Poster Join Date: Sep 2006 Location: SPAIN Posts: 538 Member: 352041 Status: Offline Thanks Meter: 52	hello friend, i normally unlock v3x with smart clip and it done mostely but yesterday i try to unlock the same v3x but when it shows result unlocking..ok....it give me the result firmware version i dont know to how unlock it coz i try three four times but the result the same ....have u any solution coz i am new in this field thxs

10-20-2006, 00:26	#54 (permalink)
azngrl Junior Member Join Date: Oct 2006 Posts: 5 Member: 373638 Status: Offline Thanks Meter: 0	hi, does anybody know where i can find unlock codes for most motorola. thanks a lot

10-21-2006, 12:13	#56 (permalink)
Chevka No Life Poster Join Date: Sep 2004 Location: NeverL@Nd Posts: 758 Member: 82106 Status: Offline Thanks Meter: 1,208	The Phone is A780 and totaly DEAD. But if I check the ampere meter with poer supply, is definitely Software problem. Now how could I flash the phone if the computer can not detect the flash ic?!?? now, do anybody know the testpoint for this phone?? ps: I'm using smartclip,Random Flash BackUp, MFF from PST, and RSD Lite.

10-22-2006, 20:41	#60 (permalink)
mccm No Life Poster Join Date: Aug 2005 Location: singapore Age: 55 Posts: 2,430 Member: 173565 Status: Offline Thanks Meter: 71	please show v975 buzzer ways ,phone not produce sound,ear jark ok. measure contact from pad,under power? it gets only half the current. asap