Samsung Z107 UNLOCK SOLLUTION FREE - Page 3 - GSM-Forum

Nemooo · 02-14-2005, 17:01

Quote:

Originally Posted by ReviveR

Non-English posts are not allowed in any form here, sorry.

ok, then go **** yourself.

forhike · 02-14-2005, 18:18

Quote:

Originally Posted by Nemooo

ok, then go **** yourself.

hello!

it was werry kind of you to translate the posts, but pls for everyone to feel happy on this forum, watch the language

gsmlab4u · 02-14-2005, 19:11

thnaks broth, i tried to unlock z105. i made cable and tel which sw shall i use?

gsmlab4u

forhike · 02-14-2005, 20:03

Quote:

Originally Posted by gsmlab4u

thnaks broth, i tried to unlock z105. i made cable and tel which sw shall i use?

gsmlab4u

http://webuser0.s23.deinprovider.de/Software/z105.rar

gsmlab4u · 02-17-2005, 19:16

if u dont mind pls send me z105 unlocking sw.

gsmlab4u

forhike · 02-17-2005, 19:43

Quote:

Originally Posted by gsmlab4u

if u dont mind pls send me z105 unlocking sw.

gsmlab4u

hello! wats wrong with the link above ? =)

just press the link

iserlohn · 02-18-2005, 09:54

You don't need to special cable, just put a wire to short out pin 2 and 3 on your serial port. Then use your USB cable to flash.

joe2517 · 02-19-2005, 07:36

i have a p107 & x426 samsung cell locked can some help me please

Myco1GSM · 02-22-2005, 02:33

Hi all

ALL UNDERSTOOD WELL & clear

USB Cable made

Fone found

Modem on COM 5

but i dont have serial port

program looks for COM than stops with error

P.S. when modem on COM-5 & run the program i get "cant open COM-1" error.

Any Ideas, please

Thanks 1000 X in advance

joe2517 · 02-22-2005, 18:08

can u unlock a sgh-p107 or sgh-x426 samsung network locked

pyroz · 02-28-2005, 08:27

I need modem driver for Z107v
Z105 drivers dont work

br,
pyroz

CPUKILLER · 04-13-2005, 18:04

[QUOTE=TRIBULUSS]

Quote:

Originally Posted by forhike

If you are locking for samung z107 unlock sollution, why don't you just try with same program that you have when unlocking a z105?

simple use. com connector and short tx and rx pin 2-3 on the (com)
use samsung original usb cable PCB157ULE

I HAVE SAM Z107 AND INSTAL SOVTVER AND DRAIVER IS OK.AI HAVE ORIGINAL CABLE FOR SAM 107.IF I VANT UNLOC PROGRAM WRITE...START UNLOCK,CHECK SERIAL COMUNIKACION WITH THE FONE,SERIAL COM - NG

THIS IS ALL
WHAT MUST AM DO IT::?????

WHAT IS IT Short tx and rx pin 2-3 o ---_??????

USE WIN 98 AND DB9 CONNECTOR 2AND 3 PINS SHORTED

CPUKILLER · 04-13-2005, 18:15

Quote:

Originally Posted by forhike

i don't have any z110 for testing =/
does it exist in europe? or is it asia modell ?

THANKS ALOT ITS A GREAT SOLUTION ATLEAST FOR ME IN MY COUNTRY ILOVE THIS FORUM

byteforce · 04-14-2005, 11:02

I have a Z107 from Orange. And I am right now making the cables, but I don't see anywhere on WINIMEI program the option for Orange operator. What I must select?
thanks in advance

byteforce · 04-14-2005, 14:25

I already made correctly the Z107 cable following the pinout, but Windows is not detecting at all the the phone. Should Windows do it if I have made the cable correctly?
thanks in advance

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
i ned Samsung Z105 UNLOCK SOLLUTION FREE	touta1	QUALCOMM Models (3G)	0	09-18-2008 17:48
Help Samsung Z107 Unlock	blueaurabd	QUALCOMM Models (3G)	5	06-29-2007 12:35
Samsung Z107 Unlocking	afrodizzy	FuriouS II	7	11-18-2005 20:51
Samsung E800 Unlock Code, Free	gaz_0001	SYSOL Platform	10	05-04-2005 21:31
samsung d500 unlocking for free	ronnyj1	SWIFT Platform	4	12-18-2004 10:33

02-14-2005, 19:11	#33 (permalink)
gsmlab4u Freak Poster Join Date: Oct 2004 Age: 50 Posts: 444 Member: 86003 Status: Offline Thanks Meter: 5	thnaks broth, i tried to unlock z105. i made cable and tel which sw shall i use? gsmlab4u

02-17-2005, 19:16	#35 (permalink)
gsmlab4u Freak Poster Join Date: Oct 2004 Age: 50 Posts: 444 Member: 86003 Status: Offline Thanks Meter: 5	if u dont mind pls send me z105 unlocking sw. gsmlab4u

02-18-2005, 09:54	#37 (permalink)
iserlohn Junior Member Join Date: Jan 2005 Age: 44 Posts: 3 Member: 109058 Status: Offline Thanks Meter: 0	You don't need to special cable, just put a wire to short out pin 2 and 3 on your serial port. Then use your USB cable to flash.

02-19-2005, 07:36	#38 (permalink)
joe2517 Junior Member Join Date: Feb 2005 Posts: 4 Member: 118182 Status: Offline Thanks Meter: 0	i have a p107 & x426 samsung cell locked can some help me please

02-22-2005, 02:33	#39 (permalink)
Myco1GSM Junior Member Join Date: Dec 2004 Age: 58 Posts: 5 Member: 95733 Status: Offline Thanks Meter: 0	Hi all ALL UNDERSTOOD WELL & clear USB Cable made Fone found Modem on COM 5 but i dont have serial port program looks for COM than stops with error P.S. when modem on COM-5 & run the program i get "cant open COM-1" error. Any Ideas, please Thanks 1000 X in advance

02-22-2005, 18:08	#40 (permalink)
joe2517 Junior Member Join Date: Feb 2005 Posts: 4 Member: 118182 Status: Offline Thanks Meter: 0	can u unlock a sgh-p107 or sgh-x426 samsung network locked

02-28-2005, 08:27	#41 (permalink)
pyroz No Life Poster Join Date: Dec 2001 Location: at home Age: 45 Posts: 572 Member: 7810 Status: Offline Thanks Meter: 4	I need modem driver for Z107v Z105 drivers dont work br, pyroz

04-14-2005, 11:02	#44 (permalink)
byteforce Cheater -Don't Deal with him- Join Date: Feb 2003 Location: gsmcity Age: 44 Posts: 3,009 Member: 21296 Status: Offline Thanks Meter: 328	I have a Z107 from Orange. And I am right now making the cables, but I don't see anywhere on WINIMEI program the option for Orange operator. What I must select? thanks in advance

04-14-2005, 14:25	#45 (permalink)
byteforce Cheater -Don't Deal with him- Join Date: Feb 2003 Location: gsmcity Age: 44 Posts: 3,009 Member: 21296 Status: Offline Thanks Meter: 328	I already made correctly the Z107 cable following the pinout, but Windows is not detecting at all the the phone. Should Windows do it if I have made the cable correctly? thanks in advance