Post here successfully job with Z3X-BOX Samsung (2018-2022) - Page 50 - GSM-Forum

reyxito · 05-18-2019, 22:41

UNLOCK INSTRUCTIONS:
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock
Selected model: SM-G935P
Software version: 36.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 7.0
PDA version: FA70_G950USQU5ARG4
CSC version:
Phone version: G950USQU5CRF1
Product code: SM-G950UZSASPR
CSC country code:
CSC sales code:
Phone SN: R28J42SRJRL
IMEI: 357721081304446
HW version: REV1.0
RF cal date: 2017.04.21
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-02-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.36.2

Samisamiyes · 05-19-2019, 10:01

plz Help

Operation: Write CERT
Selected model: SM-G570F
Software version: 36.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G570F
Android version: 8.0.0
PDA version: G570FXXU1CRH9
CSC version: G570FOJV1CRH9
Phone version: G570FXXU1CRH8
Product code: SM-G570FZKDKSA
CSC country code: KSA
CSC sales code: KSA
Phone SN: R58J44QYSDP
IMEI: 357762084501935
HW version: MP 0.500
RF cal date: 20170421
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2018-09-01
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... error
Security damaged (4 13)
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... error (0)
Try downgrade modem if possible

Done with Samsung Tool PRO v.36.1

butux2020 · 05-19-2019, 11:52

it shows
imei certi: pass
mipi device fail

mostafa1000 · 05-19-2019, 17:19

Mode: Normal
Model: LMX212MA
Build version: Oct 3 201822:07:01Jun 20 201806:00:00LMX212MA
SW Version: MPSS.JO.3.0.c12-00013-8937_GENNS_PACK-1
IMEI: 356351---------4
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 2 secs. --> (v9.61)

Mode: Normal
Model: LMX212MA
Build version: Oct 3 201822:07:01Jun 20 201806:00:00LMX212MA
SW Version: MPSS.JO.3.0.c12-00013-8937_GENNS_PACK-1
IMEI: 35635---------1-4
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Checking Login and Password... OK
Ballance: 10 crd.
You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes
Searching modem interface... found COM9
Reading data from phone... OK
IMEI: 35635-------14
Checking root rights... OK
Writing zTool... OK
SW Version: X212MA
Initialization zTool... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Initialization zTool... OK
Reading data from phone... OK
Unlocking done
Elapsed: 215 secs. --> (v9.61)

souma_k · 05-19-2019, 23:17

Quote:

Originally Posted by butux2020

it shows
imei certi: pass
mipi device fail

Phone has hardware problem try to repair device mipi

Sent from my Le X829 using Tapatalk

sergiosierra · 05-21-2019, 08:13

Operation: Unlock
Selected model: SM-G955U
Selected port: COM148 SAMSUNG Mobile USB Serial Port
Software version: 36.2

Checking Login and Password... OK
Ballance: 32 crd.
You have 32 credit(s) left. This operation takes 8 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G955U
Android version: 7.0
PDA version: G955USQU1AQJ8
CSC version: G955UOYN1AQJ8
Phone version: G955USQU1AQJ8
Product code: SM-G955UZVATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28J*******
IMEI: 35775**********
HW version: REV1.0
RF cal date: 2017.07.03
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... detected COM148
Reading phone info... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.36.2

sergiosierra · 05-21-2019, 09:50

Works fine in Bit 3, install first COMBINATION_FA70_G892USQU3ARG1, Unlock with Z3x select Model SM-G935P and after install Rom Stock, my case G892USQS3BSA1..... if stock in logo, just do it wipe´s from Recovery.

Operation: Unlock
Selected model: SM-G935P
Software version: 36.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G892U
Android version: 7.0
PDA version: FA70_G892USQU3ARG1
CSC version:
Phone version: G892USQU3ARG1
Product code: SM-G892UZAASPR
CSC country code:
CSC sales code:
Phone SN: R38K*******
IMEI: 35261**********
HW version: REV0.4
RF cal date: 2018.01.31
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-02-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

saludos!!!

sergiosierra · 05-21-2019, 10:43

Quote:

Originally Posted by sergiosierra

Works fine in Bit 3, install first COMBINATION_FA70_G892USQU3ARG1, Unlock with Z3x select Model SM-G935P and after install Rom Stock, my case G892USQS3BSA1..... if stock in logo, just do it wipe´s from Recovery.

Operation: Unlock
Selected model: SM-G935P
Software version: 36.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G892U
Android version: 7.0
PDA version: FA70_G892USQU3ARG1
CSC version:
Phone version: G892USQU3ARG1
Product code: SM-G892UZAASPR
CSC country code:
CSC sales code:
Phone SN: R38K*******
IMEI: 35261**********
HW version: REV0.4
RF cal date: 2018.01.31
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-02-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

saludos!!!

Same metod for Galaxy S8 SM-G950U1 Bit 5, only change the files to use: COMBINATION_FA70_G950U1SQU5ARG4_CL13344735_QB18805 722_REV00_user_mid_noship_MULT_CERT.tar, Unlock select Model SM-G935P and for last, install Rom Stock SPR-G950U1UES5CRL2_G950U1OYM5CRL2-20181205

https://ibb.co/ZLwjRFC
https://ibb.co/VTDwhsY
https://ibb.co/GpgL0gm
https://ibb.co/6rg9jdd

Operation: Unlock
Selected model: SM-G935P
Software version: 36.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 7.0
PDA version: FA70_G950USQU5ARG4
CSC version:
Phone version: G950USQU5CRF1
Product code: SM-G950UZKASPR
CSC country code:
CSC sales code:
Phone SN: R28J6******
IMEI: 35598**********
HW version: REV1.0
RF cal date: 2017.06.08
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-02-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

NOTE: This two unlocks is for Sprint models.

Regards!!!

SalemDebug · 05-21-2019, 11:47

Bro Where is the Model Number

sergiosierra · 05-21-2019, 11:53

Quote:

Originally Posted by SalemDebug

Bro Where is the Model Number

who are you asking for?

kondeci91 · 05-22-2019, 08:41

Operation: Unlock
Selected model: SM-G900P
Selected port: COM3 Z3X BOX Serial Port
Software version: 36.2

Waiting ADB device... OK
Reading phone info...
Model: SM-G900P
Android version: 6.0.1
PDA version: G900PVPS3CQD1
CSC version: G900PSPT3CQD1
Phone version: G900PVPS3CQD1
Product code: Not Active
CSC country code: USA
CSC sales code: SPR
Phone SN: 00000000000
IMEI: 990004734263142
HW version: G900P.04
RF cal date: 2014.11.12
Chip name: MSM8974PRO
Modem board: MSM8974PRO
Security patch: 2017-04-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... root required
Checking Super user right... true
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.36.2

ghacks · 05-22-2019, 19:14

UNLOCK INSTRUCTIONS:
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.

Operation: Unlock
Selected model: SM-J327P
Software version: 36.2

Waiting ADB device... OK
Reading phone info...
Model: SM-J327P
Android version: 6.0.1
PDA version: J327PVPU4ARG2
CSC version: J327PSPT4ARG2
Phone version: J327PVPU4ARF2
Product code: Not Active
CSC country code: USA
CSC sales code: BST
Phone SN: 00000000000
IMEI: 359102081577075
HW version: J327P.03
RF cal date: 2017.07.01
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2018-07-01
Boot Warranty bit: 0
SIM State: CARD_IO_ERROR
Searching Samsung diag port... detected COM433
Writing data to phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.36.2

mathew_di · 05-22-2019, 20:31

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in
'Settings'-'Applications'-'Development' for Android 2.x or
'Settings'-'Developer options' for Android 4.x.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.

Operation: Repair
Selected model: GT-S5839I
Software version: 35.3

Waiting ADB device... OK
Reading phone info...
Model: GT-S5839i
Android version: 2.3.6
PDA version: S5839iBVLD3
CSC version: S5839iIDELD1
Phone version: S5839iBVLD3
Product code:
CSC country code: POLAND
CSC sales code: IDE
Phone SN: RF1D5217KYP
IMEI:
HW version: MP 0.000
RF cal date: 20130507
Chip name:
Modem board:
Checking Super user right... false
Rooting phone, please wait... OK
Checking Super user right... true
Reading data from phone... OK
Writing data to phone... OK
Rebooting phone... OK
Repair done
Done with Samsung Tool PRO v.35.3

umarnlw · 05-23-2019, 10:24

Samsung J6+ J610F FRP Reset Done Via Combination Method With Z3x

here are Logs

Youtube Link

https://www.youtube.com/watch?v=cd59...ture=*********

suh junior · 05-23-2019, 11:22

Operation: Read Codes
Selected model: GT-S5830D
Selected port: COM11 SAMSUNG Android USB Diagnostic Serial Port (WDM)
Software version: 35.3

Checking phone at COM11
Reading phone info... OK
Model:
Country code:
Cal date:
Factory SW:
Unique number:
Memory phone:
Phone SN: R21C960MSL
PDA/CSC version: S5830DTLKI4/S5830TLSLKI4
Phone version: S5830DTLKI4
Phone HW: REV1.0
Cal date: 2012.09.24
Reading IMEI... OK
IMEI: 35907904435xxxx
Reseting MSL... OK
Bypass MSL... OK
Reading codes... OK
Freeze code: 68195209
NET lock: 40283849
SUB lock: 00000000
SP lock: 40283849
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.35.3

05-18-2019, 22:41	#736 (permalink)
reyxito No Life Poster Join Date: Mar 2016 Location: Puerto Rico Posts: 608 Member: 2549748 Status: Offline Thanks Meter: 212	Sm-g950u spr unlock bit 5 UNLOCK INSTRUCTIONS: Domestic Unlock: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock Domestic' button. To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' to deactivate Google account activation lock. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.) Operation: Unlock Selected model: SM-G935P Software version: 36.2 Waiting ADB device... OK Reading phone info... Model: SM-G950U Android version: 7.0 PDA version: FA70_G950USQU5ARG4 CSC version: Phone version: G950USQU5CRF1 Product code: SM-G950UZSASPR CSC country code: CSC sales code: Phone SN: R28J42SRJRL IMEI: 357721081304446 HW version: REV1.0 RF cal date: 2017.04.21 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-02-01 Boot Warranty bit: 0 Incorrect model selected. This may damage your phone. Continue? Yes Writing AT RIL... OK Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.36.2

05-19-2019, 17:19	#739 (permalink)
mostafa1000 Freak Poster Join Date: Apr 2007 Location: egypet Posts: 122 Member: 483811 Status: Offline Thanks Meter: 23	lg LMX212ta network unlock done Mode: Normal Model: LMX212MA Build version: Oct 3 201822:07:01Jun 20 201806:00:00LMX212MA SW Version: MPSS.JO.3.0.c12-00013-8937_GENNS_PACK-1 IMEI: 356351---------4 BlueTooth Address: 00:00:00:00:00:00 Phone Code: Elapsed: 2 secs. --> (v9.61) Mode: Normal Model: LMX212MA Build version: Oct 3 201822:07:01Jun 20 201806:00:00LMX212MA SW Version: MPSS.JO.3.0.c12-00013-8937_GENNS_PACK-1 IMEI: 35635---------1-4 BlueTooth Address: 00:00:00:00:00:00 Phone Code: Elapsed: 1 secs. --> (v9.61) Checking Login and Password... OK Ballance: 10 crd. You have 10 credit(s) left. This operation takes 10 credits.Continue? Yes Searching modem interface... found COM9 Reading data from phone... OK IMEI: 35635-------14 Checking root rights... OK Writing zTool... OK SW Version: X212MA Initialization zTool... OK Reading data from phone... OK Calculating... OK Searching server... OK Waiting for server answer... OK Initialization zTool... OK Reading data from phone... OK Unlocking done Elapsed: 215 secs. --> (v9.61)

05-21-2019, 08:13	#741 (permalink)
sergiosierra Freak Poster Join Date: Feb 2014 Posts: 176 Member: 2122242 Status: Offline Thanks Meter: 63	G955U T-Mobile Unlock Done!!! Operation: Unlock Selected model: SM-G955U Selected port: COM148 SAMSUNG Mobile USB Serial Port Software version: 36.2 Checking Login and Password... OK Ballance: 32 crd. You have 32 credit(s) left. This operation takes 8 credits.Continue? Yes Waiting ADB device... OK Reading phone info... Model: SM-G955U Android version: 7.0 PDA version: G955USQU1AQJ8 CSC version: G955UOYN1AQJ8 Phone version: G955USQU1AQJ8 Product code: SM-G955UZVATMB CSC country code: USA CSC sales code: TMB Phone SN: R28J***** IMEI: 35775******** HW version: REV1.0 RF cal date: 2017.07.03 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-10-01 Boot Warranty bit: 0 SIM State: ABSENT Searching Samsung diag port... detected COM148 Reading phone info... OK Reading data from phone... OK Searching server... OK Waiting for server answer... OK Waiting ADB device... OK Waiting for device to become ready... OK Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.36.2

05-21-2019, 09:50	#742 (permalink)
sergiosierra Freak Poster Join Date: Feb 2014 Posts: 176 Member: 2122242 Status: Offline Thanks Meter: 63	G892U Unlock Done without Server!!! Works fine in Bit 3, install first COMBINATION_FA70_G892USQU3ARG1, Unlock with Z3x select Model SM-G935P and after install Rom Stock, my case G892USQS3BSA1..... if stock in logo, just do it wipe´s from Recovery. Operation: Unlock Selected model: SM-G935P Software version: 36.2 Waiting ADB device... OK Reading phone info... Model: SM-G892U Android version: 7.0 PDA version: FA70_G892USQU3ARG1 CSC version: Phone version: G892USQU3ARG1 Product code: SM-G892UZAASPR CSC country code: CSC sales code: Phone SN: R38K***** IMEI: 35261******** HW version: REV0.4 RF cal date: 2018.01.31 Chip name: MSM8998 Modem board: MSM8998 Security patch: 2017-02-01 Boot Warranty bit: 0 Incorrect model selected. This may damage your phone. Continue? Yes Writing AT RIL... OK Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done saludos!!!

05-22-2019, 19:14	#747 (permalink)
ghacks No Life Poster Join Date: Dec 2009 Location: *** Taste Good Age: 39 Posts: 4,066 Member: 1196914 Status: Offline** Sonork: 100.1667938 Thanks Meter: 1,645	Sm-j327p unlock done rg2 build UNLOCK INSTRUCTIONS: Domestic Unlock: 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Developer options', tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Unlock Domestic' button. Operation: Unlock Selected model: SM-J327P Software version: 36.2 Waiting ADB device... OK Reading phone info... Model: SM-J327P Android version: 6.0.1 PDA version: J327PVPU4ARG2 CSC version: J327PSPT4ARG2 Phone version: J327PVPU4ARF2 Product code: Not Active CSC country code: USA CSC sales code: BST Phone SN: 00000000000 IMEI: 359102081577075 HW version: J327P.03 RF cal date: 2017.07.01 Chip name: MSM8937 Modem board: MSM8917 Security patch: 2018-07-01 Boot Warranty bit: 0 SIM State: CARD_IO_ERROR Searching Samsung diag port... detected COM433 Writing data to phone... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.36.2

05-19-2019, 10:01	#737 (permalink)
Samisamiyes Junior Member Join Date: Dec 2017 Posts: 8 Member: 2794271 Status: Offline Thanks Meter: 1	plz Help Operation: Write CERT Selected model: SM-G570F Software version: 36.1 Waiting ADB device... OK Reading phone info... Model: SM-G570F Android version: 8.0.0 PDA version: G570FXXU1CRH9 CSC version: G570FOJV1CRH9 Phone version: G570FXXU1CRH8 Product code: SM-G570FZKDKSA CSC country code: KSA CSC sales code: KSA Phone SN: R58J44QYSDP IMEI: 357762084501935 HW version: MP 0.500 RF cal date: 20170421 Chip name: EXYNOS7570 Modem board: SHANNON305 Security patch: 2018-09-01 Boot Warranty bit: 0 SIM State: ABSENT,ABSENT Checking Super user right... true Reading NV data... OK Checking NV data... OK Reading data... error Security damaged (4 13) Initialization zTool... OK Running zTool, please wait... OK Reading data from phone... error (0) Try downgrade modem if possible Done with Samsung Tool PRO v.36.1

05-19-2019, 11:52	#738 (permalink)
butux2020 Junior Member Join Date: Jun 2012 Location: nigeria Posts: 19 Member: 1772864 Status: Offline Thanks Meter: 0	it shows imei certi: pass mipi device fail

05-21-2019, 11:47	#744 (permalink)
SalemDebug Junior Member Join Date: May 2019 Location: Salem Posts: 3 Member: 2907927 Status: Offline Thanks Meter: 0	Bro Where is the Model Number

05-22-2019, 08:41	#746 (permalink)
kondeci91 Crazy Poster Join Date: Apr 2015 Location: Armenia Posts: 59 Member: 2377346 Status: Offline Thanks Meter: 1	Operation: Unlock Selected model: SM-G900P Selected port: COM3 Z3X BOX Serial Port Software version: 36.2 Waiting ADB device... OK Reading phone info... Model: SM-G900P Android version: 6.0.1 PDA version: G900PVPS3CQD1 CSC version: G900PSPT3CQD1 Phone version: G900PVPS3CQD1 Product code: Not Active CSC country code: USA CSC sales code: SPR Phone SN: 00000000000 IMEI: 990004734263142 HW version: G900P.04 RF cal date: 2014.11.12 Chip name: MSM8974PRO Modem board: MSM8974PRO Security patch: 2017-04-01 Boot Warranty bit: 1 Writing AT RIL... OK Initialization AT RIL... root required Checking Super user right... true Initialization AT RIL... OK Unlocking... OK Rebooting phone... OK Unlock done Done with Samsung Tool PRO v.36.2

05-22-2019, 20:31	#748 (permalink)
mathew_di No Life Poster Join Date: Feb 2008 Location: turkey Posts: 1,746 Member: 706822 Status: Offline Thanks Meter: 647	S5839İ İmeİ repaİr dİrect wow :) REPAIR INSTRUCTIONS: Phone must be rooted! If the software can't root the phone automatically, then you must root your device manually. 1. Power on the phone. 2. Enable 'USB debugging' in 'Settings'-'Applications'-'Development' for Android 2.x or 'Settings'-'Developer options' for Android 4.x. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Fill values what you need to repair. 6. Press 'Repair' button. Operation: Repair Selected model: GT-S5839I Software version: 35.3 Waiting ADB device... OK Reading phone info... Model: GT-S5839i Android version: 2.3.6 PDA version: S5839iBVLD3 CSC version: S5839iIDELD1 Phone version: S5839iBVLD3 Product code: CSC country code: POLAND CSC sales code: IDE Phone SN: RF1D5217KYP IMEI: HW version: MP 0.000 RF cal date: 20130507 Chip name: Modem board: Checking Super user right... false Rooting phone, please wait... OK Checking Super user right... true Reading data from phone... OK Writing data to phone... OK Rebooting phone... OK Repair done Done with Samsung Tool PRO v.35.3

05-23-2019, 10:24	#749 (permalink)
umarnlw No Life Poster Join Date: Dec 2005 Location: Narowal Posts: 3,317 Member: 207708 Status: Offline Sonork: 100.1602241 Thanks Meter: 1,005	Samsung J6+ J610F FRP Reset Done Via Combination Method With Z3x Samsung J6+ J610F FRP Reset Done Via Combination Method With Z3x here are Logs Youtube Link https://www.youtube.com/watch?v=cd59...ture=*********

05-23-2019, 11:22	#750 (permalink)
suh junior Junior Member Join Date: Jan 2019 Posts: 2 Member: 2890296 Status: Offline Thanks Meter: 0	samsung gt-b5830d unlock done! Operation: Read Codes Selected model: GT-S5830D Selected port: COM11 SAMSUNG Android USB Diagnostic Serial Port (WDM) Software version: 35.3 Checking phone at COM11 Reading phone info... OK Model: Country code: Cal date: Factory SW: Unique number: Memory phone: Phone SN: R21C960MSL PDA/CSC version: S5830DTLKI4/S5830TLSLKI4 Phone version: S5830DTLKI4 Phone HW: REV1.0 Cal date: 2012.09.24 Reading IMEI... OK IMEI: 35907904435xxxx Reseting MSL... OK Bypass MSL... OK Reading codes... OK Freeze code: 68195209 NET lock: 40283849 SUB lock: 00000000 SP lock: 40283849 CP lock: 00000000 For check lock status: *#7465625# Done with Samsung Tool PRO v.35.3