Post here successfully job with Z3X-BOX Samsung (2018-2022)

[chipscell25]

Operation: Reset FRP
Selected model: SM-G532M
Software version: 40.7

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G532M
Android version: 6.0.1
PDA version: G532MUMU1AQG5
CSC version: G532MUWE1AQG5
Phone version: G532MUBU1AQF1
Product code: SM-G532MZDADOR
CSC country code: DOMINICAN REPUBLIC
CSC sales code: DOR
Phone SN: RV8J51NR6NE
IMEI: 3582150xxxxxxxx
HW version: MP 0.300
RF cal date: 20170523
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-07-01
Boot Warranty bit: 0
SIM State: ABSENT
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.40.7

[chipscell25]

Operation: Flash
Selected model: SM-J327A
Software version: 40.7

File analysis... OK
Total file size: 0xC066B249 (3078 Mb)
Searching USB Flash interface... COM34 detected
Setup connection... OK
Getting device info... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending userdata.img... OK
Sending sboot.bin... OK
Sending param.bin... OK
Sending cm.bin... OK
Sending modem.bin... OK
Sending cache.img... OK
Flashing done (time - 00:01:32)
Done with Samsung Tool PRO v.40.7

[chipscell25]

Operation: Unlock
Selected model: SM-J700T
Software version: 40.7

Waiting ADB device... OK
Reading phone info...
Model: SM-J700T
Android version: 6.0.1
PDA version: J700TUVS3AQF1
CSC version: J700TTMB3AQF1
Phone version: J700TUVS3AQF1
Product code: SM2J700TZWATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R58H922QTZV
IMEI: 3572180xxxxxxxx
HW version: REV0.5
RF cal date: 20160911
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-06-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Initialization data... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: 60 69 F8 50 44 BC 05 9E D0 30 4E 37 1E F0 75 24
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.40.7

[chipscell25]

Operation: Unlock
Selected model: SM-J700P
Software version: 40.7

Waiting ADB device... OK
Reading phone info...
Model: SM-J700P
Android version: 6.0.1
PDA version: FA60_J700PVPU2BQI2
CSC version:
Phone version: J700PVPU1APH4
Product code: Not Active
CSC country code:
CSC sales code:
Phone SN: 00000000000
IMEI: 3556280xxxxxxxx
HW version: J700P.03
RF cal date: 2016.09.12
Chip name: MSM8929
Modem board: MSM8929
Security patch: 2016-01-01
Boot Warranty bit: 1
Writing AT RIL... OK
Initialization AT RIL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.40.7

[chipscell25]

Operation: Unlock
Selected model: SGH-T989
Selected port: COM10 Z3X BOX Serial Port
Software version: 40.8

Reading phone info...
Model: SGH-T989
Country code: ªU
Cal date: ªU
Factory SW: T989UVMC6
Unique number: CKY2521C44099BF
Memory phone: ªU
Phone SN: R31CB1PR50
PDA/CSC version: T989UVMC6/T989TMBMC6
Phone version: SW VERSION :None
Phone HW: REV0.1
Cal date: 2012.11.24
Reading IMEI... OK
IMEI: 359858044335816
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.40.8

[profkefah]

Operation: Info
Selected model: SM-G925I
Software version: 40.4

Searching Samsung modem... detected COM244
Reading phone info...
Model: SM-G925I
AP version: G925IDVU3EPL6
CSC version: G925ITFG3EPL1
CP version: G925IDVU3EPL1
Product code: XXXXXXXXXXXXXX
Phone SN: 00000000000
IMEI:
Unique number: 1015FA1394A92505
Reading IMEI... OK
IMEI: 359030061902742 (SIGN: OK)

Done with Samsung Tool PRO v.40.4





Operation: Read EFS
Selected model: SM-G925I
Software version: 40.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G925I
Android version: 6.0.1
PDA version: G925IDVU3EPL6
CSC version: G925ITFG3EPL1
Phone version: G925IDVU3EPL1
Product code:
CSC country code: OPEN
CSC sales code: TFG
Phone SN: 00000000000
IMEI:
HW version:
RF cal date:
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-12-01
Boot Warranty bit: 1
Checking Super user right... true
Reading EFS from phone... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungToolPRO\backup\EFS\EFS_SM-G925I_G925IDVU3EPL6__00000000000_20-7-2020_11-13-30.tar

Done with Samsung Tool PRO v.40.4


Operation: Read CERT
Selected model: SM-G925I
Software version: 40.4

Waiting ADB device... OK
Reading phone info...
Model: SM-G925I
Android version: 6.0.1
PDA version: G925IDVU3EPL6
CSC version: G925ITFG3EPL1
Phone version: G925IDVU3EPL1
Product code:
CSC country code: OPEN
CSC sales code: TFG
Phone SN: 00000000000
IMEI:
HW version:
RF cal date:
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-12-01
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait... OK
HWID: C8 11 99 AE 57 04 00 00 00 00 00 00 00 00 00 00
Calculating... OK
Certificate file saved to C:\Program Files\Z3X\Samsung\SamsungToolPRO\backup\Cert\SM-G925I__20-7-2020_11-14-39.cert

Done with Samsung Tool PRO v.40.4

[profkefah]

Operation: Repair DRK
Selected model: SM-G925I
Software version: 40.4


Checking local file... OK
Searching server... OK
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM75 detected
Setup connection... OK
Reading data from phone... OK
Sending data to phone... OK
Sending data to phone... OK
Waiting ADB device... OK
Reading phone info...
Recovery build version: 6.0.1
Boot version: G925IDVS3EPH3
Platform: exynos7420
Boot serial: 1015fa1394a92505
Product board: zerolte
Initialization zTool... OK
Running zTool, please wait... OK
Checking DRK status... NG!
Writing DRK... OK
Checking DRK status...
Repairing DMVT key... OK
Rebooting phone... OK
Repair DRK done


Done with Samsung Tool PRO v.40.4

[umarnlw]

Samsung Galaxy J7 2017 J730F U3 FRP Reset Done via Combination by Z3X

Here are logs



Youtube Link

https://www.youtube.com/watch?v=q-rXghtCfbA

[onyonsilk]

A105FN U3 Android 10

]Hello, the problem of that error of the z3x log is caused by the firmware that you have installed in the phone A105FNXXU3BTD4 with security patch of May 2020 with android 10, it is not supported by z3x for unlocking the network, downgrade to android 9 with binary 3 firmware for a105fn with older security patches and repeat the unlocking of the network with z3x.

Try to install this firmware and repeat unlock phone with z3x

Android 9
PDA: A105FNXXU3ATA1
CSC: A105FNOXM3ASL4
Phone Version (Modem): A105FNXXU3ASL3
Security patch level January 2020


A105FNXXU3ATA1_A105FNOXM3ASL4_DBT_9.0_Full.rar
Download:

https://androidfilehost.com/?fid=4349826312261724688


If even with this firmware you cannot unlock the network, unfortunately there is currently no solution at the moment[/Q
Thanks it worked

Operation: Read Codes via Server
Selected model: SM-A105FN
Software version: 40.8

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A105FN
Android version: 9
PDA version: A105FNXXU3ATA1
CSC version: A105FNOXM3ASL4
Phone version: A105FNXXU3ASL3
Product code: SM-A105FZBYXEF
CSC country code: France
CSC sales code: XEF
Phone SN: RZ8N124DMKR
IMEI: 353338113160136
HW version: REV0.1
RF cal date: 20200124
Chip name: EXYNOS7884B
Modem board: SHANNON327
Security patch: 2020-01-01
Boot Warranty bit: 0
SIM State: ABSENT,REGIONAL_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Waiting ADB device... OK
Searching Samsung diag port... detected COM37
Searching server... OK
Checking server answer... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 03507926
NET lock: 29268373
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.40.8

[umarnlw]

Samsung Galaxy J7 J710F U6 FRP Reset Done via Combination by Z3X

Here are Logs



Youtube Link

https://www.youtube.com/watch?v=-TnAq3FnxnQ

[chipscell25]

Operation: Unlock
Selected model: SM-J700M
Software version: 40.9

Waiting ADB device... OK
Reading phone info...
Model: SM-J700M
Android version: 6.0.1
PDA version: J700MUBS2BQEC
CSC version: J700MUWA2BPL2
Phone version: J700MUBS2BQB2
Product code: SM-J700MZDACDR
CSC country code: Dominican Republic
CSC sales code: CDR
Phone SN: R28H32ZFEKN
IMEI: 3583160xxxxxxxx
HW version: MP 0.700
RF cal date: 20160323
Chip name: EXYNOS7580
Modem board: SHANNON310
Security patch: 2017-05-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.40.9

[chipscell25]

Operation: Reset FRP
Selected model: SM-G530T1
Software version: 40.9

You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G530T1
Android version: 5.1.1
PDA version: G530T1UVS2AQE3
CSC version: G530T1TMB2AQE3
Phone version: G530T1UVS2AQE3
Product code: SM2G530TRAATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R58H33551EF
IMEI:
HW version: REV0.1
RF cal date: 2016.03.22
Chip name: MSM8916
Modem board: MSM8916
Security patch: 2017-05-01
Boot Warranty bit: 0
SIM State: READY
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.40.9

[anrmobile]

Operation: Unlock
Selected model: SM-G930T
Selected port: COM1 Communications Port
Software version: 40.9

Checking Login and Password... OK
Ballance: 9 crd.
You have 9 credit(s) left. This operation takes 6 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G930T
Android version: 8.0.0
PDA version: G930TUVU4CRF1
CSC version: G930TTMB4CRF1
Phone version: G930TUVU4CRF1
Product code: SM-G930TZDATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28HB2WN07X
IMEI: 359754073328154
HW version: REV0.6
RF cal date: 2016.11.21
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-04-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.40.9

[..::GMSR::..]

UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock.
If phone ask codes after unlocking, use:
PUK - 12345678
PIN - 00000000

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Unlock
Selected model: SM-G361F
Software version: 40.9

Waiting ADB device... OK
Reading phone info...
Model: SM-G361F
Android version: 5.1.1
PDA version: G361FXXU1AOG3
CSC version: G361FOXX1AOG2
Phone version: G361FXXU1AOG2
Product code: SM-G361FHAAMET
CSC country code: Ireland
CSC sales code: MET
Phone SN: RV8G9218EMT
IMEI: 35XXXXXXXXXXXXX
HW version: MP 0.100
RF cal date: 20150928
Chip name: PXA19XX
Modem board:
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Analyzing SEC file... OK
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL... OK
Unlocking... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.40.9

[dr_moosavi]

J700F/DS NETWORK Unlock done

Operation: Unlock
Selected model: SM-J700F/DS
Software version: 40.8

Waiting ADB device... OK
Reading phone info...
Model: SM-J700F
Android version: 5.1.1
PDA version: J700FXXU1AOG9
CSC version: J700FOJV1AOG9
Phone version: J700FXXU1AOFJ
Product code: SM-J700FZWDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: R28GC2G8GBP
IMEI: 3561XXXXX052786
HW version: MP 0.701
RF cal date: 20151217
Chip name: EXYNOS7580
Modem board: SHANNON310
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED,NETWORK_LOCKED
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.40.8