Samsung N7100 - NO PRODUCT NAME REPAIR

[allumts]

Originally Posted by shoaibrao

Sir Can You Share Here Clean EFS?
My HandSet Has Android 4.3 With New Bootloader(Knox Bootloader)..........

Here:
N7100_EFS.tar - Download - 4shared

if have problem rename .TAR only
br
allumts

[shoaibrao]

Originally Posted by allumts

Here:
N7100_EFS.tar - Download - 4shared

if have problem rename .TAR only
br
allumts

I Tried This EFS But Same
Also Flashed With PIT+PDA After EFS Write But Same
Need More Help Plz.........

[rasheedc007]

atf network activation need for this operation???

[allumts]

Originally Posted by rasheedc007

atf network activation need for this operation???

strange you not have Atf net active.... for this operation i not think you have need Atf Net

[sync005]

great news atf team.


keep it up.

[bharatsubedi]

sir i not have atf emmc ripair jig adepter rj 45 cable worked..? please example limua 900 tespoint unlock rj 45 cable.. that cable worked..? please sir urjent

[allumts]

Originally Posted by bharatsubedi

sir i not have atf emmc ripair jig adepter rj 45 cable worked..? please example limua 900 tespoint unlock rj 45 cable.. that cable worked..? please sir urjent

Jig Unbrick is one thingh.... 4 in 1 emmc Jtag Adapter is other thingh and Lumia 900 testpoint unlock RJ45 cable is another one...please explain CLEAR what do u want do

[jakoy]

need N7105 eMMC REPAIR FILES...

[rico_deep]

how to do this :
Step 8: Final Checks
Click "Scan eMMC" and make sure eMMC is set to BOOT PARTITION : BOOT PARTITION 1

successfully WRITE user data and BOOT1 but after i scan eMMC

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 15010056545530304DF139FF24E0
CSD : D02701320F5903FFF6DBFFFF8E40406D

eMMC Boot Information
Revision 1.6 (for MMC v4.5)
BOOT PARTITION : USER AREA
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 2048 KB
RPMB PARTITION SIZE: 128 KB


eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : VTU00M
Product Rev : 15.1
Product SN : 39FF24E0
Manufactured : January 2012

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRANS_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
15010056545530304DF139FF24E0_F4B78A9E.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

br.
FFC

[rico_deep]

sorry mine mistake....DONE



thanks ATF

br.
FFC

[mctsofpr]

Originally Posted by Advance-Box

Here is ONE of the phones I was able to repair... (We also have a lot of phones which required eMMC Chip replacement. After lemor changed the eMMC, the phone was fixed).


Right After eMMC Repair Tasks were done...




Phone Info showing 4.1.1...




Download Mode showing Fixed "Product Name"




I flashed phone to 4.3 just to check if flashing is OK




B.R.

After the mod with the 2 Resistors on the ATF 4 in 1 can we leave there forever for any model or its better to have 2 ATF 4 in 1 wich one can be modded with the two resistors and the other without the 2 resistors?

[FON-TECNO]

Originally Posted by swechacnu

Here is the i9300 emmc pinout with color code...and also direct rj45 atf big box connection...


BR,
Srinivas Reddy.

pls i will like to kn which color of wire gos to the VCC (2.8) and VCCQ (1.8), am useing the ATF 4 IN 1 Ultimate JTAG/EMMC/ISP/MMC Adaptor, an am some how loss there thanks

[allumts]

@FON-TECNO,
loock good pictures of this post and undestand where are the VCC and VCCQ, if have BIG ATF can use Pin 2 for to have VCC 3,3V,

http://forum.gsmhosting.com/vbb/10135977-post1.html

[rico_deep]

After the mod with the 2 Resistors on the ATF 4 in 1 can we leave there forever for any model or its better to have 2 ATF 4 in 1 wich one can be modded with the two resistors and the other without the 2 resistors?

same here ...................................


br.
FFC

[allumts]

@rico_deep @FON-TECNO,

Your answere is here:
So here you will see that I added 2 resistors (100 ohms) to the CMD and the DATA0 of the eMMC Adapter. Both of the resistors act as a Strong PULL-UP to 3.3v.

SO, you can leave for Samsung eMMc unbrick, but when you wont work whith wires for Test Point or Jtag in Nokia phone i think this value are falsed... Atf Team Correct me if I'm wrong
BR
allumts