|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Today's Posts | Search |
Easy-Jtag / Easy-Jtag Plus The official support section. You can ask here your question and get answer regarding using Easy-Jtag / Easy-Jtag Plus. |
| LinkBack | Thread Tools | Display Modes |
03-21-2018, 06:02 | #616 (permalink) |
No Life Poster Join Date: May 2010 Location: Incredible-India
Posts: 6,018
Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297 | Htc D616 Dead Recover Change emmc Done Change Emmc Skhynix-xxx To Skhynix-xxxxx All Job Done SucessFully Thanks To Easy Jtag Image-1 Log Image Recover Sucessfully |
The Following 7 Users Say Thank You to Deepesh Sharma For This Useful Post: |
03-21-2018, 06:58 | #617 (permalink) |
No Life Poster Join Date: May 2010 Location: Incredible-India
Posts: 6,018
Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297 | Intex Aqua star 5.0 dead recover repair emmc Intex Aqua Star 5.0 Dead Recover Reapir Emmc Log Code: 20-Mar-18 12:07:11 PM> Looking for EasyJTAG box... 20-Mar-18 12:07:11 PM> EasyJTAG API ver. 2022 20-Mar-18 12:07:11 PM> Setting IO Levels to 2.8V 20-Mar-18 12:07:11 PM> Setting frequence to 42 Mhz 20-Mar-18 12:07:11 PM> EasyJTAG Box Serial = 5B99395BEB0C6184 20-Mar-18 12:07:11 PM> EasyJTAG Box Firmware = 2.21 20-Mar-18 12:07:12 PM> Setting interface to EasyJtag2/E-Socket 20-Mar-18 12:07:12 PM> Setting bus width to 8 Bit 20-Mar-18 12:07:12 PM> Setting frequence to 42 Mhz 20-Mar-18 12:07:12 PM> eMMC Init returned = 0 20-Mar-18 12:07:12 PM> EMMC Device Information : 20-Mar-18 12:07:12 PM> EMMC CID: 1501004B3758564D42016DF4EAA8818B 20-Mar-18 12:07:12 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D 20-Mar-18 12:07:12 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: K7XVMB , EMMC NAME (HEX): 4B3758564D42 , S/N: 6DF4EAA8 , rev. 0x01 20-Mar-18 12:07:12 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 8/2014 20-Mar-18 12:07:12 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) 20-Mar-18 12:07:12 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 20-Mar-18 12:07:12 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000) 20-Mar-18 12:07:12 PM> EMMC Permanent Write Protection: No 20-Mar-18 12:07:12 PM> EMMC Temporary Write Protection: No 20-Mar-18 12:07:12 PM> Extended CSD Information : 20-Mar-18 12:07:12 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 20-Mar-18 12:07:12 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 20-Mar-18 12:07:12 PM> Boot Bus Config: 0x00 , width 1bit 20-Mar-18 12:07:12 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 20-Mar-18 12:07:12 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 20-Mar-18 12:07:12 PM> Device supports partitioning features 20-Mar-18 12:07:12 PM> Device can have enhanced technological features in partitions and user data area 20-Mar-18 12:07:12 PM> Device can have extended partitions attribute 20-Mar-18 12:07:12 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 20-Mar-18 12:07:12 PM> Backup saved: K7XVMB_6DF4EAA8_20180320_120712.extcsd 20-Mar-18 12:07:12 PM> EMMC Init completed. 20-Mar-18 12:07:12 PM> 20-Mar-18 12:07:12 PM> Scanning soft partitions 20-Mar-18 12:07:13 PM> Partition table not found 20-Mar-18 12:07:13 PM> 20-Mar-18 12:07:13 PM> Get firmware version 20-Mar-18 12:07:15 PM> Firmware info not found 20-Mar-18 12:07:47 PM> 20-Mar-18 12:07:47 PM> Looking for EasyJTAG box... 20-Mar-18 12:07:47 PM> EasyJTAG API ver. 2022 20-Mar-18 12:07:47 PM> Setting IO Levels to 2.8V 20-Mar-18 12:07:47 PM> Setting frequence to 42 Mhz 20-Mar-18 12:07:47 PM> EasyJTAG Box Serial = 5B99395BEB0C6184 20-Mar-18 12:07:47 PM> EasyJTAG Box Firmware = 2.21 20-Mar-18 12:07:47 PM> Setting interface to EasyJtag2/E-Socket 20-Mar-18 12:07:47 PM> Setting bus width to 8 Bit 20-Mar-18 12:07:48 PM> Setting frequence to 42 Mhz 20-Mar-18 12:07:48 PM> eMMC Init returned = 0 20-Mar-18 12:07:48 PM> EMMC Device Information : 20-Mar-18 12:07:48 PM> EMMC CID: 1501004B3758564D42016DF4EAA8818B 20-Mar-18 12:07:48 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D 20-Mar-18 12:07:48 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: K7XVMB , EMMC NAME (HEX): 4B3758564D42 , S/N: 6DF4EAA8 , rev. 0x01 20-Mar-18 12:07:48 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 8/2014 20-Mar-18 12:07:48 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) 20-Mar-18 12:07:48 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 20-Mar-18 12:07:48 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000) 20-Mar-18 12:07:48 PM> EMMC Permanent Write Protection: No 20-Mar-18 12:07:48 PM> EMMC Temporary Write Protection: No 20-Mar-18 12:07:48 PM> Extended CSD Information : 20-Mar-18 12:07:48 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 20-Mar-18 12:07:48 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 20-Mar-18 12:07:48 PM> Boot Bus Config: 0x00 , width 1bit 20-Mar-18 12:07:48 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 20-Mar-18 12:07:48 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 20-Mar-18 12:07:48 PM> Device supports partitioning features 20-Mar-18 12:07:48 PM> Device can have enhanced technological features in partitions and user data area 20-Mar-18 12:07:48 PM> Device can have extended partitions attribute 20-Mar-18 12:07:48 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 20-Mar-18 12:07:48 PM> Backup saved: K7XVMB_6DF4EAA8_20180320_120748.extcsd 20-Mar-18 12:07:48 PM> EMMC Init completed. 20-Mar-18 12:07:48 PM> 20-Mar-18 12:07:48 PM> Opening file: J:\Aqua-Series\Star5.0\Intex_AquaStar5.0_W880_M01_S06a_140909\MT6582_Android_scatter.txt 20-Mar-18 12:07:48 PM> 20-Mar-18 12:07:48 PM> The new format of scatter 20-Mar-18 12:07:48 PM> config_version: V1.1.1 20-Mar-18 12:07:48 PM> platform: MT6582 20-Mar-18 12:07:52 PM> preloader_techain82_wet_kk.bin 20-Mar-18 12:07:52 PM> Found 3 supported eMMC CID: 20-Mar-18 12:07:52 PM> name = 'K7XVMB' hex = 0x4B3758564D42 [SAMSUNG] 20-Mar-18 12:07:52 PM> moviNAND_KMK7X000VM-B314/8GB+LPDDR2 8Gb(x32) @FBGA162 20-Mar-18 12:07:52 PM> name = 'K5WVMB' hex = 0x4B3557564D42 [SAMSUNG] 20-Mar-18 12:07:52 PM> moviNAND_KMK5W000VM-B312/4GB @FBGA162 20-Mar-18 12:07:52 PM> moviNAND_KMK5W000VM-B312/8GB @FBGA162 20-Mar-18 12:07:52 PM> name = 'SEM04G' hex = 0x53454D303447 [SANDISK] 20-Mar-18 12:07:52 PM> iNAND_SD5D14A-4G @FBGA153 20-Mar-18 12:07:52 PM> iNAND_SD5D26B-4G @FBGA162 20-Mar-18 12:07:52 PM> iNAND_SD5D28B-4G @FBGA162 20-Mar-18 12:07:52 PM> iNAND_SD5DH24A-4G @FBGA153 20-Mar-18 12:07:52 PM> iNAND_SD5DH26A-4G @FBGA153 20-Mar-18 12:07:52 PM> iNAND_SD7DP26A-4G @FBGA153 20-Mar-18 12:07:52 PM> iNAND_SDIN7DP2-4G @FBGA153 20-Mar-18 12:07:52 PM> 20-Mar-18 12:07:52 PM> The size of the last section has been updated 20-Mar-18 12:07:59 PM> 20-Mar-18 12:07:59 PM> Looking for EasyJTAG box... 20-Mar-18 12:07:59 PM> EasyJTAG API ver. 2022 20-Mar-18 12:07:59 PM> Setting IO Levels to 2.8V 20-Mar-18 12:07:59 PM> Setting frequence to 42 Mhz 20-Mar-18 12:07:59 PM> EasyJTAG Box Serial = 5B99395BEB0C6184 20-Mar-18 12:07:59 PM> EasyJTAG Box Firmware = 2.21 20-Mar-18 12:08:00 PM> Setting interface to EasyJtag2/E-Socket 20-Mar-18 12:08:00 PM> Setting bus width to 8 Bit 20-Mar-18 12:08:00 PM> Setting frequence to 42 Mhz 20-Mar-18 12:08:00 PM> eMMC Init returned = 0 20-Mar-18 12:08:00 PM> EMMC Device Information : 20-Mar-18 12:08:00 PM> EMMC CID: 1501004B3758564D42016DF4EAA8818B 20-Mar-18 12:08:00 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D 20-Mar-18 12:08:00 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: K7XVMB , EMMC NAME (HEX): 4B3758564D42 , S/N: 6DF4EAA8 , rev. 0x01 20-Mar-18 12:08:00 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 8/2014 20-Mar-18 12:08:00 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) 20-Mar-18 12:08:00 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 20-Mar-18 12:08:00 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000) 20-Mar-18 12:08:00 PM> EMMC Permanent Write Protection: No 20-Mar-18 12:08:00 PM> EMMC Temporary Write Protection: No 20-Mar-18 12:08:00 PM> Extended CSD Information : 20-Mar-18 12:08:00 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 20-Mar-18 12:08:00 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 20-Mar-18 12:08:00 PM> Boot Bus Config: 0x00 , width 1bit 20-Mar-18 12:08:00 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 20-Mar-18 12:08:00 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 20-Mar-18 12:08:00 PM> Device supports partitioning features 20-Mar-18 12:08:00 PM> Device can have enhanced technological features in partitions and user data area 20-Mar-18 12:08:00 PM> Device can have extended partitions attribute 20-Mar-18 12:08:00 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 20-Mar-18 12:08:00 PM> Backup saved: K7XVMB_6DF4EAA8_20180320_120800.extcsd 20-Mar-18 12:08:00 PM> EMMC Init completed. 20-Mar-18 12:08:00 PM> 20-Mar-18 12:08:00 PM> Operation: Write by vendor (MediaTek) 20-Mar-18 12:08:00 PM> 20-Mar-18 12:08:03 PM> Partition name: PRELOADER 20-Mar-18 12:08:03 PM> Filename: preloader_techain82_wet_kk.bin , Offset: 000000000000 , filesize: 117652 bytes 20-Mar-18 12:08:03 PM> eMMC switching to ROM2 20-Mar-18 12:08:03 PM> Erasing partition... 20-Mar-18 12:08:04 PM> Writing partition... 20-Mar-18 12:08:04 PM> Done writing partition. Write speed: 1946.59 KB/s 20-Mar-18 12:08:04 PM> Partition name: MBR 20-Mar-18 12:08:04 PM> Filename: MBR , Offset: 000000880000 , filesize: 512 bytes 20-Mar-18 12:08:04 PM> eMMC switching to ROM1 20-Mar-18 12:08:05 PM> Erasing partition... 20-Mar-18 12:08:05 PM> Writing partition... 20-Mar-18 12:08:05 PM> Done writing partition. Write speed: 90.54 KB/s 20-Mar-18 12:08:05 PM> Partition name: EBR1 20-Mar-18 12:08:05 PM> Filename: EBR1 , Offset: 000000900000 , filesize: 512 bytes 20-Mar-18 12:08:05 PM> eMMC switching to ROM1 20-Mar-18 12:08:05 PM> Erasing partition... 20-Mar-18 12:08:06 PM> Writing partition... 20-Mar-18 12:08:06 PM> Done writing partition. Write speed: 93.35 KB/s 20-Mar-18 12:08:06 PM> Partition name: UBOOT 20-Mar-18 12:08:06 PM> Filename: lk.bin , Offset: 0000025A0000 , filesize: 251360 bytes 20-Mar-18 12:08:06 PM> eMMC switching to ROM1 20-Mar-18 12:08:06 PM> Erasing partition... 20-Mar-18 12:08:07 PM> Writing partition... 20-Mar-18 12:08:07 PM> Done writing partition. Write speed: 5241.49 KB/s 20-Mar-18 12:08:07 PM> Partition name: BOOTIMG 20-Mar-18 12:08:07 PM> Filename: boot.img , Offset: 000002600000 , filesize: 5689344 bytes 20-Mar-18 12:08:07 PM> eMMC switching to ROM1 20-Mar-18 12:08:07 PM> Erasing partition... 20-Mar-18 12:08:07 PM> Writing partition... 20-Mar-18 12:08:08 PM> Done writing partition. Write speed: 17766.14 KB/s 20-Mar-18 12:08:08 PM> Partition name: RECOVERY 20-Mar-18 12:08:08 PM> Filename: recovery.img , Offset: 000003600000 , filesize: 6064128 bytes 20-Mar-18 12:08:08 PM> eMMC switching to ROM1 20-Mar-18 12:08:08 PM> Erasing partition... 20-Mar-18 12:08:08 PM> Writing partition... 20-Mar-18 12:08:09 PM> Done writing partition. Write speed: 17582.80 KB/s 20-Mar-18 12:08:09 PM> Partition name: SEC_RO 20-Mar-18 12:08:09 PM> Filename: secro.img , Offset: 000004600000 , filesize: 135168 bytes 20-Mar-18 12:08:09 PM> eMMC switching to ROM1 20-Mar-18 12:08:09 PM> Erasing partition... 20-Mar-18 12:08:09 PM> Writing partition... 20-Mar-18 12:08:09 PM> Done writing partition. Write speed: 8531.02 KB/s 20-Mar-18 12:08:09 PM> Partition name: LOGO 20-Mar-18 12:08:09 PM> Filename: logo.bin , Offset: 000004C80000 , filesize: 334199 bytes 20-Mar-18 12:08:09 PM> eMMC switching to ROM1 20-Mar-18 12:08:09 PM> Erasing partition... 20-Mar-18 12:08:10 PM> Writing partition... 20-Mar-18 12:08:10 PM> Done writing partition. Write speed: 6824.33 KB/s 20-Mar-18 12:08:10 PM> Partition name: EBR2 20-Mar-18 12:08:10 PM> Filename: EBR2 , Offset: 000004F80000 , filesize: 512 bytes 20-Mar-18 12:08:10 PM> eMMC switching to ROM1 20-Mar-18 12:08:10 PM> Erasing partition... 20-Mar-18 12:08:11 PM> Writing partition... 20-Mar-18 12:08:11 PM> Done writing partition. Write speed: 169.23 KB/s 20-Mar-18 12:08:11 PM> Partition name: ANDROID 20-Mar-18 12:08:11 PM> Filename: system.img , Offset: 000005A00000 , filesize: 912037036 bytes 20-Mar-18 12:08:11 PM> eMMC switching to ROM1 20-Mar-18 12:08:11 PM> Erasing partition... 20-Mar-18 12:08:13 PM> Writing partition... 20-Mar-18 12:08:13 PM> Sparse image found v.1.0 Total chunks: 1804 20-Mar-18 12:10:37 PM> Done writing partition. Write speed: 6179.46 KB/s 20-Mar-18 12:10:37 PM> Partition name: CACHE 20-Mar-18 12:10:37 PM> Filename: cache.img , Offset: 00003DE00000 , filesize: 6316180 bytes 20-Mar-18 12:10:37 PM> eMMC switching to ROM1 20-Mar-18 12:10:37 PM> Erasing partition... 20-Mar-18 12:10:38 PM> Writing partition... 20-Mar-18 12:10:38 PM> Sparse image found v.1.0 Total chunks: 10 20-Mar-18 12:10:39 PM> Done writing partition. Write speed: 5297.52 KB/s 20-Mar-18 12:10:39 PM> Partition name: USRDATA 20-Mar-18 12:10:39 PM> Filename: userdata.img , Offset: 000045C00000 , filesize: 16277940 bytes 20-Mar-18 12:10:39 PM> eMMC switching to ROM1 20-Mar-18 12:10:39 PM> Erasing partition... 20-Mar-18 12:10:42 PM> Writing partition... 20-Mar-18 12:10:42 PM> Sparse image found v.1.0 Total chunks: 34 20-Mar-18 12:10:44 PM> Done writing partition. Write speed: 6664.53 KB/s 20-Mar-18 12:10:44 PM> 20-Mar-18 12:10:44 PM> Partition PROTECT_F : formatting as EXT4. Please wait ... 20-Mar-18 12:10:45 PM> Formatting completed 20-Mar-18 12:10:45 PM> Partition PROTECT_S : formatting as EXT4. Please wait ... 20-Mar-18 12:10:45 PM> Formatting completed 20-Mar-18 12:10:45 PM> 20-Mar-18 12:10:45 PM> Writing DL_Info... 20-Mar-18 12:10:45 PM> Writing DL_Info done 20-Mar-18 12:10:45 PM> 20-Mar-18 12:10:45 PM> Writing eMMC Register ... 20-Mar-18 12:10:45 PM> Reg: 179 Value: 0x48 20-Mar-18 12:10:45 PM> Reg: 177 Value: 0x00 20-Mar-18 12:10:46 PM> 20-Mar-18 12:10:46 PM> All done time: [00:02:43:117] 20-Mar-18 12:10:46 PM> 20-Mar-18 12:11:29 PM> Looking for EasyJTAG box... 20-Mar-18 12:11:29 PM> EasyJTAG API ver. 2022 20-Mar-18 12:11:29 PM> Setting IO Levels to 2.8V 20-Mar-18 12:11:29 PM> Setting frequence to 42 Mhz 20-Mar-18 12:11:29 PM> EasyJTAG Box Serial = 5B99395BEB0C6184 20-Mar-18 12:11:29 PM> EasyJTAG Box Firmware = 2.21 20-Mar-18 12:11:29 PM> Setting interface to EasyJtag2/E-Socket 20-Mar-18 12:11:29 PM> Setting bus width to 8 Bit 20-Mar-18 12:11:29 PM> Setting frequence to 42 Mhz 20-Mar-18 12:11:29 PM> eMMC Init returned = 0 20-Mar-18 12:11:29 PM> EMMC Device Information : 20-Mar-18 12:11:29 PM> EMMC CID: 1501004B3758564D42016DF4EAA8818B 20-Mar-18 12:11:29 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D 20-Mar-18 12:11:29 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: K7XVMB , EMMC NAME (HEX): 4B3758564D42 , S/N: 6DF4EAA8 , rev. 0x01 20-Mar-18 12:11:29 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 8/2014 20-Mar-18 12:11:29 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) 20-Mar-18 12:11:29 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 20-Mar-18 12:11:29 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000) 20-Mar-18 12:11:29 PM> EMMC Permanent Write Protection: No 20-Mar-18 12:11:29 PM> EMMC Temporary Write Protection: No 20-Mar-18 12:11:29 PM> Extended CSD Information : 20-Mar-18 12:11:30 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 20-Mar-18 12:11:30 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 20-Mar-18 12:11:30 PM> Boot Bus Config: 0x00 , width 1bit 20-Mar-18 12:11:30 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 20-Mar-18 12:11:30 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 20-Mar-18 12:11:30 PM> Device supports partitioning features 20-Mar-18 12:11:30 PM> Device can have enhanced technological features in partitions and user data area 20-Mar-18 12:11:30 PM> Device can have extended partitions attribute 20-Mar-18 12:11:30 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 20-Mar-18 12:11:30 PM> Backup saved: K7XVMB_6DF4EAA8_20180320_121130.extcsd 20-Mar-18 12:11:30 PM> EMMC Init completed. 20-Mar-18 12:11:30 PM> 20-Mar-18 12:11:30 PM> Scanning soft partitions 20-Mar-18 12:11:30 PM> MBR header is found. Analyzing data ... 20-Mar-18 12:11:30 PM> EBR detected at address: 000000080000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p0 [000000900000 - 000001300000], size: 000000A00000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p1 [000001300000 - 000001D00000], size: 000000A00000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p2 [000003D80000 - 000004380000], size: 000000600000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p3 [000005180000 - 00003D580000], size: 000038400000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p4 [00003D580000 - 000045380000], size: 000007E00000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p5 [000045380000 - 00007A780000], size: 000035400000 20-Mar-18 12:11:30 PM> Partition: mmcblk0p6 [00007A780000 - 02000007FE00], size: 01FF858FFE00 20-Mar-18 12:11:30 PM> MBR header successfully parsed 20-Mar-18 12:11:30 PM> 20-Mar-18 12:11:30 PM> Get firmware version 20-Mar-18 12:11:30 PM> 20-Mar-18 12:11:30 PM> Brand = Intex 20-Mar-18 12:11:30 PM> Manufacturer = Intex 20-Mar-18 12:11:30 PM> Model = Aqua Star 5.0 20-Mar-18 12:11:30 PM> CPU Abi = armeabi-v7a 20-Mar-18 12:11:30 PM> Mediatek platform = MT6582 20-Mar-18 12:11:30 PM> Android release = 4.4.2 20-Mar-18 12:11:30 PM> Firmware version = Intex_AquaStar5.0_V06_Indian_SER 20-Mar-18 12:11:30 PM> Firmware date = 2014? 09? 09? ??? 16:29:21 CST 20-Mar-18 12:26:41 PM> 20-Mar-18 12:26:41 PM> Looking for EasyJTAG box... 20-Mar-18 12:26:41 PM> EasyJTAG API ver. 2022 20-Mar-18 12:26:41 PM> Setting IO Levels to 2.8V 20-Mar-18 12:26:41 PM> Setting frequence to 42 Mhz 20-Mar-18 12:26:41 PM> EasyJTAG Box Serial = 5B99395BEB0C6184 20-Mar-18 12:26:41 PM> EasyJTAG Box Firmware = 2.21 20-Mar-18 12:26:41 PM> Setting interface to EasyJtag2/E-Socket 20-Mar-18 12:26:41 PM> Setting bus width to 8 Bit 20-Mar-18 12:26:42 PM> Setting frequence to 42 Mhz 20-Mar-18 12:26:42 PM> eMMC Init returned = 0 20-Mar-18 12:26:42 PM> EMMC Device Information : 20-Mar-18 12:26:42 PM> EMMC CID: 1501004B3758564D42016DF4EAA8818B 20-Mar-18 12:26:42 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D 20-Mar-18 12:26:42 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: K7XVMB , EMMC NAME (HEX): 4B3758564D42 , S/N: 6DF4EAA8 , rev. 0x01 20-Mar-18 12:26:42 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 8/2014 20-Mar-18 12:26:42 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) 20-Mar-18 12:26:42 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 20-Mar-18 12:26:42 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000) 20-Mar-18 12:26:42 PM> EMMC Permanent Write Protection: No 20-Mar-18 12:26:42 PM> EMMC Temporary Write Protection: No 20-Mar-18 12:26:42 PM> Extended CSD Information : 20-Mar-18 12:26:42 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 20-Mar-18 12:26:42 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1) 20-Mar-18 12:26:42 PM> Boot Bus Config: 0x00 , width 1bit 20-Mar-18 12:26:42 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled 20-Mar-18 12:26:42 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 20-Mar-18 12:26:42 PM> Device supports partitioning features 20-Mar-18 12:26:42 PM> Device can have enhanced technological features in partitions and user data area 20-Mar-18 12:26:42 PM> Device can have extended partitions attribute 20-Mar-18 12:26:42 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 20-Mar-18 12:26:42 PM> Backup saved: K7XVMB_6DF4EAA8_20180320_122642.extcsd 20-Mar-18 12:26:42 PM> EMMC Init completed. 20-Mar-18 12:26:42 PM> 20-Mar-18 12:26:42 PM> Scanning soft partitions 20-Mar-18 12:26:42 PM> MBR header is found. Analyzing data ... 20-Mar-18 12:26:42 PM> EBR detected at address: 000000080000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p0 [000000900000 - 000001300000], size: 000000A00000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p1 [000001300000 - 000001D00000], size: 000000A00000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p2 [000003D80000 - 000004380000], size: 000000600000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p3 [000005180000 - 00003D580000], size: 000038400000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p4 [00003D580000 - 000045380000], size: 000007E00000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p5 [000045380000 - 00007A780000], size: 000035400000 20-Mar-18 12:26:42 PM> Partition: mmcblk0p6 [00007A780000 - 02000007FE00], size: 01FF858FFE00 20-Mar-18 12:26:42 PM> MBR header successfully parsed 20-Mar-18 12:26:42 PM> 20-Mar-18 12:26:42 PM> Get firmware version 20-Mar-18 12:26:42 PM> 20-Mar-18 12:26:42 PM> Brand = Intex 20-Mar-18 12:26:42 PM> Manufacturer = Intex 20-Mar-18 12:26:42 PM> Model = Aqua Star 5.0 20-Mar-18 12:26:42 PM> CPU Abi = armeabi-v7a 20-Mar-18 12:26:42 PM> Mediatek platform = MT6582 20-Mar-18 12:26:42 PM> Android release = 4.4.2 20-Mar-18 12:26:42 PM> Firmware version = Intex_AquaStar5.0_V06_Indian_SER 20-Mar-18 12:26:42 PM> Firmware date = 2014? 09? 09? ??? 16:29:21 CST |
The Following User Says Thank You to Deepesh Sharma For This Useful Post: |
03-21-2018, 07:44 | #618 (permalink) |
No Life Poster Join Date: Aug 2011
Posts: 576
Member: 1630066 Status: Offline Sonork: 520074 Thanks Meter: 215 | HUAWEI G6-U10 DEAD RECOVERD 21-Mar-18 10:49:15 AM> HiPower mode is OFF 21-Mar-18 10:49:15 AM> Frequence: 21 Mhz 21-Mar-18 10:49:15 AM> CMD Pullup Level: 175 mV 21-Mar-18 10:49:15 AM> CMD Active Level: 2516 mV 21-Mar-18 10:49:15 AM> eMMC Init returned = 0 21-Mar-18 10:49:15 AM> EMMC Device Information : 21-Mar-18 10:49:15 AM> EMMC CID: 90014A4834473164040300A5C28F510E 21-Mar-18 10:49:15 AM> EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 21-Mar-18 10:49:15 AM> EMMC Manufacture Name: SKHYNIX 21-Mar-18 10:49:15 AM> EMMC Manufacture ID: 0x90 , OEM ID: 014A 21-Mar-18 10:49:15 AM> EMMC Manufacture Date: 5/2014 , Rev: 03 21-Mar-18 10:49:15 AM> EMMC NAME: H4G1d , S/N: 00A5C28F , rev. 03 21-Mar-18 10:49:15 AM> EMMC NAME (HEX): 483447316404 21-Mar-18 10:49:15 AM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) 21-Mar-18 10:49:15 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 21-Mar-18 10:49:15 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) 21-Mar-18 10:49:15 AM> EMMC Permanent Write Protection: No 21-Mar-18 10:49:15 AM> EMMC Temporary Write Protection: No 21-Mar-18 10:49:15 AM> Extended CSD Information : 21-Mar-18 10:49:15 AM> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 21-Mar-18 10:49:15 AM> Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area) 21-Mar-18 10:49:15 AM> Boot Bus Config: 0x00 , width 1bit 21-Mar-18 10:49:15 AM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled 21-Mar-18 10:49:15 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 21-Mar-18 10:49:15 AM> Device supports partitioning features 21-Mar-18 10:49:15 AM> Device can have enhanced technological features in partitions and user data area 21-Mar-18 10:49:15 AM> Device can have extended partitions attribute 21-Mar-18 10:49:15 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 21-Mar-18 10:49:15 AM> Backup saved: H4G1d_00A5C28F_20180321_104915.extcsd 21-Mar-18 10:49:15 AM> EMMC Init completed. 21-Mar-18 10:49:15 AM> 21-Mar-18 10:49:15 AM> Erasing for: ROM1 , start: 0x000000000000 , size: 0x0000E9000000 21-Mar-18 10:49:15 AM> eMMC switching to ROM1 21-Mar-18 10:49:16 AM> Erasing partition... 21-Mar-18 10:51:29 AM> Done erasing partition. 21-Mar-18 10:52:50 AM> 21-Mar-18 10:52:50 AM> Opening file: C:\Users\CHAND\Desktop\HUAWEI_G6-U10\rawprogram0.xml 21-Mar-18 10:52:50 AM> 21-Mar-18 10:52:50 AM> The size of the last section has been updated 21-Mar-18 10:53:29 AM> 21-Mar-18 10:53:29 AM> Looking for EasyJTAG box... 21-Mar-18 10:53:29 AM> EasyJTAG API ver. 2008 21-Mar-18 10:53:29 AM> Setting IO Levels to 2.8V 21-Mar-18 10:53:29 AM> Setting frequence to 21 Mhz 21-Mar-18 10:53:29 AM> HiPower mode is ON 21-Mar-18 10:53:30 AM> OpenUSB returned = 0 21-Mar-18 10:53:30 AM> Power Controller returned = 0 21-Mar-18 10:53:31 AM> EasyJTAG Box Serial = 0A0050225B0FD73F 21-Mar-18 10:53:31 AM> EasyJTAG Box Firmware = 01.62 21-Mar-18 10:53:31 AM> HiPower mode is ON 21-Mar-18 10:53:31 AM> Frequence: 21 Mhz 21-Mar-18 10:53:31 AM> CMD Pullup Level: 165 mV 21-Mar-18 10:53:31 AM> CMD Active Level: 2526 mV 21-Mar-18 10:53:31 AM> eMMC Init returned = 0 21-Mar-18 10:53:31 AM> EMMC Device Information : 21-Mar-18 10:53:31 AM> EMMC CID: 90014A4834473164040300A5C28F510E 21-Mar-18 10:53:31 AM> EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D2 21-Mar-18 10:53:31 AM> EMMC Manufacture Name: SKHYNIX 21-Mar-18 10:53:31 AM> EMMC Manufacture ID: 0x90 , OEM ID: 014A 21-Mar-18 10:53:31 AM> EMMC Manufacture Date: 5/2014 , Rev: 03 21-Mar-18 10:53:31 AM> EMMC NAME: H4G1d , S/N: 00A5C28F , rev. 03 21-Mar-18 10:53:31 AM> EMMC NAME (HEX): 483447316404 21-Mar-18 10:53:31 AM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000) 21-Mar-18 10:53:31 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 21-Mar-18 10:53:31 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) 21-Mar-18 10:53:31 AM> EMMC Permanent Write Protection: No 21-Mar-18 10:53:31 AM> EMMC Temporary Write Protection: No 21-Mar-18 10:53:31 AM> Extended CSD Information : 21-Mar-18 10:53:31 AM> Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51) 21-Mar-18 10:53:31 AM> Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area) 21-Mar-18 10:53:31 AM> Boot Bus Config: 0x00 , width 1bit 21-Mar-18 10:53:31 AM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled 21-Mar-18 10:53:31 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 21-Mar-18 10:53:31 AM> Device supports partitioning features 21-Mar-18 10:53:31 AM> Device can have enhanced technological features in partitions and user data area 21-Mar-18 10:53:31 AM> Device can have extended partitions attribute 21-Mar-18 10:53:31 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01 21-Mar-18 10:53:31 AM> Backup saved: H4G1d_00A5C28F_20180321_105331.extcsd 21-Mar-18 10:53:31 AM> EMMC Init completed. 21-Mar-18 10:53:31 AM> 21-Mar-18 10:53:31 AM> Operation: Write by vendor (Qualcomm/HiSilicon) 21-Mar-18 10:53:32 AM> 21-Mar-18 10:53:32 AM> Creating GPT-partitioninig 21-Mar-18 10:53:32 AM> GPT-partitioning done 21-Mar-18 10:53:32 AM> 21-Mar-18 10:53:32 AM> Partition name: sbl1 21-Mar-18 10:53:32 AM> Filename: sbl1.mbn , Offset: 000000004400 , filesize: 299008 bytes 21-Mar-18 10:53:32 AM> eMMC switching to ROM1 21-Mar-18 10:53:32 AM> Erasing partition... 21-Mar-18 10:53:33 AM> Writing partition... 21-Mar-18 10:53:33 AM> Done writing partition. Write speed: 416.64 Kb/s 21-Mar-18 10:53:34 AM> Partition name: rpm 21-Mar-18 10:53:34 AM> Filename: rpm.mbn , Offset: 000000800000 , filesize: 147456 bytes 21-Mar-18 10:53:34 AM> eMMC switching to ROM1 21-Mar-18 10:53:34 AM> Erasing partition... 21-Mar-18 10:53:35 AM> Writing partition... 21-Mar-18 10:53:35 AM> Done writing partition. Write speed: 738.94 Kb/s 21-Mar-18 10:53:35 AM> Partition name: tz 21-Mar-18 10:53:35 AM> Filename: tz.mbn , Offset: 00000087D000 , filesize: 339968 bytes 21-Mar-18 10:53:35 AM> eMMC switching to ROM1 21-Mar-18 10:53:35 AM> Erasing partition... 21-Mar-18 10:53:36 AM> Writing partition... 21-Mar-18 10:53:36 AM> Done writing partition. Write speed: 896.88 Kb/s 21-Mar-18 10:53:36 AM> Partition name: aboot 21-Mar-18 10:53:36 AM> Filename: emmc_appsboot.mbn , Offset: 0000008FA000 , filesize: 5726208 bytes 21-Mar-18 10:53:36 AM> eMMC switching to ROM1 21-Mar-18 10:53:36 AM> Erasing partition... 21-Mar-18 10:53:37 AM> Writing partition... 21-Mar-18 10:53:41 AM> Done writing partition. Write speed: 1329.97 Kb/s 21-Mar-18 10:53:41 AM> Partition name: modem 21-Mar-18 10:53:41 AM> Filename: NON-HLOS.bin , Offset: 000005800000 , filesize: 99246080 bytes 21-Mar-18 10:53:41 AM> eMMC switching to ROM1 21-Mar-18 10:53:41 AM> Erasing partition... 21-Mar-18 10:53:45 AM> Writing partition... 21-Mar-18 10:55:34 AM> Done writing partition. Write speed: 895.17 Kb/s 21-Mar-18 10:55:34 AM> Partition name: persist 21-Mar-18 10:55:34 AM> Filename: persist.img , Offset: 000012000000 , filesize: 82044 bytes 21-Mar-18 10:55:34 AM> eMMC switching to ROM1 21-Mar-18 10:55:34 AM> Erasing partition... 21-Mar-18 10:55:35 AM> Writing partition... 21-Mar-18 10:55:35 AM> Sparse image found v.1.0 Total chunks: 8 21-Mar-18 10:55:35 AM> Done writing partition. Write speed: 1016.41 Kb/s 21-Mar-18 10:55:35 AM> Partition name: boot 21-Mar-18 10:55:35 AM> Filename: boot.img , Offset: 000012800000 , filesize: 12034048 bytes 21-Mar-18 10:55:35 AM> eMMC switching to ROM1 21-Mar-18 10:55:35 AM> Erasing partition... 21-Mar-18 10:55:36 AM> Writing partition... 21-Mar-18 10:55:50 AM> Done writing partition. Write speed: 814.47 Kb/s 21-Mar-18 10:55:50 AM> Partition name: recovery 21-Mar-18 10:55:50 AM> Filename: recovery.img , Offset: 000013400000 , filesize: 13213696 bytes 21-Mar-18 10:55:50 AM> eMMC switching to ROM1 21-Mar-18 10:55:50 AM> Erasing partition... 21-Mar-18 10:55:51 AM> Writing partition... 21-Mar-18 10:56:07 AM> Done writing partition. Write speed: 824.16 Kb/s 21-Mar-18 10:56:07 AM> Partition name: cust 21-Mar-18 10:56:07 AM> Filename: cust.img , Offset: 000014400000 , filesize: 268435456 bytes 21-Mar-18 10:56:07 AM> eMMC switching to ROM1 21-Mar-18 10:56:07 AM> Erasing partition... 21-Mar-18 10:56:17 AM> Writing partition... 21-Mar-18 11:01:02 AM> Done writing partition. Write speed: 917.72 Kb/s 21-Mar-18 11:01:02 AM> Partition name: cache 21-Mar-18 11:01:02 AM> Filename: cache.img , Offset: 000024400000 , filesize: 5873872 bytes 21-Mar-18 11:01:03 AM> eMMC switching to ROM1 21-Mar-18 11:01:03 AM> Erasing partition... 21-Mar-18 11:01:10 AM> Writing partition... 21-Mar-18 11:01:10 AM> Sparse image found v.1.0 Total chunks: 15 21-Mar-18 11:01:14 AM> Done writing partition. Write speed: 1471.53 Kb/s 21-Mar-18 11:01:14 AM> Partition name: misc 21-Mar-18 11:01:14 AM> Filename: misc.img , Offset: 000030400000 , filesize: 262144 bytes 21-Mar-18 11:01:14 AM> eMMC switching to ROM1 21-Mar-18 11:01:14 AM> Erasing partition... 21-Mar-18 11:01:15 AM> Writing partition... 21-Mar-18 11:01:15 AM> Done writing partition. Write speed: 1385.83 Kb/s 21-Mar-18 11:01:15 AM> Partition name: userdata 21-Mar-18 11:01:15 AM> Filename: userdata.img , Offset: 000070800000 , filesize: 19251660 bytes 21-Mar-18 11:01:15 AM> eMMC switching to ROM1 21-Mar-18 11:01:15 AM> Erasing partition... 21-Mar-18 11:01:54 AM> Writing partition... 21-Mar-18 11:01:54 AM> Sparse image found v.1.0 Total chunks: 36 21-Mar-18 11:02:07 AM> Done writing partition. Write speed: 1495.49 Kb/s 21-Mar-18 11:02:07 AM> 21-Mar-18 11:02:07 AM> All done |
03-21-2018, 08:53 | #619 (permalink) |
No Life Poster Join Date: Feb 2009 Location: guangzhou-China
Posts: 967
Member: 973222 Status: Offline Sonork: 100.1584595 Thanks Meter: 792 | I think most z3x box users need buy one "easy draw"-most professional drawing only for English language . Easy Draw software - GSM-Forum |
The Following 2 Users Say Thank You to gsmharbour For This Useful Post: |
03-27-2018, 04:51 | #620 (permalink) | |
No Life Poster Join Date: Jul 2015 Location: India
Posts: 597
Member: 2421242 Status: Offline Sonork: 100.1614558 Thanks Meter: 700 | Coolpad 8297-L100 Flashing Stuck on 11% Recover Done Thanks Mr.royalnasim Logs............... Quote:
| |
The Following 2 Users Say Thank You to 4G Telecom For This Useful Post: |
03-27-2018, 06:13 | #621 (permalink) |
No Life Poster Join Date: May 2010 Location: Incredible-India
Posts: 6,018
Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297 | Micromax D321 Dead Recover With Change Emmc to Samsung My 1st Micromax D321 Dead Recover With Chnage Emmc Skhynix To Samsung Image-1 Image-2 Image-3 Repair Log Thanks Easy Jtag Team |
The Following 3 Users Say Thank You to Deepesh Sharma For This Useful Post: |
04-06-2018, 13:06 | #626 (permalink) | |
No Life Poster Join Date: Jul 2015 Location: India
Posts: 597
Member: 2421242 Status: Offline Sonork: 100.1614558 Thanks Meter: 700 | One more Coolpad 8297-l100 Dead recovered Quote:
| |
04-10-2018, 05:03 | #628 (permalink) |
No Life Poster Join Date: May 2010 Location: Incredible-India
Posts: 6,018
Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297 | Samsung J210F (J2-6)Dead Repair Emmc Done Read All BAckup Custmer Need All Image Image Recover Done Code: 08-Apr-18 5:23:49 PM> Looking for EasyJTAG box... 08-Apr-18 5:23:49 PM> EasyJTAG API ver. 2022 08-Apr-18 5:23:49 PM> Setting IO Levels to 2.8V 08-Apr-18 5:23:49 PM> Setting frequence to 36 Mhz 08-Apr-18 5:23:49 PM> EasyJTAG Box Serial = 5B99395BEB0C6184 08-Apr-18 5:23:49 PM> EasyJTAG Box Firmware = 2.21 08-Apr-18 5:23:49 PM> Setting interface to EasyJtag2/ISP 08-Apr-18 5:23:49 PM> Setting bus width to 1 Bit 08-Apr-18 5:23:50 PM> Setting frequence to 36 Mhz 08-Apr-18 5:23:50 PM> CMD Pullup Level: 2036 mV 08-Apr-18 5:23:50 PM> CMD Active Level: 2635 mV 08-Apr-18 5:23:50 PM> eMMC Init returned = 0 08-Apr-18 5:23:50 PM> EMMC Device Information : 08-Apr-18 5:23:50 PM> EMMC CID: 150100514E3136424200023ED45B14E1 08-Apr-18 5:23:50 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D 08-Apr-18 5:23:50 PM> EMMC Manufacture Name: SAMSUNG , EMMC NAME: QN16BB , EMMC NAME (HEX): 514E31364242 , S/N: 023ED45B , rev. 0x00 08-Apr-18 5:23:50 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Manufacture Date: 1/2017 08-Apr-18 5:23:50 PM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000) 08-Apr-18 5:23:50 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000) 08-Apr-18 5:23:50 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) 08-Apr-18 5:23:50 PM> EMMC Permanent Write Protection: No 08-Apr-18 5:23:50 PM> EMMC Temporary Write Protection: No 08-Apr-18 5:23:50 PM> Extended CSD Information : 08-Apr-18 5:23:50 PM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 08-Apr-18 5:23:50 PM> Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1) 08-Apr-18 5:23:50 PM> Boot Bus Config: 0x00 , width 1bit 08-Apr-18 5:23:50 PM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled 08-Apr-18 5:23:50 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07 08-Apr-18 5:23:50 PM> Device supports partitioning features 08-Apr-18 5:23:50 PM> Device can have enhanced technological features in partitions and user data area 08-Apr-18 5:23:50 PM> Device can have extended partitions attribute 08-Apr-18 5:23:50 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00 08-Apr-18 5:23:50 PM> Backup saved: QN16BB_023ED45B_20180408_172350.extcsd 08-Apr-18 5:23:50 PM> EMMC Init completed. 08-Apr-18 5:23:50 PM> 08-Apr-18 5:23:50 PM> Scan from: QN16BB 08-Apr-18 5:23:50 PM> 08-Apr-18 5:23:50 PM> Vendor: Qualcomm 08-Apr-18 5:23:50 PM> Searching GPT ... 08-Apr-18 5:23:50 PM> GPT header is found and is valid 08-Apr-18 5:23:50 PM> 08-Apr-18 5:23:51 PM> GPT header successfully parsed 08-Apr-18 5:23:51 PM> 08-Apr-18 5:23:51 PM> Scan done 08-Apr-18 5:23:51 PM> 08-Apr-18 5:23:51 PM> Mount [efs] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> Mount [productinfo] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> Mount [PERSDATA] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> Mount [cache] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> Mount [system] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> Mount [HIDDEN] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> Mount [data] successfully PartType: LINUX 08-Apr-18 5:23:51 PM> 08-Apr-18 5:24:13 PM> Saving object: [DCIM] 08-Apr-18 5:26:11 PM> Completed: [00:01:58:255] 08-Apr-18 5:26:11 PM> 08-Apr-18 5:26:11 PM> All done 08-Apr-18 5:26:12 PM> 08-Apr-18 5:28:18 PM> Saving object: [WhatsApp Images] 08-Apr-18 5:28:23 PM> Completed: [00:00:05:715] Log-1 Log-2 Done Thanks YOu |
04-13-2018, 06:17 | #629 (permalink) |
No Life Poster Join Date: May 2010 Location: Incredible-India
Posts: 6,018
Member: 1301233 Status: Offline Sonork: Closed Thanks Meter: 9,297 | Lyf F81e(Jio KeyPaid Phone) Stuck On Logo(Kaios) Recover Done Lyf F81E Jio Keypiad Mobile Stuck On KaioS Recover Done Emmc Repair Image-1 Emmc Repair Recover Sucessfully |
The Following 3 Users Say Thank You to Deepesh Sharma For This Useful Post: |
04-13-2018, 14:21 | #630 (permalink) |
No Life Poster Join Date: Jul 2015 Location: India
Posts: 597
Member: 2421242 Status: Offline Sonork: 100.1614558 Thanks Meter: 700 | Samsung J210F Boot Repair Done PHP Code: |
Bookmarks |
| |
|