Successful test report by dereje staring U.M.T. [SUCCESS REPORTS]

[dereje]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM16 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7420 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:16
[Ultimate Samsung Flasher v0.9]


:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

world first Xiaomi Redmi Note 3 hard reset by umt qc fire

Searching for phone in sideload mode... Found
Device Id : kenzo
Version : V8.0.5.0.LHOCNDG
Code Base : 5.1.1
Ext Info : CN, zh, F
Formatting Data... Done
Operation Finished.




:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

world first Xiaomi Redmi Note 3 mi acount remove done

Operation : Mi Account Reset
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : RELINK HS-USB QDLoader 9008 (COM356)
Driver Info : Woowellstrong Electronic co.,ltd, cmnxusbser.sys, 2.1.0.3
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1009B00 [8976] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware : 8976, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Resetting Mi Account... Done
Operation Finished.
Remove cable, reconnect battery / hold Power Button ~15 seconds.


:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

Xiaomi Redmi Note 3 write firmware done by qc fire

Hardware ID : E1009B00 [8976] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware : 8976, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing NON-HLOS.bin ... Done
Writing sbl1.mbn ... Done
Writing sbl1.mbn ... Done
Writing rpm.mbn ... Done
Writing rpm.mbn ... Done
Writing tz.mbn ... Done
Writing tz.mbn ... Done
Writing hyp.mbn ... Done
Writing hyp.mbn ... Done
Writing adspso.bin ... Done
Writing splash.img ... Done
Writing emmc_appsboot.mbn ... Done
Writing emmc_appsboot.mbn ... Done
Writing boot.img ... Done
Writing recovery.img ... Done
Writing system.img ... Done
Writing cache.img ... Done
Writing misc.img ... Done
Writing mdtp.img ... Done
Writing cust.img ... Done
Writing userdata.img ... Done
Writing gpt_main0.bin ... Done
Writing gpt_backup0.bin ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

Exclusive & world first Galaxy Note Edge SM-N915T 6.0.1 unlock done by UMT

if ur phone have N915TUBU2DPF2 6.0.1 dont worry no need root just root with
CF-Auto-Root-tbltetmo-tbltetmo-smn915t

hit unlock




Port : COM17 : SAMSUNG Mobile USB Serial Port (COM17)
Baud Rate : 115200
Device : Samsung N915T
Operation : Unlock
Opening Port... OK
Reading Phone Information... OK
Compile :

Release : :46:29Oct 0 1 201414
Hw. Ver. : :00:00TA
ESN : B0000000
MEID : 00000000000000
IMEI : 355024060159192
Switching to Offline Mode... OK
Preparing Phone... OK
Unlocking Phone, Please wait... OK
Resetting Phone... OK
If Phone does not restart, do it manually.
Port Closed.
Operation Finished.
Elapsed Time: 00:05
[Module Ver. 3.5]
Log Saved to Logs\170227_202754.log


:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

first write any combination or tricks to enable adb file
then reset frp ufd method done by umt

Device: SM-A310F
Operation: Reset FRP
Searching for Device... Found
Model: SM-G532F
Baseband: G532FXXU1APJ9
Bootloader: G532FXXU1APJ9
PDA: G532FXXU1APJ9
Android Version: 6.0.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Tap Next > Next > Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:09
[Ultimate Samsung Flasher v1.0]




wbr:-dereje

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

SM-A310F 6.0.1 FRP DONE

FIRST PHONE HAVE A310FXXU2BPG6 DOWNGREAD TO 5.1.1 WITHOUT RISK THEN PACH AND DONE TNXS UMT

Device: SM-A310F
Operation: Apply FRP Patch
Port: COM8 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7580 [HiSpeed]
Applying Patch Data... . . . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Please install driver once SAMSUNG_Android Device is detected.
Once ADB Drivers are installed, use Reset FRP button.
Elapsed Time: 00:21
[Ultimate Samsung Flasher v1.0]



Device: SM-A310F
Operation: Reset FRP
Searching for Device... Found
Model: SM-A310F
Baseband: A310FXXU2APC5
Bootloader: A310FXXU2APC1
PDA: A310FXXU2APDC
Android Version: 5.1.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Tap Next > Next > Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:07
[Ultimate Samsung Flasher v1.0]


:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[dereje]

Lg K10 LTE android 6 frp suceess by umt

Port : COM81 : LGE Mobile USB Serial Port (COM81)
Baud Rate : 115200 (Auto)
Device : LG Android
Operation : FRP Reset (Universal)
Opening Port... OK
Reading Phone Information... OK
Model : LG-K430dsY
SW Ver. : LGK430dsYAT-00-V10d-AME-XX-JUL-15-2016
And. Ver. : 6.0
IMEI : 357713074396737
Prd. ID : CH32S160622000196
HW Ver. : rev_10
LAF Ver. : 1.1
Reading Partition Data... OK
Erasing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:05
[Module Ver. 3.6]
Log Saved to Logs\170404_140303.log

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[mortal90210]

HI ALL

MOTO G4 PLUS 7.0 FRP REMOVE IN FEW SEC.

Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Found
Model : Moto G (4)
Version : 7.0
Hardware : qcom
Baseband : M8952_70030.25.03.60R ATHENE_INDIA_DSDS_CUST
SIM Card : ABSENT,ABSENT
CPU : armeabi-v7a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:08
[Module Ver. 3.8]
Log Saved to Logs\170407_200841.log

THANK YOU

[Ph0nExperts]

MOTOROLA G4Plus 7.0 Nougat Successfully FRP cleared UMT 3.8 new BOMB
Thanks Team


Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Found
Model : Moto G (4)
Version : 7.0
Hardware : qcom
Baseband : M8952_70030.25.03.62R ATHENE_INDIA_DSDS_CUST
SIM Card : ABSENT,ABSENT
CPU : armeabi-v7a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:07
[Module Ver. 3.8]

[dereje]

Port : COM175 : SAMSUNG Mobile USB Serial Port (COM175)
Baud Rate : 115200
Device : Samsung G900T
Operation : Unlock
Opening Port... OK
Reading Phone Information... OK
Compile : Mar 25 2017 15:13:48
Release : Mar 17 2016 23:00:00
Hw. Ver. : AAAAANRZ
ESN : B0000000
MEID : 00000000000000
IMEI : 351881068305778
Switching to Offline Mode... OK
Preparing Phone... OK
Unlocking Phone, Please wait... OK
Resetting Phone... OK
If Phone does not restart, do it manually.
Port Closed.
Operation Finished.
Elapsed Time: 00:05
[Module Ver. 3.6]
Log Saved to Logs\170418_132055.log

[dereje]

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM8 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:16
[Ultimate Samsung Flasher v1.0]




:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[nahidroman]

samsung sm-j111f frp reset done

[dereje]

world first real solution HTC Desire 728G dual sim 5.1 ver 1.08.401.3 frp done by umt

Port : ADB Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Motorola FRP Reset
Searching for Device... Found
Model : HTC Desire 728G dual sim
Version : 5.1
Hardware : mt6735
Baseband : SIXTH.CBP.MD.MP2.TC7.SP.V1_P22, 2015/9/23 15:41
SIM Card : ABSENT,ABSENT
CPU : arm64-v8a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:09
[Module Ver. 3.6]
Log Saved to Logs\170429_201456.log


:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

[SLSUTHAR]

REDMI MI 4I MI ACCOUNT REMOVE SUCCESSFULY WITH U.M.T