Successful test report by dereje staring U.M.T. [SUCCESS REPORTS]

[dereje]

SM-J327T1 7.0 frp unlock done via

ultimate frp tool

[dereje]

SM-J200F frp done ultimate frp tool

Brand : Samsung
Model : J200F
Operation : Reset FRP
Searching for Phone...Found
Port: : COM251 : SAMSUNG Mobile USB Modem #43
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J200F
IMEI: :00000000
Software: : J200FXXU1AOJ3/J200FOJV1AOJ4/J200FXXU1AOJ2/J200FXXU1AOJ3
Product : SM-J200FZWDKSA
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM11 : SAMSUNG Mobile USB Modem
Reading Data from Phone...Done
Chipset : LSI3475 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.

[dereje]

Xiaomi Redmi 5 Plus MIUI9 Reset Mi Account done

Device : Xiaomi Redmi 5 Plus
Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM165)
Driver Info : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 Plus [msm8953]
Software : ZQL1711-vince-build-20180322161322, V9.5.3.0.NEGMIFA [Thu Mar 22 16:13:20 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-03-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 2.9

Device : Xiaomi Redmi 5 Plus
Operation : Disable Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM165)
Driver Info : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 Plus [msm8953]
Software : ZQL1711-vince-build-20180322161322, V9.5.3.0.NEGMIFA [Thu Mar 22 16:13:20 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-03-01
Reading Data...
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
QcFire Ver. 2.9

[dereje]

world first Oppo F3 Plus CPH1613 latest sec pach root done





Operation : Root Device
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM710)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009900 [8976] 00000000
OPK_DATA : 6B62B769692C0CBE97447336C29B772808C304CE406B5BFA85 40E962333CAFDD
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8976_008]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8976, eMMC, 64 GB
LU Count : 1 [0x0747C000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO CPH1611 [msm8952]
Software : CPH1611EX_11_A.18_180413, eng.root.20180413.004413 [Fri Apr 13 00:47:23 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-03-05
Reading Data from Device...Done
Saving Backup...Done
Backup : C:\UMTool\QcFire\Read\OPPO_CPH1611_CPH1611EX_11_A. 18_180413_2018-03-05_190118_024950\boot_org.qri
Preparing Data...Done
Injecting Root Script...Done
Patching Kernel...Done
Repacking Image...Done
Saving Root Image...Done
Root Image : C:\UMTool\QcFire\Read\OPPO_CPH1611_CPH1611EX_11_A. 18_180413_2018-03-05_190118_024950\boot.qri
Writing Root Image...Done
If phone hang on logo, or boot loop, just write boot_org.qri using [Flash QRI]
Operation Finished.
QcFire Ver. 3.6