Successful test report by dereje staring U.M.T. [SUCCESS REPORTS] - Page 4 - GSM-Forum

khalidahmed · 05-10-2017, 10:55

Quote:

Originally Posted by dereje

Samsung J700F frp unlock 2016 done
Apply FRP Patch
Device: SM-J700F
Operation: Apply FRP Patch
Port: COM19 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7580 [HiSpeed]
Applying Patch Data... . . . . . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Please install driver once SAMSUNG_Android Device is detected.
Once ADB Drivers are installed, use Reset FRP button.
Elapsed Time: 00:19
[Ultimate Samsung Flasher v0.7]

Reset FRP via adb

Device: SM-J700F
Operation: Reset FRP
Searching for Device... Found
Model: SM-J700F
Baseband: J700FXXU2APC2
Bootloader: J700FXXU2APE1
PDA: J700FXXS2APE1
Android Version: 5.1.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Tap Next > Next > Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:11
[Ultimate Samsung Flasher v0.7]

note :-if thouch problem exists write full firmware

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

how to write UFT file samsumg frp system.
please tell how to select UFT file in umt samsung frp adv system

nahidroman · 05-16-2017, 13:40

Oppo f1f xxx flash fail umt done

Quote:

operation : Flash
checking for existing devices... Found
port : Com58
opening port... Ok
init handshake sequence... Ok
hardware id : E1b09000 [8936] 00000000
initializing protocol... Ok
using auto selection
preparing firehose loader... Done
sending loader [8936.ufl]... Done
executing loader... Ok
hardware : 8936, emmc, 16 gb
payload info : In: 262144 [4096], out: 16384, sector size: 512
writing [non-hlos.bin] -> [modem] ... Done
writing [ddr.img] -> [ddr] ... Done
writing [sec.dat] -> [sec] ... Done
writing [sbl1.mbn] -> [sbl1] ... Done
writing [sbl1.mbn] -> [sbl1bak] ... Done
writing [emmc_appsboot.mbn] -> [aboot] ... Done
writing [emmc_appsboot.mbn] -> [abootbak] ... Done
writing [rpm.mbn] -> [rpm] ... Done
writing [rpm.mbn] -> [rpmbak] ... Done
writing [tz.mbn] -> [tz] ... Done
writing [tz.mbn] -> [tzbak] ... Done
writing [hyp.mbn] -> [hyp] ... Done
writing [hyp.mbn] -> [hypbak] ... Done
[protective_flash] skipping [dynamic_nvbk.bin] -> [oppodycnvbk]
[protective_flash] skipping [static_nvbk.bin] -> [oppostanvbk]
writing [logo.bin] -> [logo] ... Done
writing [boot.img] -> [boot] ... Done
writing [recovery.img] -> [recovery] ... Done
writing [system.img] -> [system]... Done
writing [cache.img] -> [cache]... Done
writing [persist.img] -> [persist]... Done
writing [driver.iso] -> [driver] ... Done
writing [userdata.img] -> [userdata]... Done
writing [gpt_main0_partition_msm_15309.xml.bin] -> [primarygpt] ... Done
writing [gpt_backup0.bin] -> [backupgpt] ... Done
applying patches... . . . . . . . . . . . . . Done
resetting device... Done
operation finished.
Module ver. 0.9

thanks umt team

dereje · 06-08-2017, 15:03

Device: SM-J710F
Operation: Apply FRP Patch
Port: COM8 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Applying Patch Data... . . . . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Please install driver once SAMSUNG_Android Device is detected.
Once ADB Drivers are installed, use Reset FRP button.
Elapsed Time: 00:25
[Ultimate Samsung Flasher v1.1]

Device: SM-J710F
Operation: Reset FRP
Searching for Device... Found
Model:
Baseband: J710FXXU1APH4
Bootloader: J710FXXU1APG1
PDA: J710FXXU1APLM
Android Version: 6.0.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Tap Next > Next > Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:09
[Ultimate Samsung Flasher v1.1]

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

dereje · 06-21-2017, 17:56

Redmi Note 4 mt6797 Mi Account Disable done via umt

Port : ADB Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Mi Account Disable (ADB)
Searching for Device... Found
Model : Redmi Note 4
Version : 6.0
Hardware : mt6797
Baseband : Unknown
Basedband Not Found!
Try Read Info Again After Boot Finished!
Possibly Device May Not Have SIM Function!
SIM Card : NOT_READY,NOT_READY
CPU : arm64-v8a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Disabling Mi Account... . . . . . . . . Done
Operation Finished.
Elapsed Time: 00:09
[Module Ver. 3.9]
Log Saved to Logs\170621_193038.log

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

dereje · 06-24-2017, 10:23

SM-J106H 6.0.1 new sec frp unlock done

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM69 : SAMSUNG Mobile USB Modem #20
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

dereje · 07-11-2017, 07:22

LG G4 LGH812 6.0 frp unlock done
:: NO FAKE BLA BLA BLA ::
only via umt but fact is

all dedicated tools failed

Operation : FRP Reset (Universal)
Opening Port... OK
Reading Phone Information... .. OK
Model : LG-H812
SW Ver. : LGH812AT-00-V20x-302-720-JUL-12-2016+0
And. Ver. : 6.0
IMEI : 359803065093308
Prd. ID : PT01S151215000033
HW Ver. : rev_10
LAF Ver. : 1.1
Reading Partition Data... OK
Erasing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:11
[Module Ver. 3.8]

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

dereje · 07-12-2017, 17:06

A510FD reset frp simple with new method

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM69 : SAMSUNG Mobile USB Modem #20
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7580 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:15
[Ultimate Samsung Flasher v1.1]

dereje · 07-17-2017, 15:48

world first J710F new security 2017 frp done perfectly only via umt

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

dereje · 07-18-2017, 11:56

world first G570F 6.0.1 new security 2017 frp done perfectly only via umt

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

dereje · 07-20-2017, 18:48

world 1st ASUS_X013D 5.1.1 feb 1,2017 security patch frp done only via umt

first enable adb with any trick then unlock with moto method via umt

Port : ADB Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Motorola FRP Reset
Searching for Device... Found
Model : ASUS_X013D
Version : 5.1.1
Hardware : qcom
Baseband : M3.0.34-ZB551KL_201045
SIM Card : READY,ABSENT
CPU : armeabi-v7a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:10
[Module Ver. 3.8]
Log Saved to Logs\170720_102824.log

:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::

sahed07860 · 07-26-2017, 07:00

Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Found
Model : Moto G (5) Plus
Version : 7.0
Hardware : qcom
Baseband : M8953_02.03.07.06R POTTER_NA_CUST
SIM Card : READY
CPU : armeabi-v7a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:06
[Module Ver. 4.0]
Log Saved to Logs\170726_115149.log

sahed07860 · 07-26-2017, 07:11

Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Found
Model : Moto G (5) Plus
Version : 7.0
Hardware : qcom
Baseband : M8953_02.03.07.06R POTTER_NA_CUST
SIM Card : READY
CPU : armeabi-v7a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:06
[Module Ver. 4.0]
Log Saved to Logs\170726_115149.log

http://i65.tinypic.com/2wfl7cl.jpg

r4raja007 · 08-02-2017, 05:28

LYF 4503 flashing done by umt

[/IMG]

Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM25)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Firehose Loader...Done
Sending Loader [8909_012.ufl]...Done
Executing Loader...OK
Hardware : 8909, eMMC, 8 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
[PROTECTIVE_FLASH] Skipping [zero.bin] -> [modemst1]
[PROTECTIVE_FLASH] Skipping [zero.bin] -> [modemst2]
Writing [splash.img] -> [splash] ...Done
[PROTECTIVE_FLASH] Skipping [fsg_rlc01a.img] -> [fsg]
Writing [sec.dat] -> [sec] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [system_31.img] -> [system] ...Done
Writing [system_32.img] -> [system] ...Done
Writing [system_33.img] -> [system] ...Done
Writing [system_34.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [userdata_22.img] -> [userdata] ...Done
Writing [userdata_23.img] -> [userdata] ...Done
Writing [userdata_24.img] -> [userdata] ...Done
Writing [userdata_25.img] -> [userdata] ...Done
Writing [userdata_26.img] -> [userdata] ...Done
Writing [userdata_27.img] -> [userdata] ...Done
Writing [userdata_28.img] -> [userdata] ...Done
Writing [userdata_29.img] -> [userdata] ...Done
Writing [userdata_30.img] -> [userdata] ...Done
Writing [userdata_31.img] -> [userdata] ...Done
Writing [userdata_32.img] -> [userdata] ...Done
Writing [userdata_33.img] -> [userdata] ...Done
Writing [userdata_34.img] -> [userdata] ...Done
Writing [userdata_35.img] -> [userdata] ...Done
Writing [userdata_36.img] -> [userdata] ...Done
Writing [userdata_37.img] -> [userdata] ...Done
Writing [userdata_38.img] -> [userdata] ...Done
Writing [userdata_39.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
Module Ver. 1.0

r4raja007 · 08-02-2017, 07:38

samsung j210f frp reset

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM41 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:16
[Ultimate Samsung Flasher v1.2]Imgur: The most awesome images on the Internet

r4raja007 · 08-02-2017, 11:56

samsung g600fy frp done umt
Imgur: The most awesome images on the Internet
Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM29 : SAMSUNG Mobile USB Modem #3
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:19
[Ultimate Samsung Flasher v1.2]

06-08-2017, 15:03	#48 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	SM-J710F frp unlocked easy by umt Device: SM-J710F Operation: Apply FRP Patch Port: COM8 : SAMSUNG Mobile USB Modem Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: LSI7870 [HiSpeed] Applying Patch Data... . . . . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Please install driver once SAMSUNG_Android Device is detected. Once ADB Drivers are installed, use Reset FRP button. Elapsed Time: 00:25 [Ultimate Samsung Flasher v1.1] Device: SM-J710F Operation: Reset FRP Searching for Device... Found Model: Baseband: J710FXXU1APH4 Bootloader: J710FXXU1APG1 PDA: J710FXXU1APLM Android Version: 6.0.1 Resetting FRP Lock... Done ---------------- IMPORTANT ---------------- Tap Next > Next > Accept Agreement on phone to enter Home Screen. Goto Menu > Settings > Backup and Reset > Factory data reset. Operation Finished. Elapsed Time: 00:09 [Ultimate Samsung Flasher v1.1] :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

06-21-2017, 17:56	#49 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	Redmi Note 4 mt6797 Mi Account Disable done via umt Redmi Note 4 mt6797 Mi Account Disable done via umt Port : ADB Interface Baud Rate : Not Applicable Device : Generic Operation : Mi Account Disable (ADB) Searching for Device... Found Model : Redmi Note 4 Version : 6.0 Hardware : mt6797 Baseband : Unknown Basedband Not Found! Try Read Info Again After Boot Finished! Possibly Device May Not Have SIM Function! SIM Card : NOT_READY,NOT_READY CPU : arm64-v8a Type : Unknown MEID(1) : Null/Empty Root : Not Rooted Disabling Mi Account... . . . . . . . . Done Operation Finished. Elapsed Time: 00:09 [Module Ver. 3.9] Log Saved to Logs\170621_193038.log :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

06-24-2017, 10:23	#50 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	SM-J106H 6.0.1 new sec frp unlock done SM-J106H 6.0.1 new sec frp unlock done Device: Samsung Device Operation: Reset FRP (New Method) Port: COM69 : SAMSUNG Mobile USB Modem #20 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: SPRD8735 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

07-11-2017, 07:22	#51 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	LG G4 LGH812 6.0 frp unlock done only via umt LG G4 LGH812 6.0 frp unlock done :: NO FAKE BLA BLA BLA :: only via umt but fact is all dedicated tools failed Operation : FRP Reset (Universal) Opening Port... OK Reading Phone Information... .. OK Model : LG-H812 SW Ver. : LGH812AT-00-V20x-302-720-JUL-12-2016+0 And. Ver. : 6.0 IMEI : 359803065093308 Prd. ID : PT01S151215000033 HW Ver. : rev_10 LAF Ver. : 1.1 Reading Partition Data... OK Erasing FRP Lock... Done Operation Finished. Elapsed Time: 00:11 [Module Ver. 3.8] :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

07-12-2017, 17:06	#52 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	A510FD reset frp simple with new method A510FD reset frp simple with new method Device: Samsung Device Operation: Reset FRP (New Method) Port: COM69 : SAMSUNG Mobile USB Modem #20 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: LSI7580 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 00:15 [Ultimate Samsung Flasher v1.1]

07-17-2017, 15:48	#53 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	J710F new security 2017 frp done perfectly only via umt world first J710F new security 2017 frp done perfectly only via umt :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

07-18-2017, 11:56	#54 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	world first G570F new security 2017 frp done perfectly only via umt world first G570F 6.0.1 new security 2017 frp done perfectly only via umt :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

07-20-2017, 18:48	#55 (permalink)
dereje No Life Poster Join Date: Feb 2007 Location: Ethiopia Posts: 1,518 Member: 449991 Status: Offline Thanks Meter: 933	world 1st ASUS_X013D 5.1.1 feb 1,2017 security patch frp done world 1st ASUS_X013D 5.1.1 feb 1,2017 security patch frp done only via umt first enable adb with any trick then unlock with moto method via umt Port : ADB Interface Baud Rate : Not Applicable Device : Generic Operation : Motorola FRP Reset Searching for Device... Found Model : ASUS_X013D Version : 5.1.1 Hardware : qcom Baseband : M3.0.34-ZB551KL_201045 SIM Card : READY,ABSENT CPU : armeabi-v7a Type : Unknown MEID(1) : Null/Empty Root : Not Rooted Resetting FRP Lock... Done Operation Finished. Elapsed Time: 00:10 [Module Ver. 3.8] Log Saved to Logs\170720_102824.log :: NO FAKE ADVERTISEMENT :: :: NO FAKE UPDATES :: :: NO FAKE WORLD'S FIRST :: :: NO FAKE BLA BLA BLA ::

07-26-2017, 07:00	#56 (permalink)
sahed07860 Freak Poster Join Date: Dec 2007 Location: bangladesh, chittagong Posts: 369 Member: 648453 Status: Offline Thanks Meter: 82	Moto G (5) Plus frp done Port : ADB Interface Baud Rate : Not Applicable Device : Motorola Operation : Reset FRP Searching for Device... Found Model : Moto G (5) Plus Version : 7.0 Hardware : qcom Baseband : M8953_02.03.07.06R POTTER_NA_CUST SIM Card : READY CPU : armeabi-v7a Type : Unknown MEID(1) : Null/Empty Root : Not Rooted Resetting FRP Lock... Done Operation Finished. Elapsed Time: 00:06 [Module Ver. 4.0] Log Saved to Logs\170726_115149.log

07-26-2017, 07:11	#57 (permalink)
sahed07860 Freak Poster Join Date: Dec 2007 Location: bangladesh, chittagong Posts: 369 Member: 648453 Status: Offline Thanks Meter: 82	Moto G (5) Plus frp done 100% Port : ADB Interface Baud Rate : Not Applicable Device : Motorola Operation : Reset FRP Searching for Device... Found Model : Moto G (5) Plus Version : 7.0 Hardware : qcom Baseband : M8953_02.03.07.06R POTTER_NA_CUST SIM Card : READY CPU : armeabi-v7a Type : Unknown MEID(1) : Null/Empty Root : Not Rooted Resetting FRP Lock... Done Operation Finished. Elapsed Time: 00:06 [Module Ver. 4.0] Log Saved to Logs\170726_115149.log http://i65.tinypic.com/2wfl7cl.jpg

08-02-2017, 05:28	#58 (permalink)
r4raja007 Freak Poster Join Date: Jan 2011 Location: haryana in fatehabad Age: 36 Posts: 167 Member: 1503356 Status: Offline Thanks Meter: 110	LYF 4503 flashing done by umt LYF 4503 flashing done by umt [/IMG] Operation : Flash Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM25) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1009600 [8909] 00000000 OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E Initializing Protocol...OK Using Auto Loader Selection [2] Preparing Firehose Loader...Done Sending Loader [8909_012.ufl]...Done Executing Loader...OK Hardware : 8909, eMMC, 8 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Writing [NON-HLOS.bin] -> [modem] ...Done Writing [sbl1.mbn] -> [sbl1] ...Done Writing [sbl1.mbn] -> [sbl1bak] ...Done Writing [emmc_appsboot.mbn] -> [aboot] ...Done Writing [emmc_appsboot.mbn] -> [abootbak] ...Done Writing [rpm.mbn] -> [rpm] ...Done Writing [rpm.mbn] -> [rpmbak] ...Done Writing [tz.mbn] -> [tz] ...Done Writing [tz.mbn] -> [tzbak] ...Done [PROTECTIVE_FLASH] Skipping [zero.bin] -> [modemst1] [PROTECTIVE_FLASH] Skipping [zero.bin] -> [modemst2] Writing [splash.img] -> [splash] ...Done [PROTECTIVE_FLASH] Skipping [fsg_rlc01a.img] -> [fsg] Writing [sec.dat] -> [sec] ...Done Writing [boot.img] -> [boot] ...Done Writing [system_1.img] -> [system] ...Done Writing [system_2.img] -> [system] ...Done Writing [system_3.img] -> [system] ...Done Writing [system_4.img] -> [system] ...Done Writing [system_5.img] -> [system] ...Done Writing [system_6.img] -> [system] ...Done Writing [system_7.img] -> [system] ...Done Writing [system_8.img] -> [system] ...Done Writing [system_9.img] -> [system] ...Done Writing [system_10.img] -> [system] ...Done Writing [system_11.img] -> [system] ...Done Writing [system_12.img] -> [system] ...Done Writing [system_13.img] -> [system] ...Done Writing [system_14.img] -> [system] ...Done Writing [system_15.img] -> [system] ...Done Writing [system_16.img] -> [system] ...Done Writing [system_17.img] -> [system] ...Done Writing [system_18.img] -> [system] ...Done Writing [system_19.img] -> [system] ...Done Writing [system_20.img] -> [system] ...Done Writing [system_21.img] -> [system] ...Done Writing [system_22.img] -> [system] ...Done Writing [system_23.img] -> [system] ...Done Writing [system_24.img] -> [system] ...Done Writing [system_25.img] -> [system] ...Done Writing [system_26.img] -> [system] ...Done Writing [system_27.img] -> [system] ...Done Writing [system_28.img] -> [system] ...Done Writing [system_29.img] -> [system] ...Done Writing [system_30.img] -> [system] ...Done Writing [system_31.img] -> [system] ...Done Writing [system_32.img] -> [system] ...Done Writing [system_33.img] -> [system] ...Done Writing [system_34.img] -> [system] ...Done Writing [persist_1.img] -> [persist] ...Done Writing [cache_1.img] -> [cache] ...Done Writing [cache_2.img] -> [cache] ...Done Writing [cache_3.img] -> [cache] ...Done Writing [recovery.img] -> [recovery] ...Done Writing [userdata_1.img] -> [userdata] ...Done Writing [userdata_2.img] -> [userdata] ...Done Writing [userdata_3.img] -> [userdata] ...Done Writing [userdata_4.img] -> [userdata] ...Done Writing [userdata_5.img] -> [userdata] ...Done Writing [userdata_6.img] -> [userdata] ...Done Writing [userdata_7.img] -> [userdata] ...Done Writing [userdata_8.img] -> [userdata] ...Done Writing [userdata_9.img] -> [userdata] ...Done Writing [userdata_10.img] -> [userdata] ...Done Writing [userdata_11.img] -> [userdata] ...Done Writing [userdata_12.img] -> [userdata] ...Done Writing [userdata_13.img] -> [userdata] ...Done Writing [userdata_14.img] -> [userdata] ...Done Writing [userdata_15.img] -> [userdata] ...Done Writing [userdata_16.img] -> [userdata] ...Done Writing [userdata_17.img] -> [userdata] ...Done Writing [userdata_18.img] -> [userdata] ...Done Writing [userdata_19.img] -> [userdata] ...Done Writing [userdata_20.img] -> [userdata] ...Done Writing [userdata_21.img] -> [userdata] ...Done Writing [userdata_22.img] -> [userdata] ...Done Writing [userdata_23.img] -> [userdata] ...Done Writing [userdata_24.img] -> [userdata] ...Done Writing [userdata_25.img] -> [userdata] ...Done Writing [userdata_26.img] -> [userdata] ...Done Writing [userdata_27.img] -> [userdata] ...Done Writing [userdata_28.img] -> [userdata] ...Done Writing [userdata_29.img] -> [userdata] ...Done Writing [userdata_30.img] -> [userdata] ...Done Writing [userdata_31.img] -> [userdata] ...Done Writing [userdata_32.img] -> [userdata] ...Done Writing [userdata_33.img] -> [userdata] ...Done Writing [userdata_34.img] -> [userdata] ...Done Writing [userdata_35.img] -> [userdata] ...Done Writing [userdata_36.img] -> [userdata] ...Done Writing [userdata_37.img] -> [userdata] ...Done Writing [userdata_38.img] -> [userdata] ...Done Writing [userdata_39.img] -> [userdata] ...Done Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done Writing [gpt_backup0.bin] -> [BackupGPT] ...Done Applying Patches................Done Resetting device...Done Operation Finished. Module Ver. 1.0

08-02-2017, 07:38	#59 (permalink)
r4raja007 Freak Poster Join Date: Jan 2011 Location: haryana in fatehabad Age: 36 Posts: 167 Member: 1503356 Status: Offline Thanks Meter: 110	samsung j210f frp reset Device: Samsung Device Operation: Reset FRP (New Method) Port: COM41 : SAMSUNG Mobile USB Modem #2 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: SPRD8735 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 00:16 [Ultimate Samsung Flasher v1.2]Imgur: The most awesome images on the Internet

08-02-2017, 11:56	#60 (permalink)
r4raja007 Freak Poster Join Date: Jan 2011 Location: haryana in fatehabad Age: 36 Posts: 167 Member: 1503356 Status: Offline Thanks Meter: 110	samsung g600fy frp done umt Imgur: The most awesome images on the Internet Device: Samsung Device Operation: Reset FRP (New Method) Port: COM29 : SAMSUNG Mobile USB Modem #3 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: MSM8916 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 00:19 [Ultimate Samsung Flasher v1.2]