[blang]

Originally Posted by Repair4u

how to do this cant understand???


Just change correct rom2/rpmb size if needed
Make emmc bootable (set boot config 0x48, boot bus config 0x1)
Write rom1 and rom2 partition and phone are ready for odin flashing


i have got this problem after repair emmc 0000 to vtu00m
smart report normal, but cant write rom2

Z3X EasyJtag Software ver. 1.5.1.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 16160A05CEC1AAB2, ,FW Ver.: 01.50
CMD Pullup Level:1320 mV
CMD Active Level:1773 mV
eMMC Device Information
EMMC CID : 15010056545530304DF1AD191F706F30
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 06/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 2904104816
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_2904104816_20140405_1717.extcsd
Done.
Writing file...D:\z3x jtag repair files\I9300\EMMC_ROM2_00000000_00200000.bin

Z3X EasyJtag Software ver. 1.5.1.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1320 mV
CMD Active Level:1773 mV
Writing 000000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Access to current partition forbidden ( size=0 )
Done !!!

emmc is bad.
you can try repair . but Emmc can dead fully.