@dazexy
It works on ALL Kinds of ATF BOXES
ATF BIG Normal PCB
ATF BIG Modified PCB
ATF Lightning
ATF Nitro
See here it is connected to my ATF BIG BOX
PINOUT USED for Dolphin Clip:
If you get connection problems, try this:
1. Make sure your pinout is 100001% correct
2. Disconnect ATF Box from USB Port
3. Reconnect ATF Box to USB Port
4. Click "Scan SPI"
Repeat 1 to 4 is better than just repeat clicking "Scan SPI"
This is because sometimes SPI chip is not initialized properly,