| Welcome to Octoplus/Octopus Box Samsung software version 1.7.4
-----------------------------------------------------------------------------------
To connect GT-I9301I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: I9301IXXUANC6_I9301IITVAND2_I9301IXXUANC6_HOME.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9301I into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9301I
Detected phone model: GT-I9301I
Firmware compiled date: Sat Mar 22 04:16:57 KST 2014
PDA version: I9301IXXUANC6
CSC version: I9301IITVAND2
SW version: I9301IXXUANC6
Phone IMEI: Unknown
Phone SN: RV1F83MSQ8B
Android version: 4.4.2 (KOT49H)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP\Security-GT-I9301I-14-11-2014_16-11-02-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
4. Note: phone screen must be active
Connecting to phone, please wait...
IMEI successfully repaired.
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9301I
Port is busy
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9301I
Port is busy
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9301I
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM154
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Incorrect IMEI
SW version: M8626A-AAAANAZM-1.0.4044
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM154
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Incorrect IMEI
SW version: M8626A-AAAANAZM-1.0.4044
Repairing 3G/4G...
Reading nv...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP\NV-GT-I9301I-004400152020000-14-11-2014_16-17-57-.nv file
3G/4G repair successfully
To finish the operation, please restart the phone via phone's menu (don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM154
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 03 2014
Firmware compiled time: 12:00:00
Firmware released date: Mar 20 2014
Firmware released time: 00:54:10
Incorrect IMEI
SW version: M8626A-AAAANAZM-1.0.4044
Creating NVM backup
Reading NVM done!
Writing NVM...
NVM writing completed successfully
Please, restart the phone to apply changes |