I have 3 different Nokia 225 and all cant upload job and even read flash
seems BEST dont work correctly with new loaders
BEST v 1.98
try to upload job:
phone powered off
Code:
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 125 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : CCEF6B85234FE6268915DE0DCE95C96A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : AA
DA_JUMP : 00AAAAAA
DA_INFO : 0xAA , Ver : 170.170 , BBID : 0xAA
DA_CSTAT : 0xAA
SOC Verify failed!
Error Code : 0x00
Connect phone on selected interface...
phone powered on
Code:
Software Info: 20.10.11 00-00-00 RM-1012
IMEI: 3523950xxxxxxxx
PPM version : EI
Product code: 059W329
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 125 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : CCEF6B85234FE6268915DE0DCE95C96A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : PEARL.20.10.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Pearl.fg
DA_VERIFY : AA
DA_JUMP : 00AAAAAA
DA_INFO : 0xAA , Ver : 170.170 , BBID : 0xAA
DA_CSTAT : 0xAA
SOC Verify failed!
Error Code : 0x00
Connect phone on selected interface...
when expect on full support?