2600 Flashing problem i've searched around but can't find exact solution.
Check this:- 1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia
Algorithm Ok, MSID: 84A50DA69ACD4831F94D3A4354
Decoded MSID: 3E4EBAE9-009AB4CE-A8000000
Encoded FAID: A45D7DD5-280443A9-69C9295B
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013EFFFF Erased, Time: 00:33
MCU Flashing Completed, Time: 00:09
Area1: 0x01190000-0x0119FFFF Erased, Time: 00:00
Area2: 0x011A0000-0x0136FFFF Erased, Time: 00:15
CNT Flashing Completed, Time: 00:05
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile
i can't write pm always says:-
Init Local Mode Failed
Write PM Failed
Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!
UI Settings always failed too
when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.
Is it s/w or h/w problem?
Please help... what should i do? |