2600 Flashing problem - GSM-Forum

beleuh · 06-19-2005, 21:59

i've searched around but can't find exact solution.

Check this:-

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia
Algorithm Ok, MSID: 84A50DA69ACD4831F94D3A4354
Decoded MSID: 3E4EBAE9-009AB4CE-A8000000
Encoded FAID: A45D7DD5-280443A9-69C9295B
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013EFFFF Erased, Time: 00:33
MCU Flashing Completed, Time: 00:09
Area1: 0x01190000-0x0119FFFF Erased, Time: 00:00
Area2: 0x011A0000-0x0136FFFF Erased, Time: 00:15
CNT Flashing Completed, Time: 00:05
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

i can't write pm always says:-
Init Local Mode Failed
Write PM Failed

Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!

UI Settings always failed too

when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.

Is it s/w or h/w problem?

Please help... what should i do?

ftl's recovery · 06-20-2005, 05:33

same problem with mine. any help plz. tnx a lot

ANoNYMoUS_1 · 06-20-2005, 06:18

FLASH IC is damage.. its better to replace.!

Nonoyxp · 06-20-2005, 06:48

hi just re heat flash ic then fullflash will work,regards

ANoNYMoUS_1 · 06-20-2005, 06:52

or try to flash in another flasher....!

lrpa · 06-21-2005, 07:29

Have the same problem the phone's working but shutdown after sometime say 1 minute or so and i flash it with tornado the pone's dead now with the exact problem i dont think its a hw.can anyone help

beleuh · 06-21-2005, 20:17

Thanks for all ur help.
I've changed Flash IC and re-heated Flash IC but still same problem... Init Local Mode Failed.

Need some help

lrpa · 06-22-2005, 11:57

Is the flash IC same or can i use 1100 flash IC

erkan06us · 05-04-2006, 09:08

same problem here.phone was working before full erase.i tried different pm.now not enter local mode/test mode/simlock...nobody doesnt help me.i couldnt find a method for solve my problem.

erkan06us · 05-04-2006, 09:14

Quote:

Originally Posted by beleuh

i've searched around but can't find exact solution.

Check this:-

1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u_st_i.fia
Algorithm Ok, MSID: 84A50DA69ACD4831F94D3A4354
Decoded MSID: 3E4EBAE9-009AB4CE-A8000000
Encoded FAID: A45D7DD5-280443A9-69C9295B
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x013EFFFF Erased, Time: 00:33
MCU Flashing Completed, Time: 00:09
Area1: 0x01190000-0x0119FFFF Erased, Time: 00:00
Area2: 0x011A0000-0x0136FFFF Erased, Time: 00:15
CNT Flashing Completed, Time: 00:05
Extracting Contents Package ...
Init Local Mode Failed
Contents Package Extracting Failed:
Process Failed, Repowering Mobile

i can't write pm always says:-
Init Local Mode Failed
Write PM Failed

Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!

UI Settings always failed too

when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.

Is it s/w or h/w problem?

Please help... what should i do?

if you solve the problem,tell me the method pls.thanks.

steva · 05-04-2006, 09:17

check this
http://forum.gsmhosting.com/vbb/sear...archid=7930402

regards

erkan06us · 05-04-2006, 10:42

i solved the problem.thanks.
http:///vbb/showth...16#post1730116

gokul2005 · 05-04-2006, 17:38

Quote:

i solved the problem.thanks.
http:///vbb/showth...16#post1730116

thanks for this link........ problem solved

chandra sekharj · 02-11-2008, 17:31

i can't write pm always says:-
Init Local Mode Failed
Write PM Failed

Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!!

UI Settings always failed too

when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.

06-19-2005, 21:59	#1 (permalink)
beleuh Freak Poster Join Date: May 2005 Age: 53 Posts: 196 Member: 143281 Status: Offline Thanks Meter: 17	2600 Flashing problem i've searched around but can't find exact solution. Check this:- 1st Boot Ok, DCT4, UPP: 1201 Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032 Algorithm: u_st_i.fia Algorithm Ok, MSID: 84A50DA69ACD4831F94D3A4354 Decoded MSID: 3E4EBAE9-009AB4CE-A8000000 Encoded FAID: A45D7DD5-280443A9-69C9295B Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00 Area2: 0x01010000-0x013EFFFF Erased, Time: 00:33 MCU Flashing Completed, Time: 00:09 Area1: 0x01190000-0x0119FFFF Erased, Time: 00:00 Area2: 0x011A0000-0x0136FFFF Erased, Time: 00:15 CNT Flashing Completed, Time: 00:05 Extracting Contents Package ... Init Local Mode Failed Contents Package Extracting Failed: Process Failed, Repowering Mobile i can't write pm always says:- Init Local Mode Failed Write PM Failed Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!! UI Settings always failed too when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too. Is it s/w or h/w problem? Please help... what should i do?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2600 flashing problem	jmustufa	Nokia Digital Core Technology 4 ( DCT-4 )	0	03-23-2007 12:07
2600 flashing problem	sanjeewa57	UFS2 + UFS3-Tornadoflasher	3	09-14-2006 01:50
2600 Flashing Problem	RAHUL_CELLCARE	Nokia Hardware & Hardware Repair	1	05-26-2006 18:44
2600 flash problem	emso	UFS2 + UFS3-Tornadoflasher	1	10-01-2005 00:34
nokia 2600 flash problem	visanlg	Nokia Digital Core Technology 4 ( DCT-4 )	0	02-09-2005 18:25

06-20-2005, 05:33	#2 (permalink)
ftl's recovery Insane Poster Join Date: Jan 2005 Posts: 77 Member: 109794 Status: Offline Thanks Meter: 1	same problem with mine. any help plz. tnx a lot

06-20-2005, 06:18	#3 (permalink)
ANoNYMoUS_1 Freak Poster Join Date: Jun 2005 Age: 41 Posts: 282 Member: 153299 Status: Offline Thanks Meter: 59	FLASH IC is damage.. its better to replace.!

06-20-2005, 06:48	#4 (permalink)
Nonoyxp No Life Poster Join Date: Apr 2005 Location: X-Sim Philippines Posts: 3,591 Member: 141973 Status: Offline Sonork: 100.1579084 Thanks Meter: 4,002	hi just re heat flash ic then fullflash will work,regards

06-20-2005, 06:52	#5 (permalink)
ANoNYMoUS_1 Freak Poster Join Date: Jun 2005 Age: 41 Posts: 282 Member: 153299 Status: Offline Thanks Meter: 59	or try to flash in another flasher....!

06-21-2005, 07:29	#6 (permalink)
lrpa Freak Poster Join Date: Feb 2005 Age: 49 Posts: 217 Member: 118395 Status: Offline Thanks Meter: 25	Have the same problem the phone's working but shutdown after sometime say 1 minute or so and i flash it with tornado the pone's dead now with the exact problem i dont think its a hw.can anyone help

06-21-2005, 20:17	#7 (permalink)
beleuh Freak Poster Join Date: May 2005 Age: 53 Posts: 196 Member: 143281 Status: Offline Thanks Meter: 17	Thanks for all ur help. I've changed Flash IC and re-heated Flash IC but still same problem... Init Local Mode Failed. Need some help

06-22-2005, 11:57	#8 (permalink)
lrpa Freak Poster Join Date: Feb 2005 Age: 49 Posts: 217 Member: 118395 Status: Offline Thanks Meter: 25	Is the flash IC same or can i use 1100 flash IC

05-04-2006, 09:08	#9 (permalink)
erkan06us Freak Poster Join Date: Aug 2005 Location: turkey Age: 51 Posts: 211 Member: 174769 Status: Offline Thanks Meter: 19	same problem here.phone was working before full erase.i tried different pm.now not enter local mode/test mode/simlock...nobody doesnt help me.i couldnt find a method for solve my problem.

05-04-2006, 09:17	#11 (permalink)
steva No Life Poster Join Date: May 2001 Location: Lazarevac,SRBIJA Age: 48 Posts: 2,988 Member: 4772 Status: Offline Thanks Meter: 556	check this http://forum.gsmhosting.com/vbb/sear...archid=7930402 regards

05-04-2006, 10:42	#12 (permalink)
erkan06us Freak Poster Join Date: Aug 2005 Location: turkey Age: 51 Posts: 211 Member: 174769 Status: Offline Thanks Meter: 19	i solved the problem.thanks. http:///vbb/showth...16#post1730116

02-11-2008, 17:31	#14 (permalink)
chandra sekharj Junior Member Join Date: Jan 2008 Posts: 14 Member: 692253 Status: Offline Thanks Meter: 0	i can't write pm always says:- Init Local Mode Failed Write PM Failed Nothing display on the LCD, no Local Mode, no Test Mode, no Contact Service....... nothing, just nothing!!! UI Settings always failed too when i put the battery and try to switch on the phone, only the four LED lights on keypad blinking, shortly the LCD blink too.