hi
i did change emmc of sam GT-I9192 several time successfully,but this time after change emmc device work correctly until sd card-Tflash (contain boot repair from sd card create by ATF 4.4.2) is into device . without Tflash won't turn on. also i did boot repair via jtag
log:
Quote:
Connecting to Target...
JTAG device: MSM8230AB.
CPU IDCODE : 0x4F1F0F0F Mfg.: 0x787, Part: 0xf1f0, Ver.: 0x4
CPU Manufacturer: Samsung , CPU Name: ARM7GEN
JTAG device: MSM8230AB.
CPU IDCODE : 0x308A30E1 Mfg.: 0x070, Part: 0x08a3, Ver.: 0x3
CPU Manufacturer: QUALCOMM , CPU Name: MSM8230AB
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
EMMC Writing GPT, PIT, MD5...
eMMC Write OK! Elapsed time: 22.835306s (179.371 KiB/s)
EMMC Writing SBL1...
eMMC Write OK! Elapsed time: 1.339077s (95.588 KiB/s)
EMMC Writing SBL2...
eMMC Write OK! Elapsed time: 2.157123s (118.677 KiB/s)
EMMC Writing SBL3...
eMMC Write OK! Elapsed time: 4.889280s (104.719 KiB/s)
EMMC Writing ABOOT...
eMMC Write OK! Elapsed time: 17.316992s (118.265 KiB/s)
EMMC Writing RPM...
eMMC Write OK! Elapsed time: 3.813218s (134.270 KiB/s)
EMMC Writing TZ...
eMMC Write OK! Elapsed time: 4.159238s (123.099 KiB/s)
All Done.
|
i sure dump file and emmc is healthy