Hi,
Tested Piece with New update, But still its not working!!!
Code:
Operation : Flash
Checking for existing devices...Found
Port : COM63
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1909600 [8992] 06103100
OPK_DATA : E5310D58645CA1134142643F8D90BBAD32AE247D5E3188A1B88894F7C81D6F72
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Firehose Loader...Done
Sending Loader [8992_004.ufl]...Done
Executing Loader...Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
Module Ver. 1.0
Operation : Flash
Checking for existing devices...Found
Port : COM63
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1909600 [8992] 06103100
OPK_DATA : E5310D58645CA1134142643F8D90BBAD32AE247D5E3188A1B88894F7C81D6F72
Initializing Protocol...OK
Preparing Firehose Loader...Done
Sending Loader [8992_1.ufl]...Done
Executing Loader...Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
Module Ver. 1.0
Operation : Flash
Checking for existing devices...Found
Port : COM63
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1909600 [8992] 06103100
OPK_DATA : E5310D58645CA1134142643F8D90BBAD32AE247D5E3188A1B88894F7C81D6F72
Initializing Protocol...OK
Preparing Firehose Loader...Done
Sending Loader [8992_003.ufl]...Done
Executing Loader...Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
Module Ver. 1.0
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM63)
Driver Info : Lenovo Inc., leusbser.sys, 2.0.9.6
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1909600 [8992] 06103100
OPK_DATA : E5310D58645CA1134142643F8D90BBAD32AE247D5E3188A1B88894F7C81D6F72
Initializing Protocol...OK
Preparing Firehose Loader...Done
Sending Loader [8992_002.ufl]...Done
Executing Loader...Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
Module Ver. 1.0
Operation : Flash
Checking for existing devices...Found
Port : COM63
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1909600 [8992] 06103100
OPK_DATA : E5310D58645CA1134142643F8D90BBAD32AE247D5E3188A1B88894F7C81D6F72
Initializing Protocol...OK
Preparing Firehose Loader...Done
Sending Loader [8992_001.ufl]...Done
Executing Loader...Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
Module Ver. 1.0
Operation : Flash
Checking for existing devices...Found
Port : COM63
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1909600 [8992] 06103100
OPK_DATA : E5310D58645CA1134142643F8D90BBAD32AE247D5E3188A1B88894F7C81D6F72
Initializing Protocol...OK
Preparing Firehose Loader...Done
Sending Loader [8992.ufl]...Done
Executing Loader...Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
Module Ver. 1.0
LG V0.2 Flashing
Code:
Port : COM63 : Qualcomm HS-USB QDLoader 9008 (COM63)
Baud Rate : 115200 - Auto
Device : LG D820
Operation : Write Firmware
Opening Port...OK
Reading Information...Hello Failed!
Operation Failed.
Time taken: 00:03
[Module Ver. 0.2]
Log Saved to Logs\170724_163647.log
Kindly Check ...
BR