[jibonrex13]

Originally Posted by wincel

1. Install "MotoService 3.0.4
2. After installation, perform the following procedures:
The. Go to "C: \ Program Files (x86) \ Motorola \ MotoService" (default installation location)
3. Rename "Motoweb.dll" dll to Motoweb2.dll.
W Then go to "MotoService" for the first time and close.
4. Go to "C: \ ProgramData \ Motorola \ MotoService" and rename the file
"MotoServiceOptions.json" for MotoServiceOptions2.json.
Y. Then edit the MotoServiceOptions2.json file (right-click
Put it with the notebook).
5. Edit in line 13 the following name (":: offlinemode: false"), place
"Offlinemode": true, save as MotoServiceOptions.json, close and open
The program normally done this will free the side menus.
6. Turn the unit off and then on again in "FASTBOOT" mode (POWER +
VOLUME -), select "FACTORY MODE" and press Power.
computer
7. Open the "MotoService" program, go to "Options" - "Port Settings",
On the screen, the device will select the number you want to place.
Press "Assing" and "Done"
8. In the menu select "Power Test", this will be done on the device port will appear
Once again, "Tower Test" again press this option, after this a window will open and
Press "Yes"
9. Remove the appliance from the mains and turn it on again in FACTORY MODE and
The power button again connects to the computer, which
Enable USB debugging check the option and ok.
10. Open the Adb command prompt and perform the second procedure of the old devices
(G2, G3) by entering the following command.
11. adb devices
12. adb shell content insert --url content: // settings / secure --bind
First Name: s: user_setup_complete --bind value: s: 1
13. Turn the device off and on and unlock

Not working on june security. plz check