| Welcome to Octoplus Box Samsung software version 2.6.6
-----------------------------------------------------------------------------------
To connect SM-J500F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Press "Read Info" in software.
Selected firmware file: J500FXXU1AOG1_J500FOJV1AOG3_XSG_Android_5.1.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J500F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing QSEE section...
QSEE section has been written successfully.
Writing QHEE section...
QHEE section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing sec section...
sec section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J500F
Operation: Reset MSL
Reading info...
Phone was not found on the selected port!
Operation was failed! |